Catcrafts/audioreach-topology
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions 2
audioreach-topology/LEMANS-EVK.m4

77 lines
3.4 KiB
Text
Raw Permalink Normal View History

audioreach: QCS9100: Add LEMANS-EVK topology support Add initial topology for LEMANS-EVK Qualcomm board. Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
2025-07-07 15:28:48 +05:30
# Copyright, Linaro Ltd, 2023
# SPDX-License-Identifier: BSD-3-Clause
include(`audioreach/audioreach.m4')
include(`audioreach/stream-subgraph.m4')
include(`audioreach/device-subgraph.m4')
include(`util/route.m4')
include(`util/mixer.m4')
include(`audioreach/tokens.m4')
#
# Stream SubGraph for MultiMedia Playback
#
# ______________________________________________
# | Sub Graph 1 |
# | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [LOG] |- Kcontrol
# |______________________________________________|
#
dnl Playback MultiMedia1
STREAM_SG_PCM_ADD(audioreach/subgraph-stream-vol-playback.m4, FRONTEND_DAI_MULTIMEDIA1,
`S16_LE', 48000, 48000, 2, 2,
0x00004001, 0x00004001, 0x00006001, `110000')
dnl
dnl Capture MultiMedia2
STREAM_SG_PCM_ADD(audioreach/subgraph-stream-capture.m4, FRONTEND_DAI_MULTIMEDIA2,
audioreach: lemans-evk: Enable stereo capture on MultiMedia2 frontend The LEMANS-EVK capture frontend for MultiMedia2 currently constrains channels to mono (min=1, max=1). This prevents opening the PCM with 2-channel (stereo) configurations and typically leads to: arecord: audio open error: Invalid argument Update the STREAM_SG_PCM_ADD() parameters to allow up to 2 channels (min=1, max=2) for S16_LE at 48 kHz. This aligns the front-end PCM capability with common SoC/codec routes that can support stereo capture, while preserving backward compatibility with mono. Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
2026-01-19 22:36:41 +05:30
`S16_LE', 48000, 48000, 1, 2,
audioreach: QCS9100: Add LEMANS-EVK topology support Add initial topology for LEMANS-EVK Qualcomm board. Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
2025-07-07 15:28:48 +05:30
0x00004003, 0x00004003, 0x00006020, `110000')
dnl
LEMANS-EVK: Add compress offload playback support for MultiMedia3 This change enables compress offload playback support on LEMANS-EVK by adding a dedicated MultiMedia3 playback subgraph and routing it to the PRIMARY_MI2S_RX path. Key changes: * Added a STREAM_SG_PCM_ADD() entry using the subgraph-compress-stream-vol-playback.m4 template * Enabled MultiMedia3 as a playback frontend for PRIMARY_MI2S_RX in mixer and routing definitions * Updated routing to include the 'MultiMedia3, stream2.logger1' path Signed-off-by: Aiyaz Patel <aiyapate@qti.qualcomm.com>
2026-03-09 14:02:26 +05:30
dnl Playback MultiMedia3 (Compress Offload)
STREAM_SG_PCM_ADD(audioreach/subgraph-compress-stream-vol-playback.m4, FRONTEND_DAI_MULTIMEDIA3,
`S16_LE', 48000, 48000, 2, 2,
0x00004002, 0x00004002, 0x00006010, `110000', `true')
dnl
audioreach: lemans: add audio support over lemans edp0 display port update topology to support audio playback over edp0 display port on lemans platform. Signed-off-by: Karthik S <karthik.s@oss.qualcomm.com>
2026-04-20 12:11:13 +05:30
dnl Playback MultiMedia4 (Display Port)
STREAM_SG_PCM_ADD(audioreach/subgraph-stream-vol-playback.m4, FRONTEND_DAI_MULTIMEDIA4,
`S16_LE', 48000, 48000, 2, 2,
0x00004005, 0x00004005, 0x00006030, `110000')
dnl
audioreach: QCS9100: Add LEMANS-EVK topology support Add initial topology for LEMANS-EVK Qualcomm board. Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
2025-07-07 15:28:48 +05:30
#
#
# Device SubGraph for WSA RX0 Backend
#
# ___________________
# | Sub Graph 2 |
# Mixer -| [LOG] -> [WSA EP] |
# |___________________|
#
dnl DEVICE_SG_ADD(stream, stream-dai-id, stream-index,
dnl format, min-rate, max-rate, min-channels, max-channels,
dnl interface-type, interface-index, data-format,
dnl sg-iid-start, cont-iid-start, mod-iid-start
dnl Primary MI2S Playback
DEVICE_SG_ADD(audioreach/subgraph-device-i2s-playback.m4, `Primary', PRIMARY_MI2S_RX,
`S16_LE', 48000, 48000, 2, 2,
audioreach: lemans-evk: Switch I2S data line from SD1 to SD0 for playback (#37) Change the I2S data line configuration from SD1 to SD0 for audio playback on the Lemans-EVK board. The same speaker amplifier is connected to both SD1 and SD0 data lines on the EVK board, but the DVT and PVT board variants only support SD0. This change enables a unified configuration that works across all board variants (EVK, DVT, and PVT), simplifying maintenance and ensuring audio playback functionality on all Lemans platform versions. Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
2025-11-10 16:08:18 +05:30
LPAIF_INTF_TYPE_SDR, I2S_INTF_TYPE_PRIMARY, SD_LINE_IDX_I2S_SD0, DATA_FORMAT_FIXED_POINT,
audioreach: QCS9100: Add LEMANS-EVK topology support Add initial topology for LEMANS-EVK Qualcomm board. Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
2025-07-07 15:28:48 +05:30
0x00004006, 0x00004006, 0x00006060, `PRIMARY_MI2S_RX')
dnl
dnl Tertiary MI2S Capture
DEVICE_SG_ADD(audioreach/subgraph-device-i2s-capture.m4, `Tertiary', TERTIARY_MI2S_TX,
`S16_LE', 48000, 48000, 1, 1,
LPAIF_INTF_TYPE_SDR, I2S_INTF_TYPE_TERTIARY, SD_LINE_IDX_I2S_SD0, DATA_FORMAT_FIXED_POINT,
0x00004008, 0x00004008, 0x00006080, `TERTIARY_MI2S_TX', `TERTIARY_MI2S_TX')
audioreach: lemans: add audio support over lemans edp0 display port update topology to support audio playback over edp0 display port on lemans platform. Signed-off-by: Karthik S <karthik.s@oss.qualcomm.com>
2026-04-20 12:11:13 +05:30
dnl Display port0 Playback
DEVICE_SG_ADD(audioreach/subgraph-device-display-port-playback.m4, `DISPLAY_PORT_RX_0', DISPLAY_PORT_RX_0,
`S16_LE', 48000, 48000, 2, 2,
0, 0, 0, DATA_FORMAT_FIXED_POINT,
0x00004012, 0x00004012, 0x00006120, `DISPLAY_PORT_RX_0')
dnl
audioreach: QCS9100: Add LEMANS-EVK topology support Add initial topology for LEMANS-EVK Qualcomm board. Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
2025-07-07 15:28:48 +05:30
LEMANS-EVK: Add compress offload playback support for MultiMedia3 This change enables compress offload playback support on LEMANS-EVK by adding a dedicated MultiMedia3 playback subgraph and routing it to the PRIMARY_MI2S_RX path. Key changes: * Added a STREAM_SG_PCM_ADD() entry using the subgraph-compress-stream-vol-playback.m4 template * Enabled MultiMedia3 as a playback frontend for PRIMARY_MI2S_RX in mixer and routing definitions * Updated routing to include the 'MultiMedia3, stream2.logger1' path Signed-off-by: Aiyaz Patel <aiyapate@qti.qualcomm.com>
2026-03-09 14:02:26 +05:30
STREAM_DEVICE_PLAYBACK_MIXER(PRIMARY_MI2S_RX, ``PRIMARY_MI2S_RX'', ``MultiMedia1'', ``MultiMedia3'')
STREAM_DEVICE_PLAYBACK_ROUTE(PRIMARY_MI2S_RX, ``PRIMARY_MI2S_RX Audio Mixer'', ``MultiMedia1, stream0.logger1'', ``MultiMedia3, stream2.logger1'')
audioreach: QCS9100: Add LEMANS-EVK topology support Add initial topology for LEMANS-EVK Qualcomm board. Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
2025-07-07 15:28:48 +05:30
audioreach: lemans: add audio support over lemans edp0 display port update topology to support audio playback over edp0 display port on lemans platform. Signed-off-by: Karthik S <karthik.s@oss.qualcomm.com>
2026-04-20 12:11:13 +05:30
STREAM_DEVICE_PLAYBACK_MIXER(DISPLAY_PORT_RX_0, ``DISPLAY_PORT_RX_0'', ``MultiMedia4'')
STREAM_DEVICE_PLAYBACK_ROUTE(DISPLAY_PORT_RX_0, ``DISPLAY_PORT_RX_0 Audio Mixer'', ``MultiMedia4, stream3.logger1'')
audioreach: QCS9100: Add LEMANS-EVK topology support Add initial topology for LEMANS-EVK Qualcomm board. Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
2025-07-07 15:28:48 +05:30
dnl STREAM_DEVICE_CAPTURE_MIXER(stream-index, kcontro1, kcontrol2... kcontrolN)
STREAM_DEVICE_CAPTURE_MIXER(FRONTEND_DAI_MULTIMEDIA2, ``TERTIARY_MI2S_TX'')
dnl STREAM_DEVICE_CAPTURE_ROUTE(stream-index, mixer-name, route1, route2.. routeN)
STREAM_DEVICE_CAPTURE_ROUTE(FRONTEND_DAI_MULTIMEDIA2, ``MultiMedia2 Mixer'', ``TERTIARY_MI2S_TX, device21.logger1'')
Reference in a new issue Copy permalink