From 325aa0b7d45fac947da890b6a0756c12bc212594 Mon Sep 17 00:00:00 2001 From: Jorijn van der Graaf Date: Wed, 14 Oct 2026 17:38:55 +0200 Subject: [PATCH 1/4] fp6-vendor-blobs 1-r4: build the ath11k board data from the stock modem partition The device tree asks ath11k for the Fairphone_Gen_6 board data entry. Upstream linux-firmware's WCN6750 board-2.bin has no Fairphone entry, so the driver silently falls back to the generic board-id 255 data: the FP6 Plus does not associate on it at all (user report 2026-10-14), and the FP6 keeps its channel list but its scans no longer find the 5 GHz networks around it (two scans found 0 and 1 5 GHz BSSes against 14 with the device's data, the home AP at -37 dBm among the missing), so it associates on 2.4 GHz only (dev phone A/B). The stock modem partition carries the device's own calibration as image/qca6750/bdwlan.elf. New manifest directive ath11k-bdf: copy that ELF and wrap it into a container under /lib/firmware/updates (searched first by the loader) that is upstream's board-2.bin with every entry kept plus one BOARD entry under the requested name. Verified structurally (ELF magic, size, the container magic), no hash pin: the ELF belongs to the stock modem image and can change with it. The sha256 of the base is kept beside the override: a changed base (a linux-firmware upgrade) rebuilds it at the next run, and a rebuild that reproduces the existing file installs nothing; an entry upstream ships under the same name is taken first by the driver, so the appended copy then goes unused. The fragment has no rebind line: the service is ordered before udev's coldplug, which loads the driver, so a fresh install builds the container before the first probe (dev phone, the override removed and rebooted: built at 7.2 s, coldplug from 7.3 s, the driver's board-data load at 8.7 s, the first association on 5 GHz), and an installed phone gets it at its next boot; a re-probe from a package hook would restart wifi in the middle of the upgrade. zstd joins the dependencies to read the compressed base. Dev phone: the built container is byte-identical to the one hand-made from the stock image by the reporter (sha256 186202ee...); the hook's call with the override absent built it over a wifi session that stayed up, a second call installed nothing and a --refresh call left the container unchanged. --- .../30-ath11k-board-data.manifest | 17 +++ aports/device/fp6-vendor-blobs/APKBUILD | 22 ++-- .../fp6-vendor-blobs/fp6-vendor-blobs-extract | 104 +++++++++++++++++- 3 files changed, 133 insertions(+), 10 deletions(-) create mode 100644 aports/device/fp6-vendor-blobs/30-ath11k-board-data.manifest diff --git a/aports/device/fp6-vendor-blobs/30-ath11k-board-data.manifest b/aports/device/fp6-vendor-blobs/30-ath11k-board-data.manifest new file mode 100644 index 0000000..0e4be6d --- /dev/null +++ b/aports/device/fp6-vendor-blobs/30-ath11k-board-data.manifest @@ -0,0 +1,17 @@ +# WCN6750 WLAN board data (calibration, Qualcomm/Fairphone) - taken from the +# stock modem partition on-device instead of being shipped (fp6 repo +# journal/base/ 2026-10-14, journal/blobs/). The device tree asks ath11k for +# the Fairphone_Gen_6 entry; upstream linux-firmware's board-2.bin has none, +# the driver silently falls back to generic data, and on that the FP6 Plus +# does not associate at all (user report 2026-10-14) while the FP6's scans +# no longer find the 5 GHz networks around it, so it associates on 2.4 GHz +# only (dev phone A/B 2026-11-01). The container built here is upstream's +# file with every entry kept plus the device's own bdwlan.elf under the +# requested name; it lives in /lib/firmware/updates, which the loader +# searches first. Active slot first, the other slot as fallback; no hash pin +# - the ELF belongs to the stock modem image and can change with it. No +# rebind line: the service runs before the driver loads, so a fresh install +# has the container at the first probe and an installed phone gets it at +# its next boot - a re-probe from a package hook would restart wifi in the +# middle of an upgrade. +ath11k-bdf modem_a,modem_b image/qca6750/bdwlan.elf bus=ahb,qmi-chip-id=1,qmi-board-id=255,variant=Fairphone_Gen_6 /usr/lib/firmware/ath11k/WCN6750/hw1.0/board-2.bin.zst /usr/lib/firmware/updates/ath11k/WCN6750/hw1.0/board-2.bin diff --git a/aports/device/fp6-vendor-blobs/APKBUILD b/aports/device/fp6-vendor-blobs/APKBUILD index b74bddc..f73e7e2 100644 --- a/aports/device/fp6-vendor-blobs/APKBUILD +++ b/aports/device/fp6-vendor-blobs/APKBUILD @@ -12,28 +12,33 @@ # drops a previously-shipped blob restores the file immediately instead of # at the next boot (--refresh in addition for an mbn consumer: it re-derives # the trustlet from the active slot even if a file is present). Consumers: -# soc-fairphone-fp6-audio (aw88261 acf), fingerprintd (focal64 trustlet). +# soc-fairphone-fp6-audio (aw88261 acf), fingerprintd (focal64 trustlet); +# this package's own 30-ath11k-board-data fragment (WLAN board data). # # 1-r3 (2026-09-11): active slot first, an unpinned ('-') structurally # verified mode for mbn, --refresh -- after two field units got no # fingerprint sensor from a whole-image hash pin that can only match one # Android build (fp6 repo journal/blobs/, journal/fingerprint/). +# 1-r4 (2026-10-14): the ath11k-bdf directive -- the WLAN board data the +# device tree asks for, built on-device from the stock modem partition +# (the FP6 Plus does not associate on upstream's generic data). maintainer="Jorijn van der Graaf " pkgname=fp6-vendor-blobs pkgver=1 -pkgrel=3 +pkgrel=4 pkgdesc="On-device extraction of vendor blobs from the stock Android partitions" url="https://forgejo.catcrafts.net/Catcrafts/fp6-img" arch="noarch" license="GPL-3.0-only" # fallback mapper for when the initramfs didn't map the dynamic partitions -depends="make-dynpart-mappings" +depends="make-dynpart-mappings zstd" install="$pkgname.post-upgrade" options="!check" source=" fp6-vendor-blobs-extract fp6-vendor-blobs.service fp6-vendor-blobs.preset + 30-ath11k-board-data.manifest " package() { @@ -42,8 +47,9 @@ package() { install -Dm644 "$srcdir"/fp6-vendor-blobs.service \ "$pkgdir"/usr/lib/systemd/system/fp6-vendor-blobs.service # enabled unconditionally: the unit is a fast no-op once every manifest - # dest exists, and blobs appearing on first boot must not depend on a - # manual systemctl enable. sysinit = the real (pre-coldplug) run; + # dest exists and every ath11k-bdf override is current against its base, + # and blobs appearing on first boot must not depend on a manual + # systemctl enable. sysinit = the real (pre-coldplug) run; # multi-user = the post-udev retry if the early run failed (see unit) mkdir -p "$pkgdir"/etc/systemd/system/sysinit.target.wants \ "$pkgdir"/etc/systemd/system/multi-user.target.wants @@ -58,11 +64,13 @@ package() { # extracted, no sound card. See journal/blobs/ 2026-08-28. install -Dm644 "$srcdir"/fp6-vendor-blobs.preset \ "$pkgdir"/usr/lib/systemd/system-preset/50-fp6-vendor-blobs.preset - mkdir -p "$pkgdir"/usr/share/fp6-vendor-blobs/manifest.d + install -Dm644 "$srcdir"/30-ath11k-board-data.manifest \ + "$pkgdir"/usr/share/fp6-vendor-blobs/manifest.d/30-ath11k-board-data.manifest } sha512sums=" -e9618b4a1ccbe0913a608b32a1a9e87337e3da79a3d7ccc7f49292ae9aaa9406d2ea9817d63b3cfff2c4346b80dd2476c10725f4f0f95c859acd17b22ec03a16 fp6-vendor-blobs-extract +6aee5f56bc7bc960537b7ca1069305b56a5ec8da99a58298ba1715e93f002d391a2bd24be78214428b0297f9e3cfd1003a243c76a2d08397dcac63a7d800d302 fp6-vendor-blobs-extract b4c290095d9f39515378dfef08de720ce49324210342aa13c131dfce1103785e796e6f821f0c659671a4c44b46f466ce0e03f11f216fdcdee2a99db5e7970800 fp6-vendor-blobs.service 9e79dd0aed13f11a71282aa24b2a26331e85c105e25ab0c0fed6189b8c300769a5f4308b18b91d9855868d658ad3a57c03e26c9b11bd27fd5e03f9a5decbbd6a fp6-vendor-blobs.preset +f13d7b384a9b577762693c6831fbf28cb9e92e4f943af1917ddeba121c582f0c85c81a3e01e8e9ff6367c3717b6c37743f019db297f75339871292cf816bfc91 30-ath11k-board-data.manifest " diff --git a/aports/device/fp6-vendor-blobs/fp6-vendor-blobs-extract b/aports/device/fp6-vendor-blobs/fp6-vendor-blobs-extract index 7f5b940..650d7cc 100644 --- a/aports/device/fp6-vendor-blobs/fp6-vendor-blobs-extract +++ b/aports/device/fp6-vendor-blobs/fp6-vendor-blobs-extract @@ -11,6 +11,7 @@ # # file # mbn +# ath11k-bdf # rebind # # Partition lists are tried in the order written, except that on an A/B @@ -47,6 +48,24 @@ # itself and refuses a damaged or foreign image (one flipped byte -> # ERROR_ELF_SIGNATURE_ERROR, measured 2026-09-03). The sha256 of what was # installed is logged either way. +# ath11k-bdf: the WLAN board data (calibration) the device tree asks ath11k +# for by name, e.g. bus=ahb,qmi-chip-id=1,qmi-board-id=255,variant=Fairphone_Gen_6. +# Upstream linux-firmware's board-2.bin carries no Fairphone entry, so the +# driver silently falls back to the generic board-id data; the FP6 Plus does +# not associate on it (user report 2026-10-14, fp6 repo journal/base/). The +# stock modem partition has the device's own file (image/qca6750/bdwlan.elf). +# This directive copies it and wraps it into a container at (the +# loader searches /lib/firmware/updates first): (board-2.bin or +# board-2.bin.zst, every upstream entry kept byte for byte) + one BOARD +# entry named holding the ELF. Verified structurally (ELF +# magic, sane size, the container's own magic), never by a pinned hash: +# the ELF belongs to the stock modem image and can change with it. +# The driver takes the first BOARD entry whose name matches, so an entry +# upstream ships under the same name is used before the appended copy. +# The sha256 of the used is kept in .fp6-base: a that +# changed since (a linux-firmware upgrade) rebuilds at the next +# run, and so does --refresh. A rebuild that reproduces the existing +# byte for byte installs nothing and does not count as extracted. # rebind: if this fragment's run extracted at least one file, unbind and # re-probe on so the consuming driver picks the file up # in the same boot. Unconditional on purpose: a still-bound consumer may @@ -64,8 +83,9 @@ # --if-device: exit 0 quietly when no stock super partition is visible # (apk post-install scripts run inside build/CI chroots too; on images # built there the first-boot service does the real extraction). -# --refresh: re-derive every mbn dest even if it exists, replacing it only -# with an image that verifies (a failed refresh leaves the old file). For +# --refresh: re-derive every mbn and ath11k-bdf dest even if it exists, +# replacing it only with an image that verifies (a failed refresh leaves +# the old file). For # the consumer's post-install/post-upgrade: a fresh 'apk add' gets its # trustlet without a reboot, and a trustlet that was hand-placed or pinned # to another build is replaced by the active slot's on the next upgrade. @@ -257,6 +277,76 @@ extract_mbn() { # fail "no listed partition ($parts) yields $rname with sha256 $want - $dest NOT installed$kept" } +# One little-endian u32 as four raw bytes (busybox printf, octal escapes). +le32() { # + printf "\\$(printf %03o $(($1 & 255)))\\$(printf %03o $((($1 >> 8) & 255)))\\$(printf %03o $((($1 >> 16) & 255)))\\$(printf %03o $((($1 >> 24) & 255)))" +} +pad4() { # -> bytes of zero padding to the next multiple of 4, on stdout + n=$(( (4 - $1 % 4) % 4 )) + [ "$n" -gt 0 ] && head -c "$n" /dev/zero + return 0 +} +# .fp6-base records the sha256 of the was built from. +bdf_base_id() { sha256sum "$1" | awk '{print $1}'; } +bdf_current() { # - true when exists and was built from this + [ -f "$1" ] && [ -e "$2" ] && [ -f "$2.fp6-base" ] || return 1 + read -r bh bs < "$2.fp6-base" + [ "$bh" = "$(bdf_base_id "$1")" ] +} +extract_ath11k_bdf() { # + parts=$1 bsrc=$2 bname=$3 bbase=$4 bdest=$5 + [ -f "$bbase" ] || fail "ath11k-bdf: base container $bbase missing" + bid=$(bdf_base_id "$bbase") + braw="$bdest.fp6-raw.$$" + mkdir -p "${bdest%/*}" || fail "cannot create ${bdest%/*}" + case "$bbase" in + *.zst) zstd -dcq "$bbase" > "$braw" 2>/dev/null || { rm -f "$braw"; fail "ath11k-bdf: cannot decompress $bbase"; } ;; + *) cp "$bbase" "$braw" || { rm -f "$braw"; fail "ath11k-bdf: cannot read $bbase"; } ;; + esac + [ "$(head -c 16 "$braw")" = "QCA-ATH11K-BOARD" ] || { rm -f "$braw"; fail "ath11k-bdf: $bbase is not a QCA-ATH11K-BOARD container"; } + # the driver walks the entries 4-byte aligned; an entry appended to an + # unaligned base would be misread and the generic data used silently + bsz=$(fsize "$braw") + [ $(( bsz % 4 )) -eq 0 ] || { rm -f "$braw"; fail "ath11k-bdf: $bbase is $bsz bytes, not a multiple of 4"; } + for part in $(order_parts "$parts"); do + mount_part "$part" || { log "$part: not mountable, trying next"; continue; } + elf="$MNT/$bsrc" + [ -f "$elf" ] || { log "$part: no $bsrc, trying next"; continue; } + esz=$(fsize "$elf") + [ "$(hex4 "$elf")" = 7f454c46 ] || { log "$part:$bsrc: not an ELF image, trying next"; continue; } + [ "$esz" -ge 4096 ] && [ "$esz" -le $((1024 * 1024)) ] || { log "$part:$bsrc: $esz bytes is not a board data file, trying next"; continue; } + nlen=${#bname} + npad=$(( (nlen + 3) / 4 * 4 )) + dpad=$(( (esz + 3) / 4 * 4 )) + tmp="$bdest.fp6-extract.$$" + # container = base + BOARD IE { NAME IE, DATA IE }, each IE padded to 4 + { + cat "$braw" + le32 0; le32 $((8 + npad + 8 + dpad)) + le32 0; le32 "$nlen"; printf '%s' "$bname"; pad4 "$nlen" + le32 1; le32 "$esz"; cat "$elf"; pad4 "$esz" + } > "$tmp" 2>/dev/null || { rm -f "$tmp"; fail "ath11k-bdf: writing $tmp failed"; } + want=$(( $(fsize "$braw") + 8 + 8 + npad + 8 + dpad )) + tsz=$(fsize "$tmp") + [ "$tsz" -eq "$want" ] || { rm -f "$tmp" "$braw"; fail "ath11k-bdf: $tmp is $tsz bytes, expected $want"; } + got=$(sha256sum "$tmp" | awk '{print $1}') + if [ -e "$bdest" ] && [ "$(sha256sum "$bdest" | awk '{print $1}')" = "$got" ]; then + rm -f "$tmp" "$braw" + echo "$bid" > "$bdest.fp6-base" || fail "ath11k-bdf: cannot write $bdest.fp6-base" + log "ath11k-bdf: $bdest is already $bbase + $bname from $part:$bsrc (sha256 $got) - unchanged" + return 2 + fi + chmod 644 "$tmp" && mv "$tmp" "$bdest" || { rm -f "$tmp" "$braw"; fail "installing $bdest failed"; } + echo "$bid" > "$bdest.fp6-base" || fail "ath11k-bdf: cannot write $bdest.fp6-base" + rm -f "$braw" + log "built $bdest = $bbase + $bname from $part:$bsrc ($esz bytes, sha256 $got)" + return 0 + done + rm -f "$braw" + kept= + [ -e "$bdest" ] && kept=" (the existing file is left in place)" + fail "no listed partition ($parts) yields a well-formed $bsrc - $bdest NOT installed$kept" +} extract() { # parts=$1 src=$2 dest=$3 want=$4 for part in $(order_parts "$parts"); do @@ -312,7 +402,8 @@ fi [ -d "$MANIFEST_DIR" ] || exit 0 -# fast path for every boot after the first: all dests already present +# fast path for every boot after the first: every file/mbn dest present and +# every ath11k-bdf dest current against its base (bdf_current) missing= for f in "$MANIFEST_DIR"/*.manifest; do [ -e "$f" ] || continue @@ -320,6 +411,7 @@ for f in "$MANIFEST_DIR"/*.manifest; do case "$kind" in file) [ -e "$c" ] || missing=1 ;; mbn) [ -e "$d" ] && [ -z "$REFRESH" ] || missing=1 ;; + ath11k-bdf) [ -z "$REFRESH" ] && bdf_current "$d" "$e" || missing=1 ;; esac done < "$f" done @@ -345,6 +437,12 @@ for f in "$MANIFEST_DIR"/*.manifest; do extract_mbn "$a" "$b" "$c" "$d" "$e" Date: Sat, 31 Oct 2026 03:30:29 +0100 Subject: [PATCH 2/4] soc-fairphone-fp6-audio 5: install the topology and UCM under the 7.3 card model Kernel 7.3 names the FP6 sound card "MILOS-Fairphone-Gen6" (upstream's DTS; 7.2 said "Fairphone (Gen. 6)"). The q6apm topology loader requests qcom/milos/-tplg.bin and alsa-ucm resolves conf.d/milos/.conf, so the two files are installed under the new name, with the old name as a symlink to each; the file contents are unchanged. The files either kernel asks for are present, the one still running between an upgrade and the reboot included, so the package carries no version bound to the kernel. A new pkgver rather than a pkgrel, so the kernel can name the floor: pmbootstrap resolves a versioned dependency on an aport by pkgver alone. Dev phone with these files: on 7.3 the card MILOS-Fairphone-Gen6 is up with UCM verb HiFi, its playback PCM runs under pw-play and capture passes; booted into 7.2 the card Fairphone (Gen. 6) finds its UCM through the link and capture passes as well. --- aports/device/soc-fairphone-fp6-audio/APKBUILD | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/aports/device/soc-fairphone-fp6-audio/APKBUILD b/aports/device/soc-fairphone-fp6-audio/APKBUILD index 0478cce..1d603ae 100644 --- a/aports/device/soc-fairphone-fp6-audio/APKBUILD +++ b/aports/device/soc-fairphone-fp6-audio/APKBUILD @@ -2,7 +2,12 @@ # yet: the AudioReach topology (built from Catcrafts/audioreach-topology # branch fp6), the UCM profile, and pipewire config. Files are # byte-identical to the ones deployed and tested on the development FP6. -# The tplg/UCM target filenames contain spaces, hence the safe source names. +# The tplg/UCM target filenames carry the sound card model string from the +# board DTS: the q6apm topology loader requests qcom/milos/-tplg.bin +# and alsa-ucm resolves conf.d/milos/.conf. Kernel 7.3 names the card +# "MILOS-Fairphone-Gen6", 7.2 named it "Fairphone (Gen. 6)"; both files are +# installed under the new name with the old name as a symlink, so the package +# serves either kernel - the one still running after an upgrade included. # # The proprietary AW88261 amp config blob (aw88261_acf.bin) is NOT shipped # since pkgver 4: fp6-vendor-blobs extracts it from the stock vendor @@ -10,8 +15,8 @@ # distributed. Provenance/design: fp6 repo journal/blobs/. maintainer="Jorijn van der Graaf " pkgname=soc-fairphone-fp6-audio -pkgver=4 -pkgrel=1 +pkgver=5 +pkgrel=0 pkgdesc="Fairphone 6 audio topology and UCM profile" url="https://forgejo.catcrafts.net/Catcrafts/audioreach-topology" arch="noarch" @@ -29,10 +34,14 @@ source=" package() { install -Dm644 "$srcdir"/fp6-tplg.bin \ + "$pkgdir"/usr/lib/firmware/qcom/milos/MILOS-Fairphone-Gen6-tplg.bin + ln -s MILOS-Fairphone-Gen6-tplg.bin \ "$pkgdir/usr/lib/firmware/qcom/milos/Fairphone (Gen. 6)-tplg.bin" install -Dm644 "$srcdir"/aw88261-acf.manifest \ "$pkgdir"/usr/share/fp6-vendor-blobs/manifest.d/10-aw88261-acf.manifest install -Dm644 "$srcdir"/ucm-milos-fp6.conf \ + "$pkgdir"/usr/share/alsa/ucm2/conf.d/milos/MILOS-Fairphone-Gen6.conf + ln -s MILOS-Fairphone-Gen6.conf \ "$pkgdir/usr/share/alsa/ucm2/conf.d/milos/Fairphone (Gen. 6).conf" install -Dm644 "$srcdir"/HiFi.conf \ "$pkgdir"/usr/share/alsa/ucm2/Fairphone/fp6/HiFi.conf From 57f4ff9b1ecc2e10d7b812f0df1fb835f098877a Mon Sep 17 00:00:00 2001 From: Jorijn van der Graaf Date: Sat, 31 Oct 2026 20:49:53 +0100 Subject: [PATCH 3/4] build.yml: publish the kernel apk last The publish step uploads one apk at a time, in glob order, and stops at the first failed upload. With the kernel apk before soc-fairphone-fp6-audio in that order, a failure in between would leave the registry serving a kernel without the package that carries its card name's topology and UCM (the combined-stable tip CI builds names the card MILOS-Fairphone-Gen6 since 7.3; only soc-fairphone-fp6-audio >= 5 has those files, and without them that kernel boots with no sound card). Upload everything else first, the kernel last. --- .forgejo/workflows/build.yml | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/.forgejo/workflows/build.yml b/.forgejo/workflows/build.yml index c5eccf6..ae0387c 100644 --- a/.forgejo/workflows/build.yml +++ b/.forgejo/workflows/build.yml @@ -73,21 +73,33 @@ jobs: fi apk add -q curl found=0 - for f in /home/build/.local/var/pmbootstrap/packages/*/aarch64/*.apk; do - [ -e "$f" ] || continue - case "$(basename "$f")" in - imsd-*|fingerprintd-*) echo "registry-sourced, not republished: $(basename "$f")"; continue ;; - libqmi-*|qmi-utils-*) echo "retired fork, not republished: $(basename "$f")"; continue ;; + publish() { + case "$(basename "$1")" in + imsd-*|fingerprintd-*) echo "registry-sourced, not republished: $(basename "$1")"; return 0 ;; + libqmi-*|qmi-utils-*) echo "retired fork, not republished: $(basename "$1")"; return 0 ;; esac found=1 code=$(curl -s -o /dev/null -w '%{http_code}' \ - --user "catbot:$PACKAGE_TOKEN" --upload-file "$f" \ + --user "catbot:$PACKAGE_TOKEN" --upload-file "$1" \ "https://forgejo.catcrafts.net/api/packages/Catcrafts/alpine/edge/fp6") case "$code" in - 201) echo "published: $(basename "$f")" ;; - 409) echo "already published: $(basename "$f")" ;; - *) echo "FAILED ($code): $(basename "$f")"; exit 1 ;; + 201) echo "published: $(basename "$1")" ;; + 409) echo "already published: $(basename "$1")" ;; + *) echo "FAILED ($code): $(basename "$1")"; exit 1 ;; esac + } + # The kernel goes last: a publish that fails part-way (the first + # failed upload ends this step) must never leave the registry serving + # a kernel without the userspace its card name needs - the 7.3 kernel + # has its topology and UCM only in soc-fairphone-fp6-audio >= 5. + for f in /home/build/.local/var/pmbootstrap/packages/*/aarch64/*.apk; do + [ -e "$f" ] || continue + case "$(basename "$f")" in linux-postmarketos-qcom-milos-*) continue ;; esac + publish "$f" + done + for f in /home/build/.local/var/pmbootstrap/packages/*/aarch64/linux-postmarketos-qcom-milos-*.apk; do + [ -e "$f" ] || continue + publish "$f" done [ "$found" = 1 ] || { echo "no packages found to publish"; exit 1; } From 9defc5a1a9ea3b11a401f52d8d664815d98c36b3 Mon Sep 17 00:00:00 2001 From: Jorijn van der Graaf Date: Sat, 31 Oct 2026 03:31:00 +0100 Subject: [PATCH 4/4] linux-postmarketos-qcom-milos 7.3.0: the kernel follows combined-stable onto v7.3.0-milos The source branch moved to Luca Weiss's v7.3.0-milos tag (the carries that mainline 7.3 absorbed are gone, the rest rebased, plus the in-flight QRTR HELLO fix the modem needs at boot). The config is the 7.2 image config run through olddefconfig on the new tree, with TOUCHSCREEN_ESWIN_EPH8621=y (the upstream touchscreen driver replaces 7.2's unconditional downstream one; without it the image has no touch) and HW_RANDOM_QCOM=y (CRYPTO_DEV_QCOM_RNG moved to hw_random). QCE is marked BROKEN upstream and drops out, which left the DT node crypto@1dfa000 without a driver: an interconnect consumer that never probes kept the qnoc-milos providers from reaching sync_state and every bus at its boot-time maximum vote, in sleep too; combined-stable disables the node (c35fa276b496), which CI picks up with the tip. ARM64_BTI_KERNEL is excluded for clang >= 21 by the base. The package depends on soc-fairphone-fp6-audio >= 5: the 7.3 card name has its topology and UCM only there, and booted with the version 4 files this kernel has no sound card at all (the topology load fails, the card does not instantiate). The 7.1-era resolve_btfids patch goes: this config has DEBUG_INFO_REDUCED=y, so BTF is off and the tool it fixes is never built (pmaports dropped it at 7.2.0 as well). pmaports still ships 7.2.0 for this device. --- ...reserve-tag-and-parameter-names-when.patch | 91 --------- .../linux-postmarketos-qcom-milos/APKBUILD | 24 ++- .../config-postmarketos-qcom-milos.aarch64 | 177 ++++++++++++------ 3 files changed, 137 insertions(+), 155 deletions(-) delete mode 100644 aports/device/linux-postmarketos-qcom-milos/0001-resolve_btfids-preserve-tag-and-parameter-names-when.patch diff --git a/aports/device/linux-postmarketos-qcom-milos/0001-resolve_btfids-preserve-tag-and-parameter-names-when.patch b/aports/device/linux-postmarketos-qcom-milos/0001-resolve_btfids-preserve-tag-and-parameter-names-when.patch deleted file mode 100644 index 01889a4..0000000 --- a/aports/device/linux-postmarketos-qcom-milos/0001-resolve_btfids-preserve-tag-and-parameter-names-when.patch +++ /dev/null @@ -1,91 +0,0 @@ -From d648a5fd7f95d961126605d59da5ad007c265bda Mon Sep 17 00:00:00 2001 -From: Aelin Reidel -Date: Wed, 17 Jun 2026 00:38:17 +0200 -Subject: [PATCH] resolve_btfids: preserve tag and parameter names when - processing implicit args - -process_kfunc_with_implicit_args() obtains parameter names through -btf__name_by_offset() and passes them to btf__add_func_param() while -constructing a new function prototype. Tag names are processed in a -similar fashion. - -The returned name pointer references memory owned by the BTF object. -btf__add_func_param(), btf__add_decl_tag(), etc. modify the same BTF and -may grow its internal storage, invalidating previously returned string -pointers. - -This can result in btf__add_func_param(), btf__add_decl_tag(), etc. -dereferencing a stale pointer when copying the string, leading to crashes -in strset__add_str(). - -Duplicate the parameter name before calling btf__add_func_param() so it -remains valid across BTF updates. - -Fixes: 9d199965990c ("resolve_btfids: Support for KF_IMPLICIT_ARGS") -Cc: stable@vger.kernel.org -Signed-off-by: Aelin Reidel ---- - tools/bpf/resolve_btfids/main.c | 20 +++++++++++++++----- - 1 file changed, 15 insertions(+), 5 deletions(-) - -diff --git a/tools/bpf/resolve_btfids/main.c b/tools/bpf/resolve_btfids/main.c -index f8a91fa7584f..94b89e9c942e 100644 ---- a/tools/bpf/resolve_btfids/main.c -+++ b/tools/bpf/resolve_btfids/main.c -@@ -1113,6 +1113,7 @@ static int process_kfunc_with_implicit_args(struct btf2btf_context *ctx, struct - { - s32 idx, new_proto_id, new_func_id, proto_id; - const char *param_name, *tag_name; -+ char *tmp_param_name, *tmp_tag_name; - const struct btf_param *params; - enum btf_func_linkage linkage; - char tmp_name[KSYM_NAME_LEN]; -@@ -1163,18 +1164,22 @@ static int process_kfunc_with_implicit_args(struct btf2btf_context *ctx, struct - if (strcmp(tag_name, "bpf_kfunc") == 0) - continue; - -+ tmp_tag_name = strdup(tag_name); - idx = btf_decl_tag(t)->component_idx; - - if (btf_kflag(t)) -- err = btf__add_decl_attr(btf, tag_name, new_func_id, idx); -+ err = btf__add_decl_attr(btf, tmp_tag_name, new_func_id, idx); - else -- err = btf__add_decl_tag(btf, tag_name, new_func_id, idx); -+ err = btf__add_decl_tag(btf, tmp_tag_name, new_func_id, idx); - - if (err < 0) { - pr_err("ERROR: resolve_btfids: failed to add decl tag %s for %s\n", -- tag_name, tmp_name); -+ tmp_tag_name, tmp_name); -+ free(tmp_tag_name); - return -EINVAL; - } -+ -+ free(tmp_tag_name); - } - - add_new_proto: -@@ -1193,12 +1198,17 @@ static int process_kfunc_with_implicit_args(struct btf2btf_context *ctx, struct - if (is_kf_implicit_arg(btf, ¶ms[i])) - break; - param_name = btf__name_by_offset(btf, params[i].name_off); -- err = btf__add_func_param(btf, param_name, params[i].type); -+ tmp_param_name = strdup(param_name); -+ if (!tmp_param_name) -+ return -ENOMEM; -+ err = btf__add_func_param(btf, tmp_param_name, params[i].type); - if (err < 0) { - pr_err("ERROR: resolve_btfids: failed to add param %s for %s\n", -- param_name, kfunc->name); -+ tmp_param_name, kfunc->name); -+ free(tmp_param_name); - return err; - } -+ free(tmp_param_name); - t = (struct btf_type *)btf__type_by_id(btf, proto_id); - } - --- -2.54.0 - diff --git a/aports/device/linux-postmarketos-qcom-milos/APKBUILD b/aports/device/linux-postmarketos-qcom-milos/APKBUILD index 6e3c06f..acfadb1 100644 --- a/aports/device/linux-postmarketos-qcom-milos/APKBUILD +++ b/aports/device/linux-postmarketos-qcom-milos/APKBUILD @@ -1,12 +1,15 @@ -# Fork of pmaports device/testing/linux-postmarketos-qcom-milos (7.2.0-r0), -# overlaid via pmbootstrap so it shadows the upstream aport. Differences: -# source is the Catcrafts combined-stable branch (upstream v7.2.0-milos tag + -# the FP6 bring-up carries), and the config is the exact one the development -# FP6 runs, plus CONFIG_EFI_ZBOOT for the packaging below. +# Fork of pmaports device/testing/linux-postmarketos-qcom-milos (7.2.0-r0; pmaports +# still ships 7.2.0), overlaid via pmbootstrap so it shadows the upstream aport. +# Differences: source is the Catcrafts combined-stable branch (upstream +# v7.3.0-milos tag + the FP6 bring-up carries); the config is the exact one +# the development FP6 runs, plus CONFIG_EFI_ZBOOT for the packaging below; +# build() targets the FP6's own cores (KCFLAGS); and the package depends on +# soc-fairphone-fp6-audio >= 5, which carries the topology and UCM for the +# card name the 7.3 DTS uses. maintainer="Jorijn van der Graaf " _flavor="postmarketos-qcom-milos" pkgname=linux-$_flavor -pkgver=7.2.0 +pkgver=7.3.0 # always sorts above the upstream aport (r0..r99) pkgrel=103 pkgdesc="Milos mainline kernel + Catcrafts FP6 bring-up carries (combined-stable)" @@ -14,6 +17,13 @@ arch="aarch64" _carch="arm64" url="https://forgejo.catcrafts.net/Catcrafts/milos-linux" license="GPL-2.0-only" +# The 7.3 DTS names the sound card MILOS-Fairphone-Gen6; only +# soc-fairphone-fp6-audio >= 5 installs the topology and UCM under that +# name. Without this bound a kernel-only upgrade boots with no sound card at +# all: the topology load fails and the card does not instantiate. +# A pkgver floor, not a pkgrel one: pmbootstrap resolves a versioned +# dependency on an aport against its pkgver alone. +depends="soc-fairphone-fp6-audio>=5" options="!strip !check !tracedeps pmb:cross-native pmb:kconfigcheck-community @@ -45,7 +55,6 @@ _commit="REPLACED_BY_CI" source=" milos-linux-$_commit.tar.gz - 0001-resolve_btfids-preserve-tag-and-parameter-names-when.patch $_config " builddir="$srcdir/milos-linux" @@ -92,6 +101,5 @@ package() { sha512sums=" REPLACED_BY_CI milos-linux-REPLACED_BY_CI.tar.gz -4e705e038a91466a86fc5317b0028c2220aa1e7a4807e5d86db2f9ac815a927c59666a8f21ed50c4632147d3ce183d8042378a76f95341dbcd3db1047faf39e3 0001-resolve_btfids-preserve-tag-and-parameter-names-when.patch REPLACED_BY_CI config-postmarketos-qcom-milos.aarch64 " diff --git a/aports/device/linux-postmarketos-qcom-milos/config-postmarketos-qcom-milos.aarch64 b/aports/device/linux-postmarketos-qcom-milos/config-postmarketos-qcom-milos.aarch64 index 4ae9b46..f331623 100644 --- a/aports/device/linux-postmarketos-qcom-milos/config-postmarketos-qcom-milos.aarch64 +++ b/aports/device/linux-postmarketos-qcom-milos/config-postmarketos-qcom-milos.aarch64 @@ -1,16 +1,16 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/arm64 7.2.0 Kernel Configuration +# Linux/arm64 7.3.0 Kernel Configuration # -CONFIG_CC_VERSION_TEXT="clang version 22.1.8" +CONFIG_CC_VERSION_TEXT="clang version 23.1.3" CONFIG_GCC_VERSION=0 CONFIG_CC_IS_CLANG=y -CONFIG_CLANG_VERSION=220108 +CONFIG_CLANG_VERSION=230103 CONFIG_AS_IS_LLVM=y -CONFIG_AS_VERSION=220108 +CONFIG_AS_VERSION=230103 CONFIG_LD_VERSION=0 CONFIG_LD_IS_LLD=y -CONFIG_LLD_VERSION=220108 +CONFIG_LLD_VERSION=230103 CONFIG_RUSTC_VERSION=0 CONFIG_RUSTC_LLVM_VERSION=0 CONFIG_RUSTC_LLVM_MAJOR_VERSION=0 @@ -25,8 +25,9 @@ CONFIG_CC_HAS_COUNTED_BY=y CONFIG_CC_HAS_COUNTED_BY_PTR=y CONFIG_CC_HAS_ALLOC_TOKEN=y CONFIG_CC_HAS_MULTIDIMENSIONAL_NONSTRING=y +CONFIG_CC_OPT_INLINE_MEMSET="-mllvm -max-store-memset=4294967294" CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY=y -CONFIG_PAHOLE_VERSION=131 +CONFIG_PAHOLE_VERSION=132 CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_TABLE_SORT=y CONFIG_THREAD_INFO_IN_TASK=y @@ -119,6 +120,7 @@ CONFIG_ARCH_HAS_PREEMPT_LAZY=y CONFIG_PREEMPT=y # CONFIG_PREEMPT_LAZY is not set CONFIG_PREEMPT_COUNT=y +CONFIG_HAS_SEPARATE_PREEMPT_RESCHED_BITS=y CONFIG_PREEMPTION=y # CONFIG_PREEMPT_DYNAMIC is not set # CONFIG_SCHED_CORE is not set @@ -171,11 +173,12 @@ CONFIG_UCLAMP_TASK=y CONFIG_UCLAMP_BUCKETS_COUNT=5 # end of Scheduler features +CONFIG_ARCH_HAS_PTE_PROTNONE=y CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y CONFIG_CC_HAS_INT128=y CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough" -CONFIG_CC_MS_EXTENSIONS="-fms-extensions" +CONFIG_CC_MS_EXTENSIONS="-fms-anonymous-structs" CONFIG_GCC10_NO_ARRAY_BOUNDS=y CONFIG_GCC_NO_STRINGOP_OVERFLOW=y CONFIG_ARCH_SUPPORTS_INT128=y @@ -239,7 +242,6 @@ CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_LD_ORPHAN_WARN=y CONFIG_LD_ORPHAN_WARN_LEVEL="warn" -CONFIG_SYSCTL=y CONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_SYSFS_SYSCALL=y @@ -407,7 +409,7 @@ CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y CONFIG_ARM64_ERRATUM_1165522=y CONFIG_ARM64_ERRATUM_1319367=y CONFIG_ARM64_ERRATUM_1530923=y -CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y +CONFIG_ARM64_WORKAROUND_REPEAT_TLBI_SYNC=y CONFIG_ARM64_ERRATUM_2441007=y CONFIG_ARM64_ERRATUM_1286807=y CONFIG_ARM64_ERRATUM_1463225=y @@ -420,8 +422,10 @@ CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y CONFIG_ARM64_ERRATUM_2054223=y CONFIG_ARM64_ERRATUM_2067961=y CONFIG_ARM64_ERRATUM_2441009=y +CONFIG_ARM64_WORKAROUND_BROKEN_AMU_CONSTCNT=y CONFIG_ARM64_ERRATUM_2457168=y CONFIG_ARM64_ERRATUM_2645198=y +CONFIG_ARM64_ERRATUM_3821522=y CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD=y CONFIG_ARM64_ERRATUM_2966298=y CONFIG_ARM64_ERRATUM_3117295=y @@ -445,6 +449,8 @@ CONFIG_QCOM_QDF2400_ERRATUM_0065=y CONFIG_QCOM_FALKOR_ERRATUM_E1041=y CONFIG_ARM64_WORKAROUND_DISABLE_CNP=y CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y +CONFIG_NVIDIA_OLYMPUS_1027_ERRATUM=y +CONFIG_RENESAS_ERRATUM_GEN4GICITS1=y CONFIG_ROCKCHIP_ERRATUM_3568002=y CONFIG_ROCKCHIP_ERRATUM_3588001=y # CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set @@ -536,7 +542,6 @@ CONFIG_ARM64_TLB_RANGE=y # CONFIG_AS_HAS_ARMV8_5=y CONFIG_ARM64_BTI=y -CONFIG_ARM64_BTI_KERNEL=y CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI=y CONFIG_ARM64_E0PD=y CONFIG_ARM64_AS_HAS_MTE=y @@ -914,6 +919,7 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y CONFIG_LOCK_SPIN_ON_OWNER=y CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y CONFIG_QUEUED_SPINLOCKS=y +# CONFIG_QUEUED_SPINLOCKS_TRACE_CONTENDED_RELEASE is not set CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y @@ -989,7 +995,7 @@ CONFIG_PAGE_REPORTING=y CONFIG_NUMA_MIGRATION=y CONFIG_MIGRATION=y CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y -CONFIG_ARCH_ENABLE_THP_MIGRATION=y +CONFIG_ARCH_HAS_PMD_SOFTLEAVES=y CONFIG_CONTIG_ALLOC=y CONFIG_PCP_BATCH_SCALE_MAX=5 CONFIG_PHYS_ADDR_T_64BIT=y @@ -1056,6 +1062,7 @@ CONFIG_LOCK_MM_AND_FIND_VMA=y CONFIG_EXECMEM=y CONFIG_NUMA_MEMBLKS=y # CONFIG_NUMA_EMU is not set +CONFIG_GENERIC_ARCH_NUMA=y CONFIG_ARCH_HAS_USER_SHADOW_STACK=y CONFIG_PT_RECLAIM=y CONFIG_ARCH_HAS_LAZY_MMU_MODE=y @@ -1723,9 +1730,7 @@ CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y CONFIG_REGMAP_SOUNDWIRE=m CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_DMA_FENCE_TRACE is not set CONFIG_GENERIC_ARCH_TOPOLOGY=y -CONFIG_GENERIC_ARCH_NUMA=y # CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set # end of Generic Driver Options @@ -1814,6 +1819,8 @@ CONFIG_ARM_PSCI_FW=y # # Qualcomm firmware drivers # +CONFIG_QCOM_PAS=y +CONFIG_QCOM_PAS_TEE=m CONFIG_QCOM_SCM=y CONFIG_QCOM_TZMEM=y CONFIG_QCOM_TZMEM_MODE_GENERIC=y @@ -1911,7 +1918,6 @@ CONFIG_QCOM_FASTRPC=m # CONFIG_LATTICE_ECP3_CONFIG is not set CONFIG_SRAM=y # CONFIG_XILINX_SDFEC is not set -# CONFIG_HISI_HIKEY_USB is not set # CONFIG_OPEN_DICE is not set CONFIG_NTSYNC=m # CONFIG_VCPU_STALL_DETECTOR is not set @@ -1921,14 +1927,9 @@ CONFIG_NTSYNC=m # # EEPROM support # -CONFIG_EEPROM_AT24=m -# CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set -# CONFIG_EEPROM_93XX46 is not set # CONFIG_EEPROM_IDT_89HPESX is not set -# CONFIG_EEPROM_EE1004 is not set -# CONFIG_EEPROM_M24LR is not set # end of EEPROM support # CONFIG_SENSORS_LIS3_SPI is not set @@ -1938,6 +1939,8 @@ CONFIG_EEPROM_AT24=m # CONFIG_UACCE is not set # CONFIG_PVPANIC is not set # CONFIG_AMD_SBRMI_I2C is not set +# CONFIG_AMD_SBTSI is not set +# CONFIG_INTEL_SSEI is not set # end of Misc devices # @@ -2090,6 +2093,7 @@ CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_INTEL=y CONFIG_NET_VENDOR_ADI=y # CONFIG_ADIN1110 is not set +# CONFIG_ADIN1140 is not set CONFIG_NET_VENDOR_LITEX=y # CONFIG_LITEX_LITEETH is not set CONFIG_NET_VENDOR_MARVELL=y @@ -2149,6 +2153,7 @@ CONFIG_NET_VENDOR_WIZNET=y CONFIG_NET_VENDOR_XILINX=y # CONFIG_XILINX_EMACLITE is not set # CONFIG_XILINX_LL_TEMAC is not set +CONFIG_NET_VENDOR_ZTE=y CONFIG_QCOM_IPA=m CONFIG_PHYLINK=m CONFIG_PHYLIB=y @@ -2167,6 +2172,7 @@ CONFIG_FIXED_PHY=y # CONFIG_AMD_PHY is not set # CONFIG_ADIN_PHY is not set # CONFIG_ADIN1100_PHY is not set +# CONFIG_ADIN1140_PHY is not set # CONFIG_AQUANTIA_PHY is not set CONFIG_AX88796B_PHY=m # CONFIG_BROADCOM_PHY is not set @@ -2176,6 +2182,7 @@ CONFIG_AX88796B_PHY=m # CONFIG_BCM87XX_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_CORTINA_PHY is not set +# CONFIG_DAP8211R_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_LXT_PHY is not set @@ -2220,6 +2227,10 @@ CONFIG_AX88796B_PHY=m # CONFIG_VITESSE_PHY is not set # CONFIG_XILINX_GMII2RGMII is not set # CONFIG_PSE_CONTROLLER is not set + +# +# MDIO controller drivers +# CONFIG_FWNODE_MDIO=y CONFIG_OF_MDIO=y # CONFIG_MDIO_BITBANG is not set @@ -2237,6 +2248,8 @@ CONFIG_OF_MDIO=y # CONFIG_MDIO_BUS_MUX_GPIO is not set # CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set # CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# end of MDIO Multiplexers +# end of MDIO controller drivers # # PCS device drivers @@ -2333,6 +2346,11 @@ CONFIG_WLAN_VENDOR_MEDIATEK=y CONFIG_WLAN_VENDOR_MICROCHIP=y # CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SPI is not set +CONFIG_WLAN_VENDOR_MORSEMICRO=y +# CONFIG_MM81X_USB is not set +# CONFIG_MM81X_SDIO is not set +CONFIG_WLAN_VENDOR_NXP=y +# CONFIG_NXPWIFI_SDIO is not set CONFIG_WLAN_VENDOR_PURELIFI=y # CONFIG_PLFXLC is not set CONFIG_WLAN_VENDOR_RALINK=y @@ -2484,6 +2502,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_EGALAX is not set # CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set +CONFIG_TOUCHSCREEN_ESWIN_EPH8621=y # CONFIG_TOUCHSCREEN_EXC3000 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GOODIX is not set @@ -2569,6 +2588,7 @@ CONFIG_INPUT_UINPUT=y # CONFIG_INPUT_IQS269A is not set # CONFIG_INPUT_IQS626A is not set # CONFIG_INPUT_IQS7222 is not set +# CONFIG_INPUT_ISA1200_HAPTIC is not set # CONFIG_INPUT_CMA3000 is not set # CONFIG_INPUT_DRV260X_HAPTICS is not set # CONFIG_INPUT_DRV2665_HAPTICS is not set @@ -2693,6 +2713,7 @@ CONFIG_HW_RANDOM_OPTEE=y # CONFIG_HW_RANDOM_CCTRNG is not set # CONFIG_HW_RANDOM_XIPHERA is not set CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=y +CONFIG_HW_RANDOM_QCOM=y # CONFIG_DEVMEM is not set CONFIG_DEVPORT=y # CONFIG_TCG_TPM is not set @@ -2866,6 +2887,7 @@ CONFIG_GENERIC_PINCONF=y # CONFIG_DEBUG_PINCTRL is not set # CONFIG_PINCTRL_AW9523 is not set # CONFIG_PINCTRL_CY8C95X0 is not set +# CONFIG_PINCTRL_GENERIC_MUX is not set # CONFIG_PINCTRL_MCP23S08 is not set # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set # CONFIG_PINCTRL_OCELOT is not set @@ -2886,6 +2908,7 @@ CONFIG_PINCTRL_MSM=y # CONFIG_PINCTRL_IPQ9574 is not set # CONFIG_PINCTRL_IPQ9650 is not set # CONFIG_PINCTRL_KAANAPALI is not set +CONFIG_PINCTRL_MAILI=y # CONFIG_PINCTRL_MDM9607 is not set # CONFIG_PINCTRL_MSM8916 is not set # CONFIG_PINCTRL_MSM8917 is not set @@ -3102,7 +3125,9 @@ CONFIG_BATTERY_QCOM_BATTMGR=y # CONFIG_CHARGER_BQ2515X is not set # CONFIG_CHARGER_BQ25890 is not set # CONFIG_CHARGER_BQ25980 is not set +# CONFIG_CHARGER_BQ25630 is not set # CONFIG_CHARGER_BQ256XX is not set +# CONFIG_CHARGER_SGM41542 is not set # CONFIG_CHARGER_SMB347 is not set # CONFIG_BATTERY_GAUGE_LTC2941 is not set # CONFIG_BATTERY_GOLDFISH is not set @@ -3145,6 +3170,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ASUS_ROG_RYUJIN is not set # CONFIG_SENSORS_AXI_FAN_CONTROL is not set +# CONFIG_SENSORS_KB9002 is not set # CONFIG_SENSORS_ARCTIC_FAN_CONTROLLER is not set # CONFIG_SENSORS_ARM_SCMI is not set # CONFIG_SENSORS_ATXP1 is not set @@ -3243,7 +3269,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set # CONFIG_SENSORS_PT5161L is not set -# CONFIG_SENSORS_SBTSI is not set # CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SHT3x is not set @@ -3843,6 +3868,8 @@ CONFIG_VIDEO_CAMERA_SENSOR=y # CONFIG_VIDEO_IMX355 is not set # CONFIG_VIDEO_IMX412 is not set # CONFIG_VIDEO_IMX415 is not set +# CONFIG_VIDEO_IMX471 is not set +# CONFIG_VIDEO_IMX678 is not set CONFIG_VIDEO_IMX896=m # CONFIG_VIDEO_MT9M001 is not set # CONFIG_VIDEO_MT9M111 is not set @@ -4401,6 +4428,7 @@ CONFIG_DRM_PANEL=y # Display Panels # # CONFIG_DRM_PANEL_ABT_Y030XX067A is not set +# CONFIG_DRM_PANEL_ANBERNIC_TD4310 is not set # CONFIG_DRM_PANEL_ARM_VERSATILE is not set # CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set # CONFIG_DRM_PANEL_AUO_A030JTN01 is not set @@ -4410,6 +4438,7 @@ CONFIG_DRM_PANEL=y # CONFIG_DRM_PANEL_BOE_TH101MB31UIG002_28A is not set # CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set # CONFIG_DRM_PANEL_BOE_TV101WUM_LL2 is not set +# CONFIG_DRM_PANEL_CHIPONE_ICNA35XX is not set # CONFIG_DRM_PANEL_CHIPWEALTH_CH13726A is not set # CONFIG_DRM_PANEL_EBBG_FT8719 is not set # CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set @@ -4425,8 +4454,10 @@ CONFIG_DRM_PANEL=y # CONFIG_DRM_PANEL_HIMAX_HX83121A is not set # CONFIG_DRM_PANEL_HIMAX_HX8394 is not set # CONFIG_DRM_PANEL_HYDIS_HV101HD1 is not set +# CONFIG_DRM_PANEL_ILITEK_ILI7807S is not set # CONFIG_DRM_PANEL_ILITEK_IL9322 is not set # CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set +# CONFIG_DRM_PANEL_ILITEK_ILI9488 is not set # CONFIG_DRM_PANEL_ILITEK_ILI9805 is not set # CONFIG_DRM_PANEL_ILITEK_ILI9806E_DSI is not set # CONFIG_DRM_PANEL_ILITEK_ILI9806E_SPI is not set @@ -4459,6 +4490,7 @@ CONFIG_DRM_PANEL=y # CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set # CONFIG_DRM_PANEL_NOVATEK_NT35950 is not set # CONFIG_DRM_PANEL_NOVATEK_NT36523 is not set +# CONFIG_DRM_PANEL_NOVATEK_NT36536 is not set # CONFIG_DRM_PANEL_NOVATEK_NT36672A is not set # CONFIG_DRM_PANEL_NOVATEK_NT36672E is not set # CONFIG_DRM_PANEL_NOVATEK_NT37700F is not set @@ -4477,6 +4509,7 @@ CONFIG_DRM_PANEL_NOVATEK_NT37705=m # CONFIG_DRM_PANEL_RAYDIUM_RM692E5 is not set # CONFIG_DRM_PANEL_RAYDIUM_RM69380 is not set # CONFIG_DRM_PANEL_RENESAS_R61307 is not set +# CONFIG_DRM_PANEL_RENESAS_R63419 is not set # CONFIG_DRM_PANEL_RENESAS_R69328 is not set # CONFIG_DRM_PANEL_RONBO_RB070D30 is not set # CONFIG_DRM_PANEL_SAMSUNG_AMS581VF01 is not set @@ -4615,6 +4648,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_KTD253 is not set # CONFIG_BACKLIGHT_KTD2801 is not set # CONFIG_BACKLIGHT_KTZ8866 is not set +# CONFIG_BACKLIGHT_SY7758 is not set # CONFIG_BACKLIGHT_MAX25014 is not set CONFIG_BACKLIGHT_QCOM_WLED=y # CONFIG_BACKLIGHT_ADP8860 is not set @@ -4902,6 +4936,8 @@ CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_SND_SOC_ADAU1701 is not set # CONFIG_SND_SOC_ADAU1761_I2C is not set # CONFIG_SND_SOC_ADAU1761_SPI is not set +# CONFIG_SND_SOC_ADAU1977_SPI is not set +# CONFIG_SND_SOC_ADAU1977_I2C is not set # CONFIG_SND_SOC_ADAU7002 is not set # CONFIG_SND_SOC_ADAU7118_HW is not set # CONFIG_SND_SOC_ADAU7118_I2C is not set @@ -5025,6 +5061,7 @@ CONFIG_SND_SOC_HDMI_CODEC=y # CONFIG_SND_SOC_RT5640 is not set # CONFIG_SND_SOC_RT5645 is not set # CONFIG_SND_SOC_RT5659 is not set +# CONFIG_SND_SOC_RT5677 is not set # CONFIG_SND_SOC_RT5682_SDW is not set # CONFIG_SND_SOC_RT700_SDW is not set # CONFIG_SND_SOC_RT711_SDW is not set @@ -5124,6 +5161,7 @@ CONFIG_SND_SOC_WCD9378_SDW=m # CONFIG_SND_SOC_WSA881X is not set # CONFIG_SND_SOC_WSA883X is not set # CONFIG_SND_SOC_WSA884X is not set +# CONFIG_SND_SOC_WSA885X is not set # CONFIG_SND_SOC_ZL38060 is not set # CONFIG_SND_SOC_MAX9759 is not set # CONFIG_SND_SOC_MT6351 is not set @@ -5203,11 +5241,13 @@ CONFIG_HID_GFRM=m CONFIG_HID_GLORIOUS=m CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF=y +# CONFIG_HID_HYPERX is not set CONFIG_HID_VIVALDI_COMMON=m CONFIG_HID_GOODIX_SPI=m CONFIG_HID_GOOGLE_STADIA_FF=m CONFIG_HID_VIVALDI=m CONFIG_HID_GT683R=m +# CONFIG_HID_MSI is not set CONFIG_HID_KEYTOUCH=m CONFIG_HID_KYE=m # CONFIG_HID_KYSONA is not set @@ -5313,6 +5353,7 @@ CONFIG_HID_MCP2221=m # # HID-BPF support # +# CONFIG_HID_BPF is not set # end of HID-BPF support CONFIG_I2C_HID=y @@ -5732,6 +5773,7 @@ CONFIG_LEDS_CLASS_MULTICOLOR=m # CONFIG_LEDS_SPI_BYTE is not set # CONFIG_LEDS_LM3697 is not set # CONFIG_LEDS_ST1202 is not set +# CONFIG_LEDS_LTC3220 is not set # # Flash and Torch LED drivers @@ -6031,13 +6073,21 @@ CONFIG_COMMON_CLK=y # CONFIG_COMMON_CLK_VC5 is not set # CONFIG_COMMON_CLK_VC7 is not set # CONFIG_COMMON_CLK_FIXED_MMIO is not set + +# +# Cixtech Audio Subsystem Clock Driver +# +# end of Cixtech Audio Subsystem Clock Driver + CONFIG_QCOM_GDSC=y CONFIG_COMMON_CLK_QCOM=y # CONFIG_CLK_ELIZA_DISPCC is not set # CONFIG_CLK_ELIZA_GCC is not set # CONFIG_CLK_ELIZA_TCSRCC is not set +CONFIG_CLK_GLYMUR_CAMCC=m # CONFIG_CLK_GLYMUR_DISPCC is not set -# CONFIG_CLK_GLYMUR_GCC is not set +CONFIG_CLK_GLYMUR_EVACC=m +CONFIG_CLK_GLYMUR_GCC=m # CONFIG_CLK_GLYMUR_GPUCC is not set # CONFIG_CLK_GLYMUR_TCSRCC is not set # CONFIG_CLK_GLYMUR_VIDEOCC is not set @@ -6047,7 +6097,12 @@ CONFIG_COMMON_CLK_QCOM=y # CONFIG_CLK_KAANAPALI_GPUCC is not set # CONFIG_CLK_KAANAPALI_TCSRCC is not set # CONFIG_CLK_KAANAPALI_VIDEOCC is not set -# CONFIG_CLK_NORD_GCC is not set +CONFIG_CLK_NORD_DISPCC=m +CONFIG_CLK_MAILI_VIDEOCC=m +CONFIG_CLK_NORD_GCC=m +CONFIG_CLK_SHIKRA_AUDIOCORECC=m +CONFIG_CLK_SHIKRA_GCC=y +CONFIG_CLK_NORD_GPUCC=m # CONFIG_CLK_X1E80100_CAMCC is not set # CONFIG_CLK_X1E80100_DISPCC is not set # CONFIG_CLK_X1E80100_GCC is not set @@ -6058,15 +6113,14 @@ CONFIG_COMMON_CLK_QCOM=y # CONFIG_CLK_X1P42100_VIDEOCC is not set # CONFIG_CLK_QCM2290_GPUCC is not set # CONFIG_QCOM_A53PLL is not set -# CONFIG_QCOM_A7PLL is not set # CONFIG_QCOM_CLK_APCC_MSM8996 is not set CONFIG_QCOM_CLK_RPMH=y -# CONFIG_CLK_HAWI_GCC is not set +CONFIG_CLK_HAWI_GCC=m # CONFIG_CLK_HAWI_TCSRCC is not set +CONFIG_CLK_HAWI_VIDEOCC=m # CONFIG_IPQ_APSS_PLL is not set # CONFIG_IPQ_APSS_5424 is not set # CONFIG_IPQ_CMN_PLL is not set -# CONFIG_IPQ_GCC_4019 is not set # CONFIG_IPQ_GCC_5018 is not set # CONFIG_IPQ_GCC_5210 is not set # CONFIG_IPQ_GCC_5332 is not set @@ -6261,6 +6315,7 @@ CONFIG_QCOM_IOMMU=y # CONFIG_REMOTEPROC=y # CONFIG_REMOTEPROC_CDEV is not set +# CONFIG_AMD_MBV_BRAM_REMOTEPROC is not set CONFIG_QCOM_PIL_INFO=m CONFIG_QCOM_RPROC_COMMON=m CONFIG_QCOM_Q6V5_COMMON=m @@ -6331,23 +6386,15 @@ CONFIG_SOUNDWIRE_QCOM=y # end of Enable LiteX SoC Builder specific drivers # CONFIG_WPCM450_SOC is not set - -# -# Qualcomm SoC drivers -# +CONFIG_QCOM_SOC=y CONFIG_QCOM_AOSS_QMP=y CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GENI_SE=y -# CONFIG_QCOM_GSBI is not set CONFIG_QCOM_LLCC=y -CONFIG_QCOM_MDT_LOADER=y # CONFIG_QCOM_OCMEM is not set CONFIG_QCOM_PD_MAPPER=y -CONFIG_QCOM_PDR_HELPERS=y -CONFIG_QCOM_PDR_MSG=y # CONFIG_QCOM_PMIC_PDCHARGER_ULOG is not set CONFIG_QCOM_PMIC_GLINK=y -CONFIG_QCOM_QMI_HELPERS=y # CONFIG_QCOM_RAMP_CTRL is not set CONFIG_QCOM_RMTFS_MEM=y # CONFIG_QCOM_RPM_MASTER_STATS is not set @@ -6363,10 +6410,12 @@ CONFIG_QCOM_STATS=y # CONFIG_QCOM_WCNSS_CTRL is not set CONFIG_QCOM_APR=y CONFIG_QCOM_ICC_BWMON=y -CONFIG_QCOM_INLINE_CRYPTO_ENGINE=y # CONFIG_QCOM_PBS is not set -# end of Qualcomm SoC drivers - +CONFIG_QCOM_INLINE_CRYPTO_ENGINE=y +CONFIG_QCOM_MDT_LOADER=y +CONFIG_QCOM_PDR_HELPERS=y +CONFIG_QCOM_PDR_MSG=y +CONFIG_QCOM_QMI_HELPERS=y CONFIG_QCOM_UBWC_CONFIG=y # CONFIG_SOC_TI is not set @@ -6593,6 +6642,7 @@ CONFIG_QCOM_SPMI_ADC5=y # CONFIG_TI_ADS1018 is not set # CONFIG_TI_ADS1100 is not set # CONFIG_TI_ADS1119 is not set +# CONFIG_TI_ADS112C14 is not set # CONFIG_TI_ADS124S08 is not set # CONFIG_TI_ADS1298 is not set # CONFIG_TI_ADS131E08 is not set @@ -6605,6 +6655,7 @@ CONFIG_QCOM_SPMI_ADC5=y # CONFIG_TI_LMP92064 is not set # CONFIG_TI_TLC4541 is not set # CONFIG_TI_TSC2046 is not set +# CONFIG_VERSAL_SYSMON_I2C is not set # CONFIG_VF610_ADC is not set # CONFIG_XILINX_XADC is not set # end of Analog to digital converters @@ -6728,6 +6779,7 @@ CONFIG_IIO_INV_SENSORS_TIMESTAMP=m # CONFIG_MAX5821 is not set # CONFIG_MCP4725 is not set # CONFIG_MCP4728 is not set +# CONFIG_MCP47A1 is not set # CONFIG_MCP47FEB02 is not set # CONFIG_MCP4821 is not set # CONFIG_MCP4922 is not set @@ -6749,6 +6801,12 @@ CONFIG_IIO_INV_SENSORS_TIMESTAMP=m # CONFIG_ADMV8818 is not set # end of Filters +# +# Flow sensors +# +# CONFIG_SENSIRION_SLF3S is not set +# end of Flow sensors + # # Frequency Synthesizers DDS/PLL # @@ -6762,6 +6820,7 @@ CONFIG_IIO_INV_SENSORS_TIMESTAMP=m # # Phase-Locked Loop (PLL) frequency synthesizers # +# CONFIG_ADF41513 is not set # CONFIG_ADF4350 is not set # CONFIG_ADF4371 is not set # CONFIG_ADF4377 is not set @@ -6842,6 +6901,8 @@ CONFIG_HID_SENSOR_HUMIDITY=m CONFIG_INV_ICM42600=m # CONFIG_INV_ICM42600_I2C is not set CONFIG_INV_ICM42600_SPI=m +# CONFIG_INV_ICM42607_I2C is not set +# CONFIG_INV_ICM42607_SPI is not set # CONFIG_INV_ICM45600_I2C is not set # CONFIG_INV_ICM45600_SPI is not set # CONFIG_INV_MPU6050_I2C is not set @@ -6939,6 +7000,7 @@ CONFIG_HID_SENSOR_MAGNETOMETER_3D=m # CONFIG_MMC5983 is not set # CONFIG_IIO_ST_MAGN_3AXIS is not set # CONFIG_INFINEON_TLV493D is not set +# CONFIG_QMC5883L is not set CONFIG_QMC6308=m # CONFIG_SENSORS_HMC5843_I2C is not set # CONFIG_SENSORS_HMC5843_SPI is not set @@ -7206,6 +7268,11 @@ CONFIG_NVMEM_LAYOUTS=y # CONFIG_NVMEM_LAYOUT_U_BOOT_ENV is not set # end of Layout Types +CONFIG_EEPROM_AT24=m +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_EEPROM_EE1004 is not set +# CONFIG_EEPROM_M24LR is not set CONFIG_NVMEM_QCOM_QFPROM=y # CONFIG_NVMEM_QCOM_SEC_QFPROM is not set # CONFIG_NVMEM_RMEM is not set @@ -7237,6 +7304,7 @@ CONFIG_INTERCONNECT_QCOM_BCM_VOTER=y # CONFIG_INTERCONNECT_QCOM_GLYMUR is not set # CONFIG_INTERCONNECT_QCOM_HAWI is not set # CONFIG_INTERCONNECT_QCOM_KAANAPALI is not set +CONFIG_INTERCONNECT_QCOM_MAILI=y # CONFIG_INTERCONNECT_QCOM_NORD is not set CONFIG_INTERCONNECT_QCOM_OSM_L3=y # CONFIG_INTERCONNECT_QCOM_QCS615 is not set @@ -7361,7 +7429,6 @@ CONFIG_FSCACHE=y CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_ERROR_INJECTION is not set -# CONFIG_CACHEFILES_ONDEMAND is not set # end of Caches # @@ -7395,7 +7462,7 @@ CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_VMCORE=y # CONFIG_PROC_VMCORE_DEVICE_DUMP is not set -CONFIG_PROC_SYSCTL=y +CONFIG_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y @@ -7423,7 +7490,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set CONFIG_SQUASHFS=m CONFIG_SQUASHFS_FILE_CACHE=y @@ -7443,7 +7509,6 @@ CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -# CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set @@ -7842,16 +7907,6 @@ CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_ATMEL_ECC is not set # CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set # CONFIG_CRYPTO_DEV_CCP is not set -CONFIG_CRYPTO_DEV_QCE=y -CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y -CONFIG_CRYPTO_DEV_QCE_SHA=y -CONFIG_CRYPTO_DEV_QCE_AEAD=y -CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y -# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set -# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set -# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set -CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512 -CONFIG_CRYPTO_DEV_QCOM_RNG=y # CONFIG_CRYPTO_DEV_VIRTIO is not set # CONFIG_CRYPTO_DEV_SAFEXCEL is not set # CONFIG_CRYPTO_DEV_CCREE is not set @@ -7913,7 +7968,13 @@ CONFIG_CRYPTO_HASH_INFO=y CONFIG_CRYPTO_LIB_UTILS=y CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_LIB_AES_ARCH=y +CONFIG_CRYPTO_LIB_AES_CBC=y CONFIG_CRYPTO_LIB_AES_CBC_MACS=y +CONFIG_CRYPTO_LIB_AES_CCM=y +CONFIG_CRYPTO_LIB_AES_CTR=y +CONFIG_CRYPTO_LIB_AES_ECB=y +CONFIG_CRYPTO_LIB_AES_GCM=y +CONFIG_CRYPTO_LIB_AES_XTS=y CONFIG_CRYPTO_LIB_ARC4=m CONFIG_CRYPTO_LIB_GF128MUL=y CONFIG_CRYPTO_LIB_BLAKE2B=y @@ -7921,7 +7982,7 @@ CONFIG_CRYPTO_LIB_CHACHA=m CONFIG_CRYPTO_LIB_CHACHA_ARCH=y CONFIG_CRYPTO_LIB_CURVE25519=m CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y -CONFIG_CRYPTO_LIB_DES=y +CONFIG_CRYPTO_LIB_DES=m CONFIG_CRYPTO_LIB_GF128HASH=y CONFIG_CRYPTO_LIB_GF128HASH_ARCH=y CONFIG_CRYPTO_LIB_MD5=y @@ -7944,7 +8005,6 @@ CONFIG_RAID6_PQ_ARCH=y CONFIG_RAID6_PQ_BENCHMARK=y CONFIG_XXHASH=y CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y -# CONFIG_RANDOM32_SELFTEST is not set CONFIG_842_COMPRESS=y CONFIG_842_DECOMPRESS=y CONFIG_ZLIB_INFLATE=y @@ -7993,6 +8053,7 @@ CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y CONFIG_ARCH_HAS_BATCHED_DMA_SYNC=y CONFIG_SWIOTLB=y +CONFIG_SWIOTLB_DEFAULT_SIZE_MB=64 # CONFIG_SWIOTLB_DYNAMIC is not set CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC=y CONFIG_DMA_NEED_SYNC=y @@ -8016,7 +8077,7 @@ CONFIG_DIMLIB=y CONFIG_LIBFDT=y CONFIG_OID_REGISTRY=y CONFIG_UCS2_STRING=y -CONFIG_HAVE_GENERIC_VDSO=y +CONFIG_VDSO_DATASTORE=y CONFIG_GENERIC_GETTIMEOFDAY=y CONFIG_VDSO_GETRANDOM=y CONFIG_FONT_SUPPORT=y @@ -8084,7 +8145,7 @@ CONFIG_FRAME_WARN=2048 CONFIG_SECTION_MISMATCH_WARN_ONLY=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_WARN_CONTEXT_ANALYSIS=y # end of Compile-time checks and compiler options # @@ -8129,6 +8190,7 @@ CONFIG_ARCH_HAS_PTDUMP=y CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_PER_VMA_LOCK_STATS is not set +# CONFIG_MEM_ALLOC_PROFILING is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SHRINKER_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -8141,7 +8203,6 @@ CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y # CONFIG_DEBUG_VIRTUAL is not set CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_PER_CPU_MAPS is not set -# CONFIG_MEM_ALLOC_PROFILING is not set CONFIG_HAVE_ARCH_KASAN=y CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y CONFIG_HAVE_ARCH_KASAN_HW_TAGS=y @@ -8237,6 +8298,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FREGS=y CONFIG_HAVE_FTRACE_GRAPH_FUNC=y CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y CONFIG_HAVE_EXTRA_IPI_TRACEPOINTS=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y @@ -8258,6 +8320,7 @@ CONFIG_FUNCTION_GRAPH_TRACER=y # CONFIG_FUNCTION_GRAPH_RETVAL is not set # CONFIG_FUNCTION_GRAPH_RETADDR is not set CONFIG_DYNAMIC_FTRACE=y +CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y # CONFIG_FUNCTION_SELF_TRACING is not set # CONFIG_FPROBE is not set @@ -8275,6 +8338,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_PROBE_EVENTS_DUMP_FETCHARG is not set CONFIG_KPROBE_EVENTS=y # CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set CONFIG_UPROBE_EVENTS=y @@ -8348,6 +8412,7 @@ CONFIG_RUNTIME_TESTING_MENU=y # CONFIG_TEST_WORKQUEUE is not set # CONFIG_TEST_BPF is not set # CONFIG_FIND_BIT_BENCHMARK is not set +# CONFIG_REGION_ALLOC_BENCHMARK is not set # CONFIG_TEST_FIRMWARE is not set # CONFIG_TEST_SYSCTL is not set # CONFIG_TEST_UDELAY is not set