SectionVerb {
	Value {
		TQ "HiFi"
	}
	EnableSequence [
		cset "name='SEN_MI2S_RX Audio Mixer MultiMedia1' 1"
		cset "name='MultiMedia2 Mixer TX_CODEC_DMA_TX_3' 1"
	]
}

SectionDevice."Speaker" {
	Comment "Internal stereo speakers (2x AW88261)"

	EnableSequence [
		cset "name='Amplifier L PCM Playback Volume' 352"
		cset "name='Amplifier R PCM Playback Volume' 352"
	]

	DisableSequence [
		cset "name='Amplifier L PCM Playback Volume' 0"
		cset "name='Amplifier R PCM Playback Volume' 0"
	]

	Value {
		PlaybackPriority 100
		PlaybackPCM "hw:${CardId},0"
	}
}

SectionDevice."Mic" {
	Comment "Handset microphone (AMIC1, bottom edge)"

	# WCD9378 ADC1 -> SoundWire -> TX macro DEC0 -> TX_CODEC_DMA_TX_3.
	# 'TX SMIC MUX0' takes the mux item name SWR_MIC0, not the
	# SWR_INPUT0 widget it routes from.
	#
	# The codec-side controls only exist when the stock wcd9378
	# driver owns the TX slave. With the SDCA-class prototype driver
	# (sdca-mobile branch) the codec bring-up happens in the kernel
	# on PDE power-up and the card exposes no codec controls; only
	# the TX macro half of the sequence applies then.
	If.codec {
		Condition {
			Type ControlExists
			Control "name='ADC1 MUX'"
		}
		True {
			EnableSequence [
				cset "name='ADC1 MUX' CH1_AMIC1"
				cset "name='ADC1 Switch' 1"
				cset "name='ADC1 Volume' 12"
				cset "name='TX0 MODE' ADC_NORMAL"
				cset "name='TX0 SEQUENCER Switch' 1"
				cset "name='TX SMIC MUX0' SWR_MIC0"
				cset "name='TX DEC0 MUX' SWR_MIC"
				cset "name='TX_DEC0 Volume' 84"
				cset "name='TX_AIF1_CAP Mixer DEC0' 1"
			]

			DisableSequence [
				cset "name='TX_AIF1_CAP Mixer DEC0' 0"
				cset "name='TX0 SEQUENCER Switch' 0"
				cset "name='ADC1 Switch' 0"
				cset "name='TX SMIC MUX0' ZERO"
			]
		}
		False {
			EnableSequence [
				cset "name='TX SMIC MUX0' SWR_MIC0"
				cset "name='TX DEC0 MUX' SWR_MIC"
				cset "name='TX_DEC0 Volume' 84"
				cset "name='TX_AIF1_CAP Mixer DEC0' 1"
			]

			DisableSequence [
				cset "name='TX_AIF1_CAP Mixer DEC0' 0"
				cset "name='TX SMIC MUX0' ZERO"
			]
		}
	}

	Value {
		CapturePriority 100
		CapturePCM "hw:${CardId},1"
	}
}