# AW88261 smart-amp config blob (proprietary, Awinic) - extracted from the
# stock vendor partition on-device instead of being shipped (fp6 repo
# journal/blobs/, 2026-08-24). Slot A first, slot B as fallback; the copy
# must hash-match the blob the audio stack was tested with.
file vendor_a,vendor_b firmware/aw882xx_acf.bin /usr/lib/firmware/qcom/milos/fairphone/fp6/aw88261_acf.bin af723973655ba5901948d4a22212323e39ce53ff0156021185720af4af6ab0b3
# Rebinds are the FALLBACK for a card that probed before extraction (the
# service normally runs pre-coldplug, so they no-op). The amps bind on i2c
# probe but request the ACF only at card init, never retried on failure; and
# when that failed card init already took the machine driver down (-2, not a
# defer), re-probing the amps alone cannot re-form the card - the platform
# device needs a fresh probe too. Note the recovered card plays back fine
# but its capture path is dead until the next boot (wcd9378 TX sequencer
# refuses PS0 on a late-formed card - journal/blobs/ 2026-08-29).
rebind i2c 6-0034
rebind i2c 6-0035
rebind platform sound