Jorijn van der Graaf
6e77823933
Userspace VoLTE/IMS daemon for mainline Linux phones (developed on the Fairphone 6): a GLib-free core (SIP, SDP, USIM AKA, IPsec SA setup, RTP media, call engine) behind a GDBus control daemon, a standalone AMR-WB media leg, and a Plasma Dialer backend. C++26 modules built with Crafter Build; the tree is clean under the project's house-style linter (crafter-build lint) across all three build products. Assisted-by: Claude:claude-fable-5 Signed-off-by: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>
106 lines
4.3 KiB
Bash
106 lines
4.3 KiB
Bash
#!/bin/sh
|
|
# SPDX-License-Identifier: GPL-3.0-only
|
|
# SPDX-FileCopyrightText: Copyright (C) 2026 Catcrafts®
|
|
# ims-pdn-up.sh — boot bring-up for the IPv6 `ims` PDN (journal/ims.md s45).
|
|
#
|
|
# Finds-or-creates the ims ipv6 bearer via ModemManager, connects it, and
|
|
# configures the muxed netdev with the MM-assigned address (the s34 recipe,
|
|
# automated). Idempotent — safe to run when the PDN is already up. Runs as
|
|
# ExecStartPre of imsd.service, so imsd only starts once the PDN exists; a
|
|
# nonzero exit fails the unit and systemd retries per Restart/RestartSec.
|
|
|
|
log() { echo "ims-pdn-up: $*"; }
|
|
|
|
kv() { mmcli "$@" -K 2>/dev/null; }
|
|
|
|
bearer_paths() {
|
|
kv -m "$MODEM" | sed -n 's/^modem\.generic\.bearers\.value\[[0-9]*\] *: *//p'
|
|
}
|
|
|
|
# ---- wait for a modem (MM + modem firmware take a while after boot)
|
|
n=0
|
|
while :; do
|
|
MODEM=$(mmcli -L 2>/dev/null | sed -n 's,.*/Modem/\([0-9]*\).*,\1,p' | head -n1)
|
|
[ -n "$MODEM" ] && break
|
|
n=$((n + 1))
|
|
[ "$n" -ge 60 ] && { log "no modem after 120 s"; exit 1; }
|
|
sleep 2
|
|
done
|
|
log "modem $MODEM"
|
|
|
|
# ---- find a connected ims bearer; else find-or-create one and connect it
|
|
# (LTE attach can lag boot, so connect attempts retry)
|
|
find_ims_bearer() { # $1 = required bearer.status.connected value
|
|
for B in $(bearer_paths); do
|
|
INFO=$(kv -b "$B") || continue
|
|
echo "$INFO" | grep -q '^bearer\.properties\.apn *: *ims$' || continue
|
|
echo "$INFO" | grep -q "^bearer\.status\.connected *: *$1\$" || continue
|
|
echo "$B"
|
|
return 0
|
|
done
|
|
return 1
|
|
}
|
|
|
|
BEARER=$(find_ims_bearer yes)
|
|
n=0
|
|
while [ -z "$BEARER" ]; do
|
|
n=$((n + 1))
|
|
[ "$n" -gt 10 ] && { log "bearer connect failed after 10 attempts"; exit 1; }
|
|
B=$(find_ims_bearer no) # reuse a stale disconnected ims bearer
|
|
if [ -z "$B" ]; then
|
|
B=$(mmcli -m "$MODEM" --create-bearer='apn=ims,ip-type=ipv6' 2>/dev/null |
|
|
sed -n 's,.*\(/org/freedesktop/ModemManager1/Bearer/[0-9]*\).*,\1,p')
|
|
[ -n "$B" ] && log "created bearer $B"
|
|
fi
|
|
if [ -n "$B" ] && mmcli -b "$B" --connect >/dev/null 2>&1; then
|
|
BEARER=$B
|
|
else
|
|
log "connect attempt $n failed; retrying in 10 s"
|
|
sleep 10
|
|
fi
|
|
done
|
|
log "connected: $BEARER"
|
|
|
|
# ---- configure the muxed netdev with the MM-assigned address
|
|
INFO=$(kv -b "$BEARER")
|
|
IFACE=$(echo "$INFO" | sed -n 's/^bearer\.status\.interface *: *//p')
|
|
ADDR=$(echo "$INFO" | sed -n 's/^bearer\.ipv6-config\.address *: *//p')
|
|
PREFIX=$(echo "$INFO" | sed -n 's/^bearer\.ipv6-config\.prefix *: *//p')
|
|
if [ -z "$IFACE" ] || [ -z "$ADDR" ]; then
|
|
log "bearer up but no interface/address in mmcli output"
|
|
exit 1
|
|
fi
|
|
ip link set "$IFACE" up || exit 1
|
|
ip -6 addr replace "$ADDR/${PREFIX:-64}" dev "$IFACE" || exit 1
|
|
|
|
# wait out IPv6 DAD: binding a tentative address gives EADDRNOTAVAIL
|
|
# (first boot attempt cost a 120 s systemd retry exactly this way)
|
|
n=0
|
|
while ip -6 addr show dev "$IFACE" | grep -q tentative; do
|
|
n=$((n + 1))
|
|
[ "$n" -ge 10 ] && { log "address still tentative after 10 s"; break; }
|
|
sleep 1
|
|
done
|
|
log "$IFACE up, $ADDR/${PREFIX:-64}"
|
|
|
|
# ---- hand the connected ims netdev to imsd (imsd.service reads
|
|
# /run/imsd.env) so the daemon carries no baked-in interface name
|
|
echo "DEV=$IFACE" > /run/imsd.env
|
|
|
|
# ---- open the IMS protected ports in the firewall (rung 5b root cause,
|
|
# journal/ims.md s56): pmOS's default nftables INPUT chain is policy-drop and
|
|
# explicitly drops all inbound on qmapmux*, which silently killed every
|
|
# network-initiated request (reg-event NOTIFY, MT INVITE) after ESP decap —
|
|
# the P-CSCF's TCP SYNs to the protected server port never reached the
|
|
# listener, so terminating delivery failed and MT calls fell back to CS.
|
|
# 45061/45062 = imsd's protected client/server ports (kPortUc/kPortUs).
|
|
# Best-effort: never fail the unit over a missing/foreign firewall.
|
|
if nft list table inet filter >/dev/null 2>&1; then
|
|
if ! nft list chain inet filter input | grep -q imsd-protected-ports; then
|
|
nft insert rule inet filter input iifname "qmapmux*" tcp dport 45061-45062 accept comment '"imsd-protected-ports"' &&
|
|
nft insert rule inet filter input iifname "qmapmux*" udp dport 45061-45062 accept comment '"imsd-protected-ports"' &&
|
|
log "nftables: opened protected ports 45061-45062 on qmapmux*" ||
|
|
log "nftables: rule insert failed (continuing)"
|
|
fi
|
|
fi
|
|
exit 0
|