staging: sm750fb: remove ddk750_hwi2c
With the removal of ddk750_sii164.c, the functions in ddk750_hwi2c are now also unused. This patch removes them and the files they are in. Signed-off-by: Ruben Wauters <rubenru09@aol.com> Link: https://lore.kernel.org/r/20250418151755.42624-4-rubenru09@aol.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ruben Wauters
Greg Kroah-Hartman
parent
911ab08c0c
commit
8d2edd726e
4 changed files with 1 additions and 263 deletions
|
|
@ -3,4 +3,4 @@ obj-$(CONFIG_FB_SM750) += sm750fb.o
|
|||
|
||||
sm750fb-objs := sm750.o sm750_hw.o sm750_accel.o sm750_cursor.o \
|
||||
ddk750_chip.o ddk750_power.o ddk750_mode.o \
|
||||
ddk750_display.o ddk750_swi2c.o ddk750_hwi2c.o
|
||||
ddk750_display.o ddk750_swi2c.o
|
||||
|
|
|
|||
|
|
@ -14,8 +14,5 @@
|
|||
#include "ddk750_chip.h"
|
||||
#include "ddk750_display.h"
|
||||
#include "ddk750_power.h"
|
||||
#ifdef USE_HW_I2C
|
||||
#include "ddk750_hwi2c.h"
|
||||
#endif
|
||||
#include "ddk750_swi2c.h"
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,247 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
#define USE_HW_I2C
|
||||
#ifdef USE_HW_I2C
|
||||
#include "ddk750_chip.h"
|
||||
#include "ddk750_reg.h"
|
||||
#include "ddk750_hwi2c.h"
|
||||
#include "ddk750_power.h"
|
||||
|
||||
#define MAX_HWI2C_FIFO 16
|
||||
#define HWI2C_WAIT_TIMEOUT 0xF0000
|
||||
|
||||
int sm750_hw_i2c_init(unsigned char bus_speed_mode)
|
||||
{
|
||||
unsigned int value;
|
||||
|
||||
/* Enable GPIO 30 & 31 as IIC clock & data */
|
||||
value = peek32(GPIO_MUX);
|
||||
|
||||
value |= (GPIO_MUX_30 | GPIO_MUX_31);
|
||||
poke32(GPIO_MUX, value);
|
||||
|
||||
/*
|
||||
* Enable Hardware I2C power.
|
||||
* TODO: Check if we need to enable GPIO power?
|
||||
*/
|
||||
sm750_enable_i2c(1);
|
||||
|
||||
/* Enable the I2C Controller and set the bus speed mode */
|
||||
value = peek32(I2C_CTRL) & ~(I2C_CTRL_MODE | I2C_CTRL_EN);
|
||||
if (bus_speed_mode)
|
||||
value |= I2C_CTRL_MODE;
|
||||
value |= I2C_CTRL_EN;
|
||||
poke32(I2C_CTRL, value);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void sm750_hw_i2c_close(void)
|
||||
{
|
||||
unsigned int value;
|
||||
|
||||
/* Disable I2C controller */
|
||||
value = peek32(I2C_CTRL) & ~I2C_CTRL_EN;
|
||||
poke32(I2C_CTRL, value);
|
||||
|
||||
/* Disable I2C Power */
|
||||
sm750_enable_i2c(0);
|
||||
|
||||
/* Set GPIO 30 & 31 back as GPIO pins */
|
||||
value = peek32(GPIO_MUX);
|
||||
value &= ~GPIO_MUX_30;
|
||||
value &= ~GPIO_MUX_31;
|
||||
poke32(GPIO_MUX, value);
|
||||
}
|
||||
|
||||
static long hw_i2c_wait_tx_done(void)
|
||||
{
|
||||
unsigned int timeout;
|
||||
|
||||
/* Wait until the transfer is completed. */
|
||||
timeout = HWI2C_WAIT_TIMEOUT;
|
||||
while (!(peek32(I2C_STATUS) & I2C_STATUS_TX) && (timeout != 0))
|
||||
timeout--;
|
||||
|
||||
if (timeout == 0)
|
||||
return -1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* This function writes data to the i2c slave device registers.
|
||||
*
|
||||
* Parameters:
|
||||
* addr - i2c Slave device address
|
||||
* length - Total number of bytes to be written to the device
|
||||
* buf - The buffer that contains the data to be written to the
|
||||
* i2c device.
|
||||
*
|
||||
* Return Value:
|
||||
* Total number of bytes those are actually written.
|
||||
*/
|
||||
static unsigned int hw_i2c_write_data(unsigned char addr,
|
||||
unsigned int length,
|
||||
unsigned char *buf)
|
||||
{
|
||||
unsigned char count, i;
|
||||
unsigned int total_bytes = 0;
|
||||
|
||||
/* Set the Device Address */
|
||||
poke32(I2C_SLAVE_ADDRESS, addr & ~0x01);
|
||||
|
||||
/*
|
||||
* Write data.
|
||||
* Note:
|
||||
* Only 16 byte can be accessed per i2c start instruction.
|
||||
*/
|
||||
do {
|
||||
/*
|
||||
* Reset I2C by writing 0 to I2C_RESET register to
|
||||
* clear the previous status.
|
||||
*/
|
||||
poke32(I2C_RESET, 0);
|
||||
|
||||
/* Set the number of bytes to be written */
|
||||
if (length < MAX_HWI2C_FIFO)
|
||||
count = length - 1;
|
||||
else
|
||||
count = MAX_HWI2C_FIFO - 1;
|
||||
poke32(I2C_BYTE_COUNT, count);
|
||||
|
||||
/* Move the data to the I2C data register */
|
||||
for (i = 0; i <= count; i++)
|
||||
poke32(I2C_DATA0 + i, *buf++);
|
||||
|
||||
/* Start the I2C */
|
||||
poke32(I2C_CTRL, peek32(I2C_CTRL) | I2C_CTRL_CTRL);
|
||||
|
||||
/* Wait until the transfer is completed. */
|
||||
if (hw_i2c_wait_tx_done() != 0)
|
||||
break;
|
||||
|
||||
/* Subtract length */
|
||||
length -= (count + 1);
|
||||
|
||||
/* Total byte written */
|
||||
total_bytes += (count + 1);
|
||||
|
||||
} while (length > 0);
|
||||
|
||||
return total_bytes;
|
||||
}
|
||||
|
||||
/*
|
||||
* This function reads data from the slave device and stores them
|
||||
* in the given buffer
|
||||
*
|
||||
* Parameters:
|
||||
* addr - i2c Slave device address
|
||||
* length - Total number of bytes to be read
|
||||
* buf - Pointer to a buffer to be filled with the data read
|
||||
* from the slave device. It has to be the same size as the
|
||||
* length to make sure that it can keep all the data read.
|
||||
*
|
||||
* Return Value:
|
||||
* Total number of actual bytes read from the slave device
|
||||
*/
|
||||
static unsigned int hw_i2c_read_data(unsigned char addr,
|
||||
unsigned int length,
|
||||
unsigned char *buf)
|
||||
{
|
||||
unsigned char count, i;
|
||||
unsigned int total_bytes = 0;
|
||||
|
||||
/* Set the Device Address */
|
||||
poke32(I2C_SLAVE_ADDRESS, addr | 0x01);
|
||||
|
||||
/*
|
||||
* Read data and save them to the buffer.
|
||||
* Note:
|
||||
* Only 16 byte can be accessed per i2c start instruction.
|
||||
*/
|
||||
do {
|
||||
/*
|
||||
* Reset I2C by writing 0 to I2C_RESET register to
|
||||
* clear all the status.
|
||||
*/
|
||||
poke32(I2C_RESET, 0);
|
||||
|
||||
/* Set the number of bytes to be read */
|
||||
if (length <= MAX_HWI2C_FIFO)
|
||||
count = length - 1;
|
||||
else
|
||||
count = MAX_HWI2C_FIFO - 1;
|
||||
poke32(I2C_BYTE_COUNT, count);
|
||||
|
||||
/* Start the I2C */
|
||||
poke32(I2C_CTRL, peek32(I2C_CTRL) | I2C_CTRL_CTRL);
|
||||
|
||||
/* Wait until transaction done. */
|
||||
if (hw_i2c_wait_tx_done() != 0)
|
||||
break;
|
||||
|
||||
/* Save the data to the given buffer */
|
||||
for (i = 0; i <= count; i++)
|
||||
*buf++ = peek32(I2C_DATA0 + i);
|
||||
|
||||
/* Subtract length by 16 */
|
||||
length -= (count + 1);
|
||||
|
||||
/* Number of bytes read. */
|
||||
total_bytes += (count + 1);
|
||||
|
||||
} while (length > 0);
|
||||
|
||||
return total_bytes;
|
||||
}
|
||||
|
||||
/*
|
||||
* This function reads the slave device's register
|
||||
*
|
||||
* Parameters:
|
||||
* deviceAddress - i2c Slave device address which register
|
||||
* to be read from
|
||||
* registerIndex - Slave device's register to be read
|
||||
*
|
||||
* Return Value:
|
||||
* Register value
|
||||
*/
|
||||
unsigned char sm750_hw_i2c_read_reg(unsigned char addr, unsigned char reg)
|
||||
{
|
||||
unsigned char value = 0xFF;
|
||||
|
||||
if (hw_i2c_write_data(addr, 1, ®) == 1)
|
||||
hw_i2c_read_data(addr, 1, &value);
|
||||
|
||||
return value;
|
||||
}
|
||||
|
||||
/*
|
||||
* This function writes a value to the slave device's register
|
||||
*
|
||||
* Parameters:
|
||||
* deviceAddress - i2c Slave device address which register
|
||||
* to be written
|
||||
* registerIndex - Slave device's register to be written
|
||||
* data - Data to be written to the register
|
||||
*
|
||||
* Result:
|
||||
* 0 - Success
|
||||
* -1 - Fail
|
||||
*/
|
||||
int sm750_hw_i2c_write_reg(unsigned char addr,
|
||||
unsigned char reg,
|
||||
unsigned char data)
|
||||
{
|
||||
unsigned char value[2];
|
||||
|
||||
value[0] = reg;
|
||||
value[1] = data;
|
||||
if (hw_i2c_write_data(addr, 2, value) == 2)
|
||||
return 0;
|
||||
|
||||
return -1;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -1,12 +0,0 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
#ifndef DDK750_HWI2C_H__
|
||||
#define DDK750_HWI2C_H__
|
||||
|
||||
/* hwi2c functions */
|
||||
int sm750_hw_i2c_init(unsigned char bus_speed_mode);
|
||||
void sm750_hw_i2c_close(void);
|
||||
|
||||
unsigned char sm750_hw_i2c_read_reg(unsigned char addr, unsigned char reg);
|
||||
int sm750_hw_i2c_write_reg(unsigned char addr, unsigned char reg,
|
||||
unsigned char data);
|
||||
#endif
|
||||
Loading…
Add table
Add a link
Reference in a new issue