aports: extract vendor blobs before udev coldplug so first-boot audio fully works

The preset fix (6ecc1dc) makes the unit run, but multi-user is too late: the
sound card probes at ~21 s, hard-fails (-2, no retry) on the missing ACF, and
the extractor's amp rebind at ~60 s cannot re-form a card whose machine
driver already failed. Re-probing the machine driver does re-form it, but a
late-formed card has a dead capture path - the wcd9378 TX sequencer refuses
PS0 (act_ps 0x3) until the next boot. So rebinding after the fact can never
fully win; extraction has to happen before the drivers probe.

- fp6-vendor-blobs.service: DefaultDependencies=no, run after remount-fs and
  before systemd-udev-trigger, so blobs exist before module coldplug.
  multi-user stays a second Wants as a post-udev retry if the early run
  failed (by-partlabel/make-dynpart-mappings fallbacks need udev).
- aw88261-acf.manifest: add 'rebind platform sound' so the fallback path at
  least recovers playback the same boot (capture then heals on reboot).
- fp6-vendor-blobs.post-upgrade (pkgrel 1): systemctl preset + immediate
  extract, so installs of the 2026-08-24 image (unit shipped disabled, no
  version bump to deliver the preset) finally heal via plain apk upgrade.
- soc-fairphone-fp6-audio pkgrel 1: carries the manifest change.

Verified on the dev phone with the exact staged bytes (sha256-compared):
simulated fresh install (ACF removed, reboot) extracts at 13.3 s, coldplug
probes the amps at 15.1 s, card init at 20.9 s loads the ACF cleanly, and a
1 kHz speaker-to-mic loopback passes on that same first boot with zero TX
sequencer warnings; next boot takes the all-dests-present fast path in 25 ms.
Evidence: fp6 repo journal/blobs/, 2026-08-29.

Assisted-by: Claude:claude-fable-5

aports/device/soc-fairphone-fp6-audio/APKBUILD

@@ -11,7 +11,7 @@
 maintainer="Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>"
 pkgname=soc-fairphone-fp6-audio
 pkgver=4
-pkgrel=0
+pkgrel=1
 pkgdesc="Fairphone 6 audio topology and UCM profile"
 url="https://forgejo.catcrafts.net/Catcrafts/audioreach-topology"
 arch="noarch"
@@ -47,7 +47,7 @@ package() {
 
 sha512sums="
 51071c574b9f5899c78ba9fe1b6f3bbda2195e6d274014a05869ae56ed0ff18e15678bd7d78cd68846900d3c579556328e229842152cffd943186d43344ed33c  fp6-tplg.bin
-bdfe413494b6815cf96843d83c6c9e8deb757b083d7577c93eab460de49d1cd00b8615c115c25d71f6488de4e65f04d5f02bca816b2c31747880a22613e547a3  aw88261-acf.manifest
+0240a36e6fae76f6df576c5ffc93241f6d59e03db429811d61c746561743ddb4690cb925028546a6c3d69dcc867aead5ddf1c85b12a0065195ea9c6621fa847f  aw88261-acf.manifest
 3bb268f9fcb8d1c0b42741b67da42b6361bab259e7211d9930919995ebe7dcf67826e6d4f00ff5e4fe5b52067fe90d00212158c3b4879d1bee481e87f0623206  ucm-milos-fp6.conf
 2a189c3141fedc43f8eb19f4df1e43487223d524e27da3f948556d224cca1f493f6815ada191953fb79a19d5c5abadb21de7b3ece7b74b0929338c216e21e84a  HiFi.conf
 ec63fa5363738a43c9eee4b1be70201e2d2076ec817031fda087e61d781e81dc67351be44faf8b056a2939875a139cd909f7c311115bb1150e17ad4493846606  50-echo-cancel.conf

aports/device/soc-fairphone-fp6-audio/aw88261-acf.manifest

@@ -3,8 +3,14 @@
 # journal/blobs/, 2026-08-24). Slot A first, slot B as fallback; the copy
 # must hash-match the blob the audio stack was tested with.
 file vendor_a,vendor_b firmware/aw882xx_acf.bin /usr/lib/firmware/qcom/milos/fairphone/fp6/aw88261_acf.bin af723973655ba5901948d4a22212323e39ce53ff0156021185720af4af6ab0b3
-# the amps bind on i2c probe but request the ACF only at card init, which
-# races the extractor on first boot and is never retried on failure - a
-# forced fresh probe of both amps makes audio work that same boot either way
+# Rebinds are the FALLBACK for a card that probed before extraction (the
+# service normally runs pre-coldplug, so they no-op). The amps bind on i2c
+# probe but request the ACF only at card init, never retried on failure; and
+# when that failed card init already took the machine driver down (-2, not a
+# defer), re-probing the amps alone cannot re-form the card - the platform
+# device needs a fresh probe too. Note the recovered card plays back fine
+# but its capture path is dead until the next boot (wcd9378 TX sequencer
+# refuses PS0 on a late-formed card - journal/blobs/ 2026-08-29).
 rebind i2c 6-0034
 rebind i2c 6-0035
+rebind platform sound