.forgejo/workflows/build.yml

@@ -1,9 +1,8 @@
 name: image
 
-# Builds the flashable postmarketOS images for the Fairphone 6 (kernel from
+# Builds a flashable postmarketOS image for the Fairphone 6 (kernel from
-# milos-linux combined-stable + imsd) — Plasma Mobile (fp6-img.tar.xz) and
+# milos-linux combined-stable + imsd) and publishes it as the rolling
-# Phosh (fp6-img-phosh.tar.xz) — and publishes both as the rolling 'latest'
+# 'latest' release.
-# release.
 #
 # Runs on the dedicated privileged runner label "pmos" (loop devices for
 # pmbootstrap install, qemu-user binfmt on the host for the aarch64 chroots).
@@ -35,16 +34,9 @@ jobs:
         with:
           persist-credentials: true
 
-      - name: Build image (Plasma Mobile)
+      - name: Build image
         run: ./build.sh
 
-      # Second UI from the same package builds (the kernel and the aports
-      # above are already current in pmbootstrap's work dir, so this is the
-      # install + export only): fp6-img-phosh.tar.xz next to fp6-img.tar.xz
-      # in the same release.
-      - name: Build image (Phosh)
-        run: FP6IMG_UI=phosh FP6IMG_KEEP_DIST=1 ./build.sh
-
       - name: Upload artifacts
         uses: actions/upload-artifact@v3
         with:

README.md

@@ -31,11 +31,6 @@ cd fp6-img
 ./install.sh
 ```
 
-Two images are published per release, same kernel and packages, different
-shell: `fp6-img.tar.xz` boots **Plasma Mobile** (calls through Plasma
-Dialer), `fp6-img-phosh.tar.xz` boots **Phosh** (calls through GNOME Calls,
-via imsd's `imsd-ofono` backend). Pick one; the install steps are identical.
-
 `install.sh` erases dtbo, flashes the rootfs, **RAM-boots** the kernel, writes the boot partition from
 inside Linux where the bootloader's NV-wipe cannot see it, then reads the modem
 NV back and reports the result. The bootloader never writes `boot`.

aports/device/callaudioshim/APKBUILD

@@ -3,27 +3,22 @@
 # Earpiece port), leaving plasma-dialer's mute button dead and blocking
 # kde-telephony-daemon 25s per call; see the script header for the full
 # write-up. The callaudiod package stays installed (plasma-mobile depends on
-# it); this package replaces its D-Bus activation file, so activating
+# it) — this shim simply owns org.mobian_project.CallAudio first via an
-# org.mobian_project.CallAudio starts the shim in any session. Phosh
+# early-phase autostart, so D-Bus activation of the real daemon never fires.
-# activates the name at startup, before autostart runs, and the stock daemon
+# Deployed and tested on the development FP6.
-# used to win there (1-r0). Removing this package removes the activation file
-# too; 'apk fix callaudiod' restores callaudiod's. Deployed and tested on the
-# development FP6.
 maintainer="Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>"
 pkgname=callaudioshim
 pkgver=1
-pkgrel=1
+pkgrel=0
 pkgdesc="callaudiod replacement shim: working in-call mic mute on the FP6"
 url="https://forgejo.catcrafts.net/Catcrafts/fp6-img"
 arch="noarch"
 license="GPL-3.0-only"
 depends="python3 py3-dbus py3-gobject3 wireplumber"
-replaces="callaudiod"
 options="!check"
 source="
 	callaudioshim.py
 	callaudioshim.desktop
-	org.mobian_project.CallAudio.service
 "
 
 package() {
@@ -31,12 +26,9 @@ package() {
 		"$pkgdir"/usr/libexec/callaudioshim.py
 	install -Dm644 "$srcdir"/callaudioshim.desktop \
 		"$pkgdir"/etc/xdg/autostart/callaudioshim.desktop
-	install -Dm644 "$srcdir"/org.mobian_project.CallAudio.service \
-		"$pkgdir"/usr/share/dbus-1/services/org.mobian_project.CallAudio.service
 }
 
 sha512sums="
-05995f0f732319559ccd9a7f3891c6363261e52ddbdf13b812fce580dbb816c362bd76da36cb9f1c7ee203d5ce2486762ffe46a7660dd4bc10c8bf2b4cd1a8ca  callaudioshim.py
+7ca7d75402ea6c48a7c1c19c5c5ed6e556f2c0133aa6e32a12f5c5a1afc0c791f04ebd40102a4b92b0dd87f9330ae64ada025c344525b9ed17289acd8cb952d7  callaudioshim.py
 060b76660398115af26463425db5a6a2d634b6bdbf48a8ae488528403f8e086a9ef23470316196e6ccd8cb65e0ebd09bbc0df2ff5f8a830407d98404f439c706  callaudioshim.desktop
-6b44134e3f3ed0a8c3314b0b0cf9a9e5483850cdfb54f486d23199dd9f5f1ee66d674a391126e803796db69182f980b30a714457a81c9a447e146bc9ba5992bd  org.mobian_project.CallAudio.service
 "

aports/device/callaudioshim/callaudioshim.py

@@ -37,11 +37,9 @@ interface (verified against callaudiod's org.mobian_project.CallAudio.xml):
     dynamic in this setup — journal/audio.md 2026-07-18). SpeakerState
     defaults to ON. When an Earpiece UCM device exists these become real.
 
-Stock callaudiod must not own the name. The package replaces callaudiod's
+Stock callaudiod must not own the name: pkill it and mask its D-Bus
-D-Bus activation file with one that starts this shim, so whichever client asks
+activation (see journal/ims.md s44 deploy notes). Runs as the session user
-first — Phosh activates the name at startup, before autostart runs — gets the
+(autostart .desktop), no root needed.
-shim; the KDE early-phase autostart stays for the DialerUtils push at session
-start. Runs as the session user, no root needed.
 """
 import subprocess
 
@@ -187,12 +185,7 @@ class CallAudio(dbus.service.Object):
 def main():
     dbus.mainloop.glib.DBusGMainLoop(set_as_default=True)
     session = dbus.SessionBus()
-    try:
     name = dbus.service.BusName(BUS_NAME, session, do_not_queue=True)  # noqa: F841
-    except dbus.exceptions.NameExistsException:
-        # activated and autostarted in the same session: the first one serves
-        log(f"callaudioshim: {BUS_NAME} already owned; exiting")
-        return
     CallAudio(session)
     log(f"callaudioshim: owning {BUS_NAME}")
     GLib.MainLoop().run()

aports/device/callaudioshim/org.mobian_project.CallAudio.service

@@ -1,3 +0,0 @@
-[D-BUS Service]
-Name=org.mobian_project.CallAudio
-Exec=/usr/libexec/callaudioshim.py

build.sh

@@ -30,18 +30,6 @@ KERNEL_BRANCH=combined-stable
 # sha256; that gated fresh installs only, never upgrades, and cost a commit
 # and an image run per release.
 REGISTRY=https://forgejo.catcrafts.net/api/packages/Catcrafts/alpine/edge/fp6
-# FP6IMG_UI: which postmarketOS UI the image boots into. plasma-mobile (the
-# default) gets imsd-dialerd from the imsd package itself; phosh gets the
-# opt-in imsd-ofono subpackage (imsd-ofonod + the GNOME Calls plugin
-# override) on top. Everything else in the package set is UI-agnostic. The
-# archive is named after it: fp6-img.tar.xz for plasma-mobile,
-# fp6-img-<ui>.tar.xz otherwise, so one release can carry both.
-FP6IMG_UI=${FP6IMG_UI:-plasma-mobile}
-case "$FP6IMG_UI" in
-plasma-mobile) UI_PACKAGES=; IMG_NAME=fp6-img ;;
-phosh)         UI_PACKAGES=,imsd-ofono; IMG_NAME=fp6-img-phosh ;;
-*) echo "FP6IMG_UI=$FP6IMG_UI: expected plasma-mobile or phosh" >&2; exit 1 ;;
-esac
 PMAPORTS_REPO=https://gitlab.postmarketos.org/postmarketOS/pmaports.git
 
 cd "$(dirname "$0")"
@@ -95,13 +83,11 @@ if [ "$(id -u)" = 0 ]; then
 	id build >/dev/null 2>&1 || adduser -D build
 	echo 'build ALL=(ALL) NOPASSWD: ALL' > /etc/sudoers.d/build
 	# empty dist in place (never delete the dir itself: a shell cd'd into it
-	# would poison the next podman invocation's cwd). FP6IMG_KEEP_DIST=1 keeps
+	# would poison the next podman invocation's cwd)
-	# what is there: the second UI build of one run adds its archive next to
-	# the first one's.
 	install -d -o build dist
-	[ -n "${FP6IMG_KEEP_DIST:-}" ] || find dist -mindepth 1 -delete
+	find dist -mindepth 1 -delete
 	# su scrubs the environment — carry the knobs that matter across it
-	exec su build -c "FP6IMG_NO_CROSSDIRECT='${FP6IMG_NO_CROSSDIRECT:-}' FP6IMG_UI='${FP6IMG_UI:-}' sh -eu '$PWD/build.sh'"
+	exec su build -c "FP6IMG_NO_CROSSDIRECT='${FP6IMG_NO_CROSSDIRECT:-}' sh -eu '$PWD/build.sh'"
 fi
 
 # git hosts occasionally hiccup (our forgejo lives on a small VM that also
@@ -232,9 +218,9 @@ cat > "$HOME/.config/pmbootstrap_v3.cfg" <<EOF
 [pmbootstrap]
 aports = $WORK/pmaports
 device = fairphone-fp6
-ui = $FP6IMG_UI
+ui = plasma-mobile
 systemd = always
-extra_packages = soc-fairphone-fp6-audio,callaudioshim,imsd,fingerprintd,fingerprintd-systemd,fingerprintd-agent,fp6-device-tweaks,fp6-charging-mode,catcrafts-fp6-repo,postmarketos-base-ui-audio-backend-pipewire,pipewire-pulse,pipewire-echo-cancel$UI_PACKAGES
+extra_packages = soc-fairphone-fp6-audio,callaudioshim,imsd,fingerprintd,fingerprintd-systemd,fingerprintd-agent,fp6-device-tweaks,fp6-charging-mode,catcrafts-fp6-repo,postmarketos-base-ui-audio-backend-pipewire,pipewire-pulse,pipewire-echo-cancel
 EOF
 
 # All four source tarballs are generated locally above, so every checksum
@@ -287,7 +273,7 @@ if [ ! -f "$REGISTRY_KEY" ]; then
 	exit 1
 fi
 retry "fetch registry packages" python3 ./registry-fetch.py "$REGISTRY" "$REGISTRY_KEY" "$REG_DL" \
-	imsd,imsd-systemd,imsd-ofono fingerprintd,fingerprintd-systemd,fingerprintd-agent
+	imsd,imsd-systemd fingerprintd,fingerprintd-systemd,fingerprintd-agent
 ABUILD_KEY=$(echo "$WORKDIR"/config_abuild/*.rsa)
 if [ ! -f "$ABUILD_KEY" ]; then
 	echo "expected exactly one abuild key in $WORKDIR/config_abuild" >&2
@@ -339,22 +325,21 @@ pmbootstrap export "$EXPORT"
 # so the archive is built without a second 3 GiB copy on disk.
 STAGE="$WORK/stage"
 rm -rf "$STAGE"
-mkdir -p "$STAGE/$IMG_NAME"
+mkdir -p "$STAGE/fp6-img"
-ln -s "$EXPORT/boot.img" "$STAGE/$IMG_NAME/boot.img"
+ln -s "$EXPORT/boot.img" "$STAGE/fp6-img/boot.img"
-ln -s "$EXPORT/fairphone-fp6.img" "$STAGE/$IMG_NAME/fairphone-fp6.img"
+ln -s "$EXPORT/fairphone-fp6.img" "$STAGE/fp6-img/fairphone-fp6.img"
-cp README.md install.sh "$STAGE/$IMG_NAME/"
+cp README.md install.sh "$STAGE/fp6-img/"
 {
 	echo "kernel:        $KERNEL_REPO $KERNEL_BRANCH @ $COMMIT"
-	echo "ui:            $FP6IMG_UI"
 	echo "built:         $(date -u +%Y-%m-%dT%H:%M:%SZ)"
 	echo "default login: user / 147147 (same as official postmarketOS images)"
 	while read -r _n _v _s; do
 		printf '%-14s %s %s-%s (newest registry package, sha256 %s)\n' "$_n:" "$REGISTRY" "$_n" "$_v" "$_s"
 	done < "$REG_DL/manifest"
-} > "$STAGE/$IMG_NAME/build-info.txt"
+} > "$STAGE/fp6-img/build-info.txt"
 # sums of the extracted contents
-(cd "$STAGE/$IMG_NAME" && sha256sum -- * > sha256sums.txt)
+(cd "$STAGE/fp6-img" && sha256sum -- * > sha256sums.txt)
-tar -C "$STAGE" -chf - "$IMG_NAME" | xz -T0 -6 > "dist/$IMG_NAME.tar.xz"
+tar -C "$STAGE" -chf - fp6-img | xz -T0 -6 > dist/fp6-img.tar.xz
 rm -rf "$STAGE"
 
 ls -la dist/