build.yml: annotate the rolling 'latest' tag, so its release stays on top

Forgejo orders the releases page by each release's creation time and
resets that time from the tag at every tag push: a lightweight tag gives
the tagged commit's time, an annotated tag the tagger's. A push's dated
release is tagged at push time, after its commits, so the lightweight
'latest' tag always sorted below it (2026-11-01: 'latest' created
01:09:36Z = the tip's commit time, the dated release 02:02:09Z = its
tag's time). An annotated tag made when the run ends is newer than any
dated release tagged before the images were built.

.forgejo/workflows/build.yml

@@ -73,21 +73,33 @@ jobs:
           fi
           apk add -q curl
           found=0
-          for f in /home/build/.local/var/pmbootstrap/packages/*/aarch64/*.apk; do
+          publish() {
-            [ -e "$f" ] || continue
+            case "$(basename "$1")" in
-            case "$(basename "$f")" in
+              imsd-*|fingerprintd-*) echo "registry-sourced, not republished: $(basename "$1")"; return 0 ;;
-              imsd-*|fingerprintd-*) echo "registry-sourced, not republished: $(basename "$f")"; continue ;;
+              libqmi-*|qmi-utils-*) echo "retired fork, not republished: $(basename "$1")"; return 0 ;;
-              libqmi-*|qmi-utils-*) echo "retired fork, not republished: $(basename "$f")"; continue ;;
             esac
             found=1
             code=$(curl -s -o /dev/null -w '%{http_code}' \
-              --user "catbot:$PACKAGE_TOKEN" --upload-file "$f" \
+              --user "catbot:$PACKAGE_TOKEN" --upload-file "$1" \
               "https://forgejo.catcrafts.net/api/packages/Catcrafts/alpine/edge/fp6")
             case "$code" in
-              201) echo "published: $(basename "$f")" ;;
+              201) echo "published: $(basename "$1")" ;;
-              409) echo "already published: $(basename "$f")" ;;
+              409) echo "already published: $(basename "$1")" ;;
-              *)   echo "FAILED ($code): $(basename "$f")"; exit 1 ;;
+              *)   echo "FAILED ($code): $(basename "$1")"; exit 1 ;;
             esac
+          }
+          # The kernel goes last: a publish that fails part-way (the first
+          # failed upload ends this step) must never leave the registry serving
+          # a kernel without the userspace its card name needs - the 7.3 kernel
+          # has its topology and UCM only in soc-fairphone-fp6-audio >= 5.
+          for f in /home/build/.local/var/pmbootstrap/packages/*/aarch64/*.apk; do
+            [ -e "$f" ] || continue
+            case "$(basename "$f")" in linux-postmarketos-qcom-milos-*) continue ;; esac
+            publish "$f"
+          done
+          for f in /home/build/.local/var/pmbootstrap/packages/*/aarch64/linux-postmarketos-qcom-milos-*.apk; do
+            [ -e "$f" ] || continue
+            publish "$f"
           done
           [ "$found" = 1 ] || { echo "no packages found to publish"; exit 1; }
 
@@ -96,7 +108,11 @@ jobs:
           git config --global --add safe.directory "$PWD"
           git config user.email "ci@catcrafts.net"
           git config user.name "fp6-img CI"
-          git tag -f latest
+          # Annotated, so the release keeps the top of the releases page:
+          # Forgejo stamps a release with its tag's time at every tag push -
+          # a lightweight tag's is the commit's, older than the dated release
+          # tagged at push time; an annotated tag's is now.
+          git tag -a -f latest -m "Latest FP6 Nura image, built $(date -u +%Y-%m-%d) from $(git rev-parse --short HEAD)"
           git push origin latest --force
 
       - name: Publish rolling 'latest' release

FUNDING.yml

@@ -0,0 +1,2 @@
+# Read by Forgejo for the repository's Donate button.
+custom: 'https://catcrafts.net/shop/donation'

LICENSE

@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

README.md

@@ -38,3 +38,17 @@ NV back and reports the result. The bootloader never writes `boot`.
 
 Default login: `user` / `147147` (same as official Nura images). 
 **Never re-lock the bootloader** with a custom image installed.
+
+## License
+
+GPL-3.0-only - see [LICENSE](LICENSE).
+
+Patches and packaging carried from other projects keep the license named in their files.
+
+## Funding
+
+https://catcrafts.net/shop/donation - see [FUNDING](FUNDING.yml)
+
+## Copyright
+
+Copyright (C) 2026 Catcrafts® [catcrafts.net](https://catcrafts.net/)

aports/device/catcrafts-fp6-repo/APKBUILD

@@ -10,7 +10,7 @@ pkgrel=0
 pkgdesc="Catcrafts FP6 apk repository (signing key + repositories entry)"
 url="https://forgejo.catcrafts.net/Catcrafts/-/packages"
 arch="noarch"
-license="MIT"
+license="GPL-3.0-only"
 options="!check"
 install="$pkgname.post-install $pkgname.post-upgrade"
 _keyname="catcrafts@f79ff8fc14285f7824dd6a8c36ac814751da19ab7ed47c516f089a311ab7fe57.rsa.pub"

aports/device/fp6-charging-mode/APKBUILD

@@ -31,7 +31,7 @@ pkgrel=0
 pkgdesc="Fairphone 6 offline charging mode (charger-boot detection + minimal charging target)"
 url="https://forgejo.catcrafts.net/Catcrafts/fp6-img"
 arch="noarch"
-license="MIT"
+license="GPL-3.0-only"
 options="!check"
 source="
 	charging-mode-generator

aports/device/fp6-device-tweaks/APKBUILD

@@ -24,7 +24,7 @@ pkgrel=1
 pkgdesc="Fairphone 6 device-critical system configuration"
 url="https://forgejo.catcrafts.net/Catcrafts/fp6-img"
 arch="noarch"
-license="MIT"
+license="GPL-3.0-only"
 # apk-native ban: with this meta installed, the resolver routes Plasma
 # Mobile's audio through real PulseAudio, which claims the card and runs
 # wireplumber in a video-only profile - no sinks, ever

aports/device/fp6-vendor-blobs/30-ath11k-board-data.manifest

@@ -0,0 +1,17 @@
+# WCN6750 WLAN board data (calibration, Qualcomm/Fairphone) - taken from the
+# stock modem partition on-device instead of being shipped (fp6 repo
+# journal/base/ 2026-10-14, journal/blobs/). The device tree asks ath11k for
+# the Fairphone_Gen_6 entry; upstream linux-firmware's board-2.bin has none,
+# the driver silently falls back to generic data, and on that the FP6 Plus
+# does not associate at all (user report 2026-10-14) while the FP6's scans
+# no longer find the 5 GHz networks around it, so it associates on 2.4 GHz
+# only (dev phone A/B 2026-11-01). The container built here is upstream's
+# file with every entry kept plus the device's own bdwlan.elf under the
+# requested name; it lives in /lib/firmware/updates, which the loader
+# searches first. Active slot first, the other slot as fallback; no hash pin
+# - the ELF belongs to the stock modem image and can change with it. No
+# rebind line: the service runs before the driver loads, so a fresh install
+# has the container at the first probe and an installed phone gets it at
+# its next boot - a re-probe from a package hook would restart wifi in the
+# middle of an upgrade.
+ath11k-bdf modem_a,modem_b image/qca6750/bdwlan.elf bus=ahb,qmi-chip-id=1,qmi-board-id=255,variant=Fairphone_Gen_6 /usr/lib/firmware/ath11k/WCN6750/hw1.0/board-2.bin.zst /usr/lib/firmware/updates/ath11k/WCN6750/hw1.0/board-2.bin

aports/device/fp6-vendor-blobs/APKBUILD

@@ -12,28 +12,33 @@
 # drops a previously-shipped blob restores the file immediately instead of
 # at the next boot (--refresh in addition for an mbn consumer: it re-derives
 # the trustlet from the active slot even if a file is present). Consumers:
-# soc-fairphone-fp6-audio (aw88261 acf), fingerprintd (focal64 trustlet).
+# soc-fairphone-fp6-audio (aw88261 acf), fingerprintd (focal64 trustlet);
+# this package's own 30-ath11k-board-data fragment (WLAN board data).
 #
 # 1-r3 (2026-09-11): active slot first, an unpinned ('-') structurally
 # verified mode for mbn, --refresh -- after two field units got no
 # fingerprint sensor from a whole-image hash pin that can only match one
 # Android build (fp6 repo journal/blobs/, journal/fingerprint/).
+# 1-r4 (2026-10-14): the ath11k-bdf directive -- the WLAN board data the
+# device tree asks for, built on-device from the stock modem partition
+# (the FP6 Plus does not associate on upstream's generic data).
 maintainer="Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>"
 pkgname=fp6-vendor-blobs
 pkgver=1
-pkgrel=3
+pkgrel=4
 pkgdesc="On-device extraction of vendor blobs from the stock Android partitions"
 url="https://forgejo.catcrafts.net/Catcrafts/fp6-img"
 arch="noarch"
-license="MIT"
+license="GPL-3.0-only"
 # fallback mapper for when the initramfs didn't map the dynamic partitions
-depends="make-dynpart-mappings"
+depends="make-dynpart-mappings zstd"
 install="$pkgname.post-upgrade"
 options="!check"
 source="
 	fp6-vendor-blobs-extract
 	fp6-vendor-blobs.service
 	fp6-vendor-blobs.preset
+	30-ath11k-board-data.manifest
 "
 
 package() {
@@ -42,8 +47,9 @@ package() {
 	install -Dm644 "$srcdir"/fp6-vendor-blobs.service \
 		"$pkgdir"/usr/lib/systemd/system/fp6-vendor-blobs.service
 	# enabled unconditionally: the unit is a fast no-op once every manifest
-	# dest exists, and blobs appearing on first boot must not depend on a
+	# dest exists and every ath11k-bdf override is current against its base,
-	# manual systemctl enable. sysinit = the real (pre-coldplug) run;
+	# and blobs appearing on first boot must not depend on a manual
+	# systemctl enable. sysinit = the real (pre-coldplug) run;
 	# multi-user = the post-udev retry if the early run failed (see unit)
 	mkdir -p "$pkgdir"/etc/systemd/system/sysinit.target.wants \
 		"$pkgdir"/etc/systemd/system/multi-user.target.wants
@@ -58,11 +64,13 @@ package() {
 	# extracted, no sound card. See journal/blobs/ 2026-08-28.
 	install -Dm644 "$srcdir"/fp6-vendor-blobs.preset \
 		"$pkgdir"/usr/lib/systemd/system-preset/50-fp6-vendor-blobs.preset
-	mkdir -p "$pkgdir"/usr/share/fp6-vendor-blobs/manifest.d
+	install -Dm644 "$srcdir"/30-ath11k-board-data.manifest \
+		"$pkgdir"/usr/share/fp6-vendor-blobs/manifest.d/30-ath11k-board-data.manifest
 }
 
 sha512sums="
-e9618b4a1ccbe0913a608b32a1a9e87337e3da79a3d7ccc7f49292ae9aaa9406d2ea9817d63b3cfff2c4346b80dd2476c10725f4f0f95c859acd17b22ec03a16  fp6-vendor-blobs-extract
+6aee5f56bc7bc960537b7ca1069305b56a5ec8da99a58298ba1715e93f002d391a2bd24be78214428b0297f9e3cfd1003a243c76a2d08397dcac63a7d800d302  fp6-vendor-blobs-extract
 b4c290095d9f39515378dfef08de720ce49324210342aa13c131dfce1103785e796e6f821f0c659671a4c44b46f466ce0e03f11f216fdcdee2a99db5e7970800  fp6-vendor-blobs.service
 9e79dd0aed13f11a71282aa24b2a26331e85c105e25ab0c0fed6189b8c300769a5f4308b18b91d9855868d658ad3a57c03e26c9b11bd27fd5e03f9a5decbbd6a  fp6-vendor-blobs.preset
+f13d7b384a9b577762693c6831fbf28cb9e92e4f943af1917ddeba121c582f0c85c81a3e01e8e9ff6367c3717b6c37743f019db297f75339871292cf816bfc91  30-ath11k-board-data.manifest
 "

aports/device/fp6-vendor-blobs/fp6-vendor-blobs-extract

@@ -11,6 +11,7 @@
 #
 #   file <partition[,partition...]> <path-in-partition> <dest> <sha256>
 #   mbn  <partition[,partition...]> <dir-in-partition> <name> <dest> <sha256|->
+#   ath11k-bdf <partition[,partition...]> <path-in-partition> <entry-name> <base> <dest>
 #   rebind <bus> <device>
 #
 # Partition lists are tried in the order written, except that on an A/B
@@ -47,6 +48,24 @@
 #   itself and refuses a damaged or foreign image (one flipped byte ->
 #   ERROR_ELF_SIGNATURE_ERROR, measured 2026-09-03). The sha256 of what was
 #   installed is logged either way.
+# ath11k-bdf: the WLAN board data (calibration) the device tree asks ath11k
+#   for by name, e.g. bus=ahb,qmi-chip-id=1,qmi-board-id=255,variant=Fairphone_Gen_6.
+#   Upstream linux-firmware's board-2.bin carries no Fairphone entry, so the
+#   driver silently falls back to the generic board-id data; the FP6 Plus does
+#   not associate on it (user report 2026-10-14, fp6 repo journal/base/). The
+#   stock modem partition has the device's own file (image/qca6750/bdwlan.elf).
+#   This directive copies it and wraps it into a container at <dest> (the
+#   loader searches /lib/firmware/updates first): <base> (board-2.bin or
+#   board-2.bin.zst, every upstream entry kept byte for byte) + one BOARD
+#   entry named <entry-name> holding the ELF. Verified structurally (ELF
+#   magic, sane size, the container's own magic), never by a pinned hash:
+#   the ELF belongs to the stock modem image and can change with it.
+#   The driver takes the first BOARD entry whose name matches, so an entry
+#   upstream ships under the same name is used before the appended copy.
+#   The sha256 of the <base> used is kept in <dest>.fp6-base: a <base> that
+#   changed since (a linux-firmware upgrade) rebuilds <dest> at the next
+#   run, and so does --refresh. A rebuild that reproduces the existing
+#   <dest> byte for byte installs nothing and does not count as extracted.
 # rebind: if this fragment's run extracted at least one file, unbind and
 #   re-probe <device> on <bus> so the consuming driver picks the file up
 #   in the same boot. Unconditional on purpose: a still-bound consumer may
@@ -64,8 +83,9 @@
 # --if-device: exit 0 quietly when no stock super partition is visible
 #   (apk post-install scripts run inside build/CI chroots too; on images
 #   built there the first-boot service does the real extraction).
-# --refresh: re-derive every mbn dest even if it exists, replacing it only
+# --refresh: re-derive every mbn and ath11k-bdf dest even if it exists,
-#   with an image that verifies (a failed refresh leaves the old file). For
+#   replacing it only with an image that verifies (a failed refresh leaves
+#   the old file). For
 #   the consumer's post-install/post-upgrade: a fresh 'apk add' gets its
 #   trustlet without a reboot, and a trustlet that was hand-placed or pinned
 #   to another build is replaced by the active slot's on the next upgrade.
@@ -257,6 +277,76 @@ extract_mbn() { # <partition,...> <dir-in-partition> <name> <dest> <sha256|->
 	fail "no listed partition ($parts) yields $rname with sha256 $want - $dest NOT installed$kept"
 }
 
+# One little-endian u32 as four raw bytes (busybox printf, octal escapes).
+le32() { # <value>
+	printf "\\$(printf %03o $(($1 & 255)))\\$(printf %03o $((($1 >> 8) & 255)))\\$(printf %03o $((($1 >> 16) & 255)))\\$(printf %03o $((($1 >> 24) & 255)))"
+}
+pad4() { # <length> -> bytes of zero padding to the next multiple of 4, on stdout
+	n=$(( (4 - $1 % 4) % 4 ))
+	[ "$n" -gt 0 ] && head -c "$n" /dev/zero
+	return 0
+}
+# <dest>.fp6-base records the sha256 of the <base> <dest> was built from.
+bdf_base_id() { sha256sum "$1" | awk '{print $1}'; }
+bdf_current() { # <base> <dest> - true when <dest> exists and was built from this <base>
+	[ -f "$1" ] && [ -e "$2" ] && [ -f "$2.fp6-base" ] || return 1
+	read -r bh bs < "$2.fp6-base"
+	[ "$bh" = "$(bdf_base_id "$1")" ]
+}
+extract_ath11k_bdf() { # <partition,...> <path-in-partition> <entry-name> <base> <dest>
+	parts=$1 bsrc=$2 bname=$3 bbase=$4 bdest=$5
+	[ -f "$bbase" ] || fail "ath11k-bdf: base container $bbase missing"
+	bid=$(bdf_base_id "$bbase")
+	braw="$bdest.fp6-raw.$$"
+	mkdir -p "${bdest%/*}" || fail "cannot create ${bdest%/*}"
+	case "$bbase" in
+	*.zst) zstd -dcq "$bbase" > "$braw" 2>/dev/null || { rm -f "$braw"; fail "ath11k-bdf: cannot decompress $bbase"; } ;;
+	*) cp "$bbase" "$braw" || { rm -f "$braw"; fail "ath11k-bdf: cannot read $bbase"; } ;;
+	esac
+	[ "$(head -c 16 "$braw")" = "QCA-ATH11K-BOARD" ] || { rm -f "$braw"; fail "ath11k-bdf: $bbase is not a QCA-ATH11K-BOARD container"; }
+	# the driver walks the entries 4-byte aligned; an entry appended to an
+	# unaligned base would be misread and the generic data used silently
+	bsz=$(fsize "$braw")
+	[ $(( bsz % 4 )) -eq 0 ] || { rm -f "$braw"; fail "ath11k-bdf: $bbase is $bsz bytes, not a multiple of 4"; }
+	for part in $(order_parts "$parts"); do
+		mount_part "$part" || { log "$part: not mountable, trying next"; continue; }
+		elf="$MNT/$bsrc"
+		[ -f "$elf" ] || { log "$part: no $bsrc, trying next"; continue; }
+		esz=$(fsize "$elf")
+		[ "$(hex4 "$elf")" = 7f454c46 ] || { log "$part:$bsrc: not an ELF image, trying next"; continue; }
+		[ "$esz" -ge 4096 ] && [ "$esz" -le $((1024 * 1024)) ] || { log "$part:$bsrc: $esz bytes is not a board data file, trying next"; continue; }
+		nlen=${#bname}
+		npad=$(( (nlen + 3) / 4 * 4 ))
+		dpad=$(( (esz + 3) / 4 * 4 ))
+		tmp="$bdest.fp6-extract.$$"
+		# container = base + BOARD IE { NAME IE, DATA IE }, each IE padded to 4
+		{
+			cat "$braw"
+			le32 0; le32 $((8 + npad + 8 + dpad))
+			le32 0; le32 "$nlen"; printf '%s' "$bname"; pad4 "$nlen"
+			le32 1; le32 "$esz"; cat "$elf"; pad4 "$esz"
+		} > "$tmp" 2>/dev/null || { rm -f "$tmp"; fail "ath11k-bdf: writing $tmp failed"; }
+		want=$(( $(fsize "$braw") + 8 + 8 + npad + 8 + dpad ))
+		tsz=$(fsize "$tmp")
+		[ "$tsz" -eq "$want" ] || { rm -f "$tmp" "$braw"; fail "ath11k-bdf: $tmp is $tsz bytes, expected $want"; }
+		got=$(sha256sum "$tmp" | awk '{print $1}')
+		if [ -e "$bdest" ] && [ "$(sha256sum "$bdest" | awk '{print $1}')" = "$got" ]; then
+			rm -f "$tmp" "$braw"
+			echo "$bid" > "$bdest.fp6-base" || fail "ath11k-bdf: cannot write $bdest.fp6-base"
+			log "ath11k-bdf: $bdest is already $bbase + $bname from $part:$bsrc (sha256 $got) - unchanged"
+			return 2
+		fi
+		chmod 644 "$tmp" && mv "$tmp" "$bdest" || { rm -f "$tmp" "$braw"; fail "installing $bdest failed"; }
+		echo "$bid" > "$bdest.fp6-base" || fail "ath11k-bdf: cannot write $bdest.fp6-base"
+		rm -f "$braw"
+		log "built $bdest = $bbase + $bname from $part:$bsrc ($esz bytes, sha256 $got)"
+		return 0
+	done
+	rm -f "$braw"
+	kept=
+	[ -e "$bdest" ] && kept=" (the existing file is left in place)"
+	fail "no listed partition ($parts) yields a well-formed $bsrc - $bdest NOT installed$kept"
+}
 extract() { # <partition,...> <path-in-partition> <dest> <sha256>
 	parts=$1 src=$2 dest=$3 want=$4
 	for part in $(order_parts "$parts"); do
@@ -312,7 +402,8 @@ fi
 
 [ -d "$MANIFEST_DIR" ] || exit 0
 
-# fast path for every boot after the first: all dests already present
+# fast path for every boot after the first: every file/mbn dest present and
+# every ath11k-bdf dest current against its base (bdf_current)
 missing=
 for f in "$MANIFEST_DIR"/*.manifest; do
 	[ -e "$f" ] || continue
@@ -320,6 +411,7 @@ for f in "$MANIFEST_DIR"/*.manifest; do
 		case "$kind" in
 		file) [ -e "$c" ] || missing=1 ;;
 		mbn)  [ -e "$d" ] && [ -z "$REFRESH" ] || missing=1 ;;
+		ath11k-bdf) [ -z "$REFRESH" ] && bdf_current "$d" "$e" || missing=1 ;;
 		esac
 	done < "$f"
 done
@@ -345,6 +437,12 @@ for f in "$MANIFEST_DIR"/*.manifest; do
 			extract_mbn "$a" "$b" "$c" "$d" "$e" </dev/null
 			extracted=1
 			;;
+		ath11k-bdf)
+			[ -n "$e" ] || fail "$f: malformed ath11k-bdf line"
+			[ -z "$REFRESH" ] && bdf_current "$d" "$e" && continue
+			extract_ath11k_bdf "$a" "$b" "$c" "$d" "$e" </dev/null
+			[ $? -eq 0 ] && extracted=1
+			;;
 		rebind)
 			[ -n "$b" ] || fail "$f: malformed rebind line"
 			rebinds="$rebinds $a/$b"

aports/device/linux-postmarketos-qcom-milos/0001-resolve_btfids-preserve-tag-and-parameter-names-when.patch

@@ -1,91 +0,0 @@
-From d648a5fd7f95d961126605d59da5ad007c265bda Mon Sep 17 00:00:00 2001
-From: Aelin Reidel <aelin@mainlining.org>
-Date: Wed, 17 Jun 2026 00:38:17 +0200
-Subject: [PATCH] resolve_btfids: preserve tag and parameter names when
- processing implicit args
-
-process_kfunc_with_implicit_args() obtains parameter names through
-btf__name_by_offset() and passes them to btf__add_func_param() while
-constructing a new function prototype. Tag names are processed in a
-similar fashion.
-
-The returned name pointer references memory owned by the BTF object.
-btf__add_func_param(), btf__add_decl_tag(), etc. modify the same BTF and
-may grow its internal storage, invalidating previously returned string
-pointers.
-
-This can result in btf__add_func_param(), btf__add_decl_tag(), etc.
-dereferencing a stale pointer when copying the string, leading to crashes
-in strset__add_str().
-
-Duplicate the parameter name before calling btf__add_func_param() so it
-remains valid across BTF updates.
-
-Fixes: 9d199965990c ("resolve_btfids: Support for KF_IMPLICIT_ARGS")
-Cc: stable@vger.kernel.org
-Signed-off-by: Aelin Reidel <aelin@mainlining.org>
----
- tools/bpf/resolve_btfids/main.c | 20 +++++++++++++++-----
- 1 file changed, 15 insertions(+), 5 deletions(-)
-
-diff --git a/tools/bpf/resolve_btfids/main.c b/tools/bpf/resolve_btfids/main.c
-index f8a91fa7584f..94b89e9c942e 100644
---- a/tools/bpf/resolve_btfids/main.c
-+++ b/tools/bpf/resolve_btfids/main.c
-@@ -1113,6 +1113,7 @@ static int process_kfunc_with_implicit_args(struct btf2btf_context *ctx, struct
- {
- 	s32 idx, new_proto_id, new_func_id, proto_id;
- 	const char *param_name, *tag_name;
-+	char *tmp_param_name, *tmp_tag_name;
- 	const struct btf_param *params;
- 	enum btf_func_linkage linkage;
- 	char tmp_name[KSYM_NAME_LEN];
-@@ -1163,18 +1164,22 @@ static int process_kfunc_with_implicit_args(struct btf2btf_context *ctx, struct
- 		if (strcmp(tag_name, "bpf_kfunc") == 0)
- 			continue;
- 
-+		tmp_tag_name = strdup(tag_name);
- 		idx = btf_decl_tag(t)->component_idx;
- 
- 		if (btf_kflag(t))
--			err = btf__add_decl_attr(btf, tag_name, new_func_id, idx);
-+			err = btf__add_decl_attr(btf, tmp_tag_name, new_func_id, idx);
- 		else
--			err = btf__add_decl_tag(btf, tag_name, new_func_id, idx);
-+			err = btf__add_decl_tag(btf, tmp_tag_name, new_func_id, idx);
- 
- 		if (err < 0) {
- 			pr_err("ERROR: resolve_btfids: failed to add decl tag %s for %s\n",
--			       tag_name, tmp_name);
-+			       tmp_tag_name, tmp_name);
-+			free(tmp_tag_name);
- 			return -EINVAL;
- 		}
-+
-+		free(tmp_tag_name);
- 	}
- 
- add_new_proto:
-@@ -1193,12 +1198,17 @@ static int process_kfunc_with_implicit_args(struct btf2btf_context *ctx, struct
- 		if (is_kf_implicit_arg(btf, &params[i]))
- 			break;
- 		param_name = btf__name_by_offset(btf, params[i].name_off);
--		err = btf__add_func_param(btf, param_name, params[i].type);
-+		tmp_param_name = strdup(param_name);
-+		if (!tmp_param_name)
-+			return -ENOMEM;
-+		err = btf__add_func_param(btf, tmp_param_name, params[i].type);
- 		if (err < 0) {
- 			pr_err("ERROR: resolve_btfids: failed to add param %s for %s\n",
--			       param_name, kfunc->name);
-+			       tmp_param_name, kfunc->name);
-+			free(tmp_param_name);
- 			return err;
- 		}
-+		free(tmp_param_name);
- 		t = (struct btf_type *)btf__type_by_id(btf, proto_id);
- 	}
- 
--- 
-2.54.0
-

aports/device/linux-postmarketos-qcom-milos/APKBUILD

@@ -1,12 +1,15 @@
-# Fork of pmaports device/testing/linux-postmarketos-qcom-milos (7.2.0-r0),
+# Fork of pmaports device/testing/linux-postmarketos-qcom-milos (7.2.0-r0; pmaports
-# overlaid via pmbootstrap so it shadows the upstream aport. Differences:
+# still ships 7.2.0), overlaid via pmbootstrap so it shadows the upstream aport.
-# source is the Catcrafts combined-stable branch (upstream v7.2.0-milos tag +
+# Differences: source is the Catcrafts combined-stable branch (upstream
-# the FP6 bring-up carries), and the config is the exact one the development
+# v7.3.0-milos tag + the FP6 bring-up carries); the config is the exact one
-# FP6 runs, plus CONFIG_EFI_ZBOOT for the packaging below.
+# the development FP6 runs, plus CONFIG_EFI_ZBOOT for the packaging below;
+# build() targets the FP6's own cores (KCFLAGS); and the package depends on
+# soc-fairphone-fp6-audio >= 5, which carries the topology and UCM for the
+# card name the 7.3 DTS uses.
 maintainer="Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>"
 _flavor="postmarketos-qcom-milos"
 pkgname=linux-$_flavor
-pkgver=7.2.0
+pkgver=7.3.0
 # always sorts above the upstream aport (r0..r99)
 pkgrel=103
 pkgdesc="Milos mainline kernel + Catcrafts FP6 bring-up carries (combined-stable)"
@@ -14,6 +17,13 @@ arch="aarch64"
 _carch="arm64"
 url="https://forgejo.catcrafts.net/Catcrafts/milos-linux"
 license="GPL-2.0-only"
+# The 7.3 DTS names the sound card MILOS-Fairphone-Gen6; only
+# soc-fairphone-fp6-audio >= 5 installs the topology and UCM under that
+# name. Without this bound a kernel-only upgrade boots with no sound card at
+# all: the topology load fails and the card does not instantiate.
+# A pkgver floor, not a pkgrel one: pmbootstrap resolves a versioned
+# dependency on an aport against its pkgver alone.
+depends="soc-fairphone-fp6-audio>=5"
 options="!strip !check !tracedeps
 	pmb:cross-native
 	pmb:kconfigcheck-community
@@ -45,7 +55,6 @@ _commit="REPLACED_BY_CI"
 
 source="
 	milos-linux-$_commit.tar.gz
-	0001-resolve_btfids-preserve-tag-and-parameter-names-when.patch
 	$_config
 "
 builddir="$srcdir/milos-linux"
@@ -92,6 +101,5 @@ package() {
 
 sha512sums="
 REPLACED_BY_CI  milos-linux-REPLACED_BY_CI.tar.gz
-4e705e038a91466a86fc5317b0028c2220aa1e7a4807e5d86db2f9ac815a927c59666a8f21ed50c4632147d3ce183d8042378a76f95341dbcd3db1047faf39e3  0001-resolve_btfids-preserve-tag-and-parameter-names-when.patch
 REPLACED_BY_CI  config-postmarketos-qcom-milos.aarch64
 "

aports/device/linux-postmarketos-qcom-milos/config-postmarketos-qcom-milos.aarch64

@@ -1,16 +1,16 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm64 7.2.0 Kernel Configuration
+# Linux/arm64 7.3.0 Kernel Configuration
 #
-CONFIG_CC_VERSION_TEXT="clang version 22.1.8"
+CONFIG_CC_VERSION_TEXT="clang version 23.1.3"
 CONFIG_GCC_VERSION=0
 CONFIG_CC_IS_CLANG=y
-CONFIG_CLANG_VERSION=220108
+CONFIG_CLANG_VERSION=230103
 CONFIG_AS_IS_LLVM=y
-CONFIG_AS_VERSION=220108
+CONFIG_AS_VERSION=230103
 CONFIG_LD_VERSION=0
 CONFIG_LD_IS_LLD=y
-CONFIG_LLD_VERSION=220108
+CONFIG_LLD_VERSION=230103
 CONFIG_RUSTC_VERSION=0
 CONFIG_RUSTC_LLVM_VERSION=0
 CONFIG_RUSTC_LLVM_MAJOR_VERSION=0
@@ -25,8 +25,9 @@ CONFIG_CC_HAS_COUNTED_BY=y
 CONFIG_CC_HAS_COUNTED_BY_PTR=y
 CONFIG_CC_HAS_ALLOC_TOKEN=y
 CONFIG_CC_HAS_MULTIDIMENSIONAL_NONSTRING=y
+CONFIG_CC_OPT_INLINE_MEMSET="-mllvm -max-store-memset=4294967294"
 CONFIG_LD_CAN_USE_KEEP_IN_OVERLAY=y
-CONFIG_PAHOLE_VERSION=131
+CONFIG_PAHOLE_VERSION=132
 CONFIG_IRQ_WORK=y
 CONFIG_BUILDTIME_TABLE_SORT=y
 CONFIG_THREAD_INFO_IN_TASK=y
@@ -119,6 +120,7 @@ CONFIG_ARCH_HAS_PREEMPT_LAZY=y
 CONFIG_PREEMPT=y
 # CONFIG_PREEMPT_LAZY is not set
 CONFIG_PREEMPT_COUNT=y
+CONFIG_HAS_SEPARATE_PREEMPT_RESCHED_BITS=y
 CONFIG_PREEMPTION=y
 # CONFIG_PREEMPT_DYNAMIC is not set
 # CONFIG_SCHED_CORE is not set
@@ -171,11 +173,12 @@ CONFIG_UCLAMP_TASK=y
 CONFIG_UCLAMP_BUCKETS_COUNT=5
 # end of Scheduler features
 
+CONFIG_ARCH_HAS_PTE_PROTNONE=y
 CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
 CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
 CONFIG_CC_HAS_INT128=y
 CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
-CONFIG_CC_MS_EXTENSIONS="-fms-extensions"
+CONFIG_CC_MS_EXTENSIONS="-fms-anonymous-structs"
 CONFIG_GCC10_NO_ARRAY_BOUNDS=y
 CONFIG_GCC_NO_STRINGOP_OVERFLOW=y
 CONFIG_ARCH_SUPPORTS_INT128=y
@@ -239,7 +242,6 @@ CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_LD_ORPHAN_WARN=y
 CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
-CONFIG_SYSCTL=y
 CONFIG_HAVE_UID16=y
 CONFIG_SYSCTL_EXCEPTION_TRACE=y
 CONFIG_SYSFS_SYSCALL=y
@@ -407,7 +409,7 @@ CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
 CONFIG_ARM64_ERRATUM_1165522=y
 CONFIG_ARM64_ERRATUM_1319367=y
 CONFIG_ARM64_ERRATUM_1530923=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
+CONFIG_ARM64_WORKAROUND_REPEAT_TLBI_SYNC=y
 CONFIG_ARM64_ERRATUM_2441007=y
 CONFIG_ARM64_ERRATUM_1286807=y
 CONFIG_ARM64_ERRATUM_1463225=y
@@ -420,8 +422,10 @@ CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
 CONFIG_ARM64_ERRATUM_2054223=y
 CONFIG_ARM64_ERRATUM_2067961=y
 CONFIG_ARM64_ERRATUM_2441009=y
+CONFIG_ARM64_WORKAROUND_BROKEN_AMU_CONSTCNT=y
 CONFIG_ARM64_ERRATUM_2457168=y
 CONFIG_ARM64_ERRATUM_2645198=y
+CONFIG_ARM64_ERRATUM_3821522=y
 CONFIG_ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD=y
 CONFIG_ARM64_ERRATUM_2966298=y
 CONFIG_ARM64_ERRATUM_3117295=y
@@ -445,6 +449,8 @@ CONFIG_QCOM_QDF2400_ERRATUM_0065=y
 CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
 CONFIG_ARM64_WORKAROUND_DISABLE_CNP=y
 CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
+CONFIG_NVIDIA_OLYMPUS_1027_ERRATUM=y
+CONFIG_RENESAS_ERRATUM_GEN4GICITS1=y
 CONFIG_ROCKCHIP_ERRATUM_3568002=y
 CONFIG_ROCKCHIP_ERRATUM_3588001=y
 # CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set
@@ -536,7 +542,6 @@ CONFIG_ARM64_TLB_RANGE=y
 #
 CONFIG_AS_HAS_ARMV8_5=y
 CONFIG_ARM64_BTI=y
-CONFIG_ARM64_BTI_KERNEL=y
 CONFIG_CC_HAS_BRANCH_PROT_PAC_RET_BTI=y
 CONFIG_ARM64_E0PD=y
 CONFIG_ARM64_AS_HAS_MTE=y
@@ -914,6 +919,7 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_LOCK_SPIN_ON_OWNER=y
 CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
 CONFIG_QUEUED_SPINLOCKS=y
+# CONFIG_QUEUED_SPINLOCKS_TRACE_CONTENDED_RELEASE is not set
 CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
 CONFIG_QUEUED_RWLOCKS=y
 CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
@@ -989,7 +995,7 @@ CONFIG_PAGE_REPORTING=y
 CONFIG_NUMA_MIGRATION=y
 CONFIG_MIGRATION=y
 CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
-CONFIG_ARCH_ENABLE_THP_MIGRATION=y
+CONFIG_ARCH_HAS_PMD_SOFTLEAVES=y
 CONFIG_CONTIG_ALLOC=y
 CONFIG_PCP_BATCH_SCALE_MAX=5
 CONFIG_PHYS_ADDR_T_64BIT=y
@@ -1056,6 +1062,7 @@ CONFIG_LOCK_MM_AND_FIND_VMA=y
 CONFIG_EXECMEM=y
 CONFIG_NUMA_MEMBLKS=y
 # CONFIG_NUMA_EMU is not set
+CONFIG_GENERIC_ARCH_NUMA=y
 CONFIG_ARCH_HAS_USER_SHADOW_STACK=y
 CONFIG_PT_RECLAIM=y
 CONFIG_ARCH_HAS_LAZY_MMU_MODE=y
@@ -1723,9 +1730,7 @@ CONFIG_REGMAP_MMIO=y
 CONFIG_REGMAP_IRQ=y
 CONFIG_REGMAP_SOUNDWIRE=m
 CONFIG_DMA_SHARED_BUFFER=y
-# CONFIG_DMA_FENCE_TRACE is not set
 CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_ARCH_NUMA=y
 # CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
 # end of Generic Driver Options
 
@@ -1814,6 +1819,8 @@ CONFIG_ARM_PSCI_FW=y
 #
 # Qualcomm firmware drivers
 #
+CONFIG_QCOM_PAS=y
+CONFIG_QCOM_PAS_TEE=m
 CONFIG_QCOM_SCM=y
 CONFIG_QCOM_TZMEM=y
 CONFIG_QCOM_TZMEM_MODE_GENERIC=y
@@ -1911,7 +1918,6 @@ CONFIG_QCOM_FASTRPC=m
 # CONFIG_LATTICE_ECP3_CONFIG is not set
 CONFIG_SRAM=y
 # CONFIG_XILINX_SDFEC is not set
-# CONFIG_HISI_HIKEY_USB is not set
 # CONFIG_OPEN_DICE is not set
 CONFIG_NTSYNC=m
 # CONFIG_VCPU_STALL_DETECTOR is not set
@@ -1921,14 +1927,9 @@ CONFIG_NTSYNC=m
 #
 # EEPROM support
 #
-CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
 # CONFIG_EEPROM_IDT_89HPESX is not set
-# CONFIG_EEPROM_EE1004 is not set
-# CONFIG_EEPROM_M24LR is not set
 # end of EEPROM support
 
 # CONFIG_SENSORS_LIS3_SPI is not set
@@ -1938,6 +1939,8 @@ CONFIG_EEPROM_AT24=m
 # CONFIG_UACCE is not set
 # CONFIG_PVPANIC is not set
 # CONFIG_AMD_SBRMI_I2C is not set
+# CONFIG_AMD_SBTSI is not set
+# CONFIG_INTEL_SSEI is not set
 # end of Misc devices
 
 #
@@ -2090,6 +2093,7 @@ CONFIG_NET_VENDOR_I825XX=y
 CONFIG_NET_VENDOR_INTEL=y
 CONFIG_NET_VENDOR_ADI=y
 # CONFIG_ADIN1110 is not set
+# CONFIG_ADIN1140 is not set
 CONFIG_NET_VENDOR_LITEX=y
 # CONFIG_LITEX_LITEETH is not set
 CONFIG_NET_VENDOR_MARVELL=y
@@ -2149,6 +2153,7 @@ CONFIG_NET_VENDOR_WIZNET=y
 CONFIG_NET_VENDOR_XILINX=y
 # CONFIG_XILINX_EMACLITE is not set
 # CONFIG_XILINX_LL_TEMAC is not set
+CONFIG_NET_VENDOR_ZTE=y
 CONFIG_QCOM_IPA=m
 CONFIG_PHYLINK=m
 CONFIG_PHYLIB=y
@@ -2167,6 +2172,7 @@ CONFIG_FIXED_PHY=y
 # CONFIG_AMD_PHY is not set
 # CONFIG_ADIN_PHY is not set
 # CONFIG_ADIN1100_PHY is not set
+# CONFIG_ADIN1140_PHY is not set
 # CONFIG_AQUANTIA_PHY is not set
 CONFIG_AX88796B_PHY=m
 # CONFIG_BROADCOM_PHY is not set
@@ -2176,6 +2182,7 @@ CONFIG_AX88796B_PHY=m
 # CONFIG_BCM87XX_PHY is not set
 # CONFIG_CICADA_PHY is not set
 # CONFIG_CORTINA_PHY is not set
+# CONFIG_DAP8211R_PHY is not set
 # CONFIG_DAVICOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_LXT_PHY is not set
@@ -2220,6 +2227,10 @@ CONFIG_AX88796B_PHY=m
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_XILINX_GMII2RGMII is not set
 # CONFIG_PSE_CONTROLLER is not set
+
+#
+# MDIO controller drivers
+#
 CONFIG_FWNODE_MDIO=y
 CONFIG_OF_MDIO=y
 # CONFIG_MDIO_BITBANG is not set
@@ -2237,6 +2248,8 @@ CONFIG_OF_MDIO=y
 # CONFIG_MDIO_BUS_MUX_GPIO is not set
 # CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
 # CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# end of MDIO Multiplexers
+# end of MDIO controller drivers
 
 #
 # PCS device drivers
@@ -2333,6 +2346,11 @@ CONFIG_WLAN_VENDOR_MEDIATEK=y
 CONFIG_WLAN_VENDOR_MICROCHIP=y
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set
+CONFIG_WLAN_VENDOR_MORSEMICRO=y
+# CONFIG_MM81X_USB is not set
+# CONFIG_MM81X_SDIO is not set
+CONFIG_WLAN_VENDOR_NXP=y
+# CONFIG_NXPWIFI_SDIO is not set
 CONFIG_WLAN_VENDOR_PURELIFI=y
 # CONFIG_PLFXLC is not set
 CONFIG_WLAN_VENDOR_RALINK=y
@@ -2484,6 +2502,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_EGALAX is not set
 # CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
+CONFIG_TOUCHSCREEN_ESWIN_EPH8621=y
 # CONFIG_TOUCHSCREEN_EXC3000 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GOODIX is not set
@@ -2569,6 +2588,7 @@ CONFIG_INPUT_UINPUT=y
 # CONFIG_INPUT_IQS269A is not set
 # CONFIG_INPUT_IQS626A is not set
 # CONFIG_INPUT_IQS7222 is not set
+# CONFIG_INPUT_ISA1200_HAPTIC is not set
 # CONFIG_INPUT_CMA3000 is not set
 # CONFIG_INPUT_DRV260X_HAPTICS is not set
 # CONFIG_INPUT_DRV2665_HAPTICS is not set
@@ -2693,6 +2713,7 @@ CONFIG_HW_RANDOM_OPTEE=y
 # CONFIG_HW_RANDOM_CCTRNG is not set
 # CONFIG_HW_RANDOM_XIPHERA is not set
 CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=y
+CONFIG_HW_RANDOM_QCOM=y
 # CONFIG_DEVMEM is not set
 CONFIG_DEVPORT=y
 # CONFIG_TCG_TPM is not set
@@ -2866,6 +2887,7 @@ CONFIG_GENERIC_PINCONF=y
 # CONFIG_DEBUG_PINCTRL is not set
 # CONFIG_PINCTRL_AW9523 is not set
 # CONFIG_PINCTRL_CY8C95X0 is not set
+# CONFIG_PINCTRL_GENERIC_MUX is not set
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
 # CONFIG_PINCTRL_OCELOT is not set
@@ -2886,6 +2908,7 @@ CONFIG_PINCTRL_MSM=y
 # CONFIG_PINCTRL_IPQ9574 is not set
 # CONFIG_PINCTRL_IPQ9650 is not set
 # CONFIG_PINCTRL_KAANAPALI is not set
+CONFIG_PINCTRL_MAILI=y
 # CONFIG_PINCTRL_MDM9607 is not set
 # CONFIG_PINCTRL_MSM8916 is not set
 # CONFIG_PINCTRL_MSM8917 is not set
@@ -3102,7 +3125,9 @@ CONFIG_BATTERY_QCOM_BATTMGR=y
 # CONFIG_CHARGER_BQ2515X is not set
 # CONFIG_CHARGER_BQ25890 is not set
 # CONFIG_CHARGER_BQ25980 is not set
+# CONFIG_CHARGER_BQ25630 is not set
 # CONFIG_CHARGER_BQ256XX is not set
+# CONFIG_CHARGER_SGM41542 is not set
 # CONFIG_CHARGER_SMB347 is not set
 # CONFIG_BATTERY_GAUGE_LTC2941 is not set
 # CONFIG_BATTERY_GOLDFISH is not set
@@ -3145,6 +3170,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ASC7621 is not set
 # CONFIG_SENSORS_ASUS_ROG_RYUJIN is not set
 # CONFIG_SENSORS_AXI_FAN_CONTROL is not set
+# CONFIG_SENSORS_KB9002 is not set
 # CONFIG_SENSORS_ARCTIC_FAN_CONTROLLER is not set
 # CONFIG_SENSORS_ARM_SCMI is not set
 # CONFIG_SENSORS_ATXP1 is not set
@@ -3243,7 +3269,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_PMBUS is not set
 # CONFIG_SENSORS_PT5161L is not set
-# CONFIG_SENSORS_SBTSI is not set
 # CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SHT21 is not set
 # CONFIG_SENSORS_SHT3x is not set
@@ -3843,6 +3868,8 @@ CONFIG_VIDEO_CAMERA_SENSOR=y
 # CONFIG_VIDEO_IMX355 is not set
 # CONFIG_VIDEO_IMX412 is not set
 # CONFIG_VIDEO_IMX415 is not set
+# CONFIG_VIDEO_IMX471 is not set
+# CONFIG_VIDEO_IMX678 is not set
 CONFIG_VIDEO_IMX896=m
 # CONFIG_VIDEO_MT9M001 is not set
 # CONFIG_VIDEO_MT9M111 is not set
@@ -4401,6 +4428,7 @@ CONFIG_DRM_PANEL=y
 # Display Panels
 #
 # CONFIG_DRM_PANEL_ABT_Y030XX067A is not set
+# CONFIG_DRM_PANEL_ANBERNIC_TD4310 is not set
 # CONFIG_DRM_PANEL_ARM_VERSATILE is not set
 # CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 is not set
 # CONFIG_DRM_PANEL_AUO_A030JTN01 is not set
@@ -4410,6 +4438,7 @@ CONFIG_DRM_PANEL=y
 # CONFIG_DRM_PANEL_BOE_TH101MB31UIG002_28A is not set
 # CONFIG_DRM_PANEL_BOE_TV101WUM_NL6 is not set
 # CONFIG_DRM_PANEL_BOE_TV101WUM_LL2 is not set
+# CONFIG_DRM_PANEL_CHIPONE_ICNA35XX is not set
 # CONFIG_DRM_PANEL_CHIPWEALTH_CH13726A is not set
 # CONFIG_DRM_PANEL_EBBG_FT8719 is not set
 # CONFIG_DRM_PANEL_ELIDA_KD35T133 is not set
@@ -4425,8 +4454,10 @@ CONFIG_DRM_PANEL=y
 # CONFIG_DRM_PANEL_HIMAX_HX83121A is not set
 # CONFIG_DRM_PANEL_HIMAX_HX8394 is not set
 # CONFIG_DRM_PANEL_HYDIS_HV101HD1 is not set
+# CONFIG_DRM_PANEL_ILITEK_ILI7807S is not set
 # CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
 # CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set
+# CONFIG_DRM_PANEL_ILITEK_ILI9488 is not set
 # CONFIG_DRM_PANEL_ILITEK_ILI9805 is not set
 # CONFIG_DRM_PANEL_ILITEK_ILI9806E_DSI is not set
 # CONFIG_DRM_PANEL_ILITEK_ILI9806E_SPI is not set
@@ -4459,6 +4490,7 @@ CONFIG_DRM_PANEL=y
 # CONFIG_DRM_PANEL_NOVATEK_NT35560 is not set
 # CONFIG_DRM_PANEL_NOVATEK_NT35950 is not set
 # CONFIG_DRM_PANEL_NOVATEK_NT36523 is not set
+# CONFIG_DRM_PANEL_NOVATEK_NT36536 is not set
 # CONFIG_DRM_PANEL_NOVATEK_NT36672A is not set
 # CONFIG_DRM_PANEL_NOVATEK_NT36672E is not set
 # CONFIG_DRM_PANEL_NOVATEK_NT37700F is not set
@@ -4477,6 +4509,7 @@ CONFIG_DRM_PANEL_NOVATEK_NT37705=m
 # CONFIG_DRM_PANEL_RAYDIUM_RM692E5 is not set
 # CONFIG_DRM_PANEL_RAYDIUM_RM69380 is not set
 # CONFIG_DRM_PANEL_RENESAS_R61307 is not set
+# CONFIG_DRM_PANEL_RENESAS_R63419 is not set
 # CONFIG_DRM_PANEL_RENESAS_R69328 is not set
 # CONFIG_DRM_PANEL_RONBO_RB070D30 is not set
 # CONFIG_DRM_PANEL_SAMSUNG_AMS581VF01 is not set
@@ -4615,6 +4648,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_KTD253 is not set
 # CONFIG_BACKLIGHT_KTD2801 is not set
 # CONFIG_BACKLIGHT_KTZ8866 is not set
+# CONFIG_BACKLIGHT_SY7758 is not set
 # CONFIG_BACKLIGHT_MAX25014 is not set
 CONFIG_BACKLIGHT_QCOM_WLED=y
 # CONFIG_BACKLIGHT_ADP8860 is not set
@@ -4902,6 +4936,8 @@ CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ADAU1701 is not set
 # CONFIG_SND_SOC_ADAU1761_I2C is not set
 # CONFIG_SND_SOC_ADAU1761_SPI is not set
+# CONFIG_SND_SOC_ADAU1977_SPI is not set
+# CONFIG_SND_SOC_ADAU1977_I2C is not set
 # CONFIG_SND_SOC_ADAU7002 is not set
 # CONFIG_SND_SOC_ADAU7118_HW is not set
 # CONFIG_SND_SOC_ADAU7118_I2C is not set
@@ -5025,6 +5061,7 @@ CONFIG_SND_SOC_HDMI_CODEC=y
 # CONFIG_SND_SOC_RT5640 is not set
 # CONFIG_SND_SOC_RT5645 is not set
 # CONFIG_SND_SOC_RT5659 is not set
+# CONFIG_SND_SOC_RT5677 is not set
 # CONFIG_SND_SOC_RT5682_SDW is not set
 # CONFIG_SND_SOC_RT700_SDW is not set
 # CONFIG_SND_SOC_RT711_SDW is not set
@@ -5124,6 +5161,7 @@ CONFIG_SND_SOC_WCD9378_SDW=m
 # CONFIG_SND_SOC_WSA881X is not set
 # CONFIG_SND_SOC_WSA883X is not set
 # CONFIG_SND_SOC_WSA884X is not set
+# CONFIG_SND_SOC_WSA885X is not set
 # CONFIG_SND_SOC_ZL38060 is not set
 # CONFIG_SND_SOC_MAX9759 is not set
 # CONFIG_SND_SOC_MT6351 is not set
@@ -5203,11 +5241,13 @@ CONFIG_HID_GFRM=m
 CONFIG_HID_GLORIOUS=m
 CONFIG_HID_HOLTEK=m
 CONFIG_HOLTEK_FF=y
+# CONFIG_HID_HYPERX is not set
 CONFIG_HID_VIVALDI_COMMON=m
 CONFIG_HID_GOODIX_SPI=m
 CONFIG_HID_GOOGLE_STADIA_FF=m
 CONFIG_HID_VIVALDI=m
 CONFIG_HID_GT683R=m
+# CONFIG_HID_MSI is not set
 CONFIG_HID_KEYTOUCH=m
 CONFIG_HID_KYE=m
 # CONFIG_HID_KYSONA is not set
@@ -5313,6 +5353,7 @@ CONFIG_HID_MCP2221=m
 #
 # HID-BPF support
 #
+# CONFIG_HID_BPF is not set
 # end of HID-BPF support
 
 CONFIG_I2C_HID=y
@@ -5732,6 +5773,7 @@ CONFIG_LEDS_CLASS_MULTICOLOR=m
 # CONFIG_LEDS_SPI_BYTE is not set
 # CONFIG_LEDS_LM3697 is not set
 # CONFIG_LEDS_ST1202 is not set
+# CONFIG_LEDS_LTC3220 is not set
 
 #
 # Flash and Torch LED drivers
@@ -6031,13 +6073,21 @@ CONFIG_COMMON_CLK=y
 # CONFIG_COMMON_CLK_VC5 is not set
 # CONFIG_COMMON_CLK_VC7 is not set
 # CONFIG_COMMON_CLK_FIXED_MMIO is not set
+
+#
+# Cixtech Audio Subsystem Clock Driver
+#
+# end of Cixtech Audio Subsystem Clock Driver
+
 CONFIG_QCOM_GDSC=y
 CONFIG_COMMON_CLK_QCOM=y
 # CONFIG_CLK_ELIZA_DISPCC is not set
 # CONFIG_CLK_ELIZA_GCC is not set
 # CONFIG_CLK_ELIZA_TCSRCC is not set
+CONFIG_CLK_GLYMUR_CAMCC=m
 # CONFIG_CLK_GLYMUR_DISPCC is not set
-# CONFIG_CLK_GLYMUR_GCC is not set
+CONFIG_CLK_GLYMUR_EVACC=m
+CONFIG_CLK_GLYMUR_GCC=m
 # CONFIG_CLK_GLYMUR_GPUCC is not set
 # CONFIG_CLK_GLYMUR_TCSRCC is not set
 # CONFIG_CLK_GLYMUR_VIDEOCC is not set
@@ -6047,7 +6097,12 @@ CONFIG_COMMON_CLK_QCOM=y
 # CONFIG_CLK_KAANAPALI_GPUCC is not set
 # CONFIG_CLK_KAANAPALI_TCSRCC is not set
 # CONFIG_CLK_KAANAPALI_VIDEOCC is not set
-# CONFIG_CLK_NORD_GCC is not set
+CONFIG_CLK_NORD_DISPCC=m
+CONFIG_CLK_MAILI_VIDEOCC=m
+CONFIG_CLK_NORD_GCC=m
+CONFIG_CLK_SHIKRA_AUDIOCORECC=m
+CONFIG_CLK_SHIKRA_GCC=y
+CONFIG_CLK_NORD_GPUCC=m
 # CONFIG_CLK_X1E80100_CAMCC is not set
 # CONFIG_CLK_X1E80100_DISPCC is not set
 # CONFIG_CLK_X1E80100_GCC is not set
@@ -6058,15 +6113,14 @@ CONFIG_COMMON_CLK_QCOM=y
 # CONFIG_CLK_X1P42100_VIDEOCC is not set
 # CONFIG_CLK_QCM2290_GPUCC is not set
 # CONFIG_QCOM_A53PLL is not set
-# CONFIG_QCOM_A7PLL is not set
 # CONFIG_QCOM_CLK_APCC_MSM8996 is not set
 CONFIG_QCOM_CLK_RPMH=y
-# CONFIG_CLK_HAWI_GCC is not set
+CONFIG_CLK_HAWI_GCC=m
 # CONFIG_CLK_HAWI_TCSRCC is not set
+CONFIG_CLK_HAWI_VIDEOCC=m
 # CONFIG_IPQ_APSS_PLL is not set
 # CONFIG_IPQ_APSS_5424 is not set
 # CONFIG_IPQ_CMN_PLL is not set
-# CONFIG_IPQ_GCC_4019 is not set
 # CONFIG_IPQ_GCC_5018 is not set
 # CONFIG_IPQ_GCC_5210 is not set
 # CONFIG_IPQ_GCC_5332 is not set
@@ -6261,6 +6315,7 @@ CONFIG_QCOM_IOMMU=y
 #
 CONFIG_REMOTEPROC=y
 # CONFIG_REMOTEPROC_CDEV is not set
+# CONFIG_AMD_MBV_BRAM_REMOTEPROC is not set
 CONFIG_QCOM_PIL_INFO=m
 CONFIG_QCOM_RPROC_COMMON=m
 CONFIG_QCOM_Q6V5_COMMON=m
@@ -6331,23 +6386,15 @@ CONFIG_SOUNDWIRE_QCOM=y
 # end of Enable LiteX SoC Builder specific drivers
 
 # CONFIG_WPCM450_SOC is not set
-
+CONFIG_QCOM_SOC=y
-#
-# Qualcomm SoC drivers
-#
 CONFIG_QCOM_AOSS_QMP=y
 CONFIG_QCOM_COMMAND_DB=y
 CONFIG_QCOM_GENI_SE=y
-# CONFIG_QCOM_GSBI is not set
 CONFIG_QCOM_LLCC=y
-CONFIG_QCOM_MDT_LOADER=y
 # CONFIG_QCOM_OCMEM is not set
 CONFIG_QCOM_PD_MAPPER=y
-CONFIG_QCOM_PDR_HELPERS=y
-CONFIG_QCOM_PDR_MSG=y
 # CONFIG_QCOM_PMIC_PDCHARGER_ULOG is not set
 CONFIG_QCOM_PMIC_GLINK=y
-CONFIG_QCOM_QMI_HELPERS=y
 # CONFIG_QCOM_RAMP_CTRL is not set
 CONFIG_QCOM_RMTFS_MEM=y
 # CONFIG_QCOM_RPM_MASTER_STATS is not set
@@ -6363,10 +6410,12 @@ CONFIG_QCOM_STATS=y
 # CONFIG_QCOM_WCNSS_CTRL is not set
 CONFIG_QCOM_APR=y
 CONFIG_QCOM_ICC_BWMON=y
-CONFIG_QCOM_INLINE_CRYPTO_ENGINE=y
 # CONFIG_QCOM_PBS is not set
-# end of Qualcomm SoC drivers
+CONFIG_QCOM_INLINE_CRYPTO_ENGINE=y
-
+CONFIG_QCOM_MDT_LOADER=y
+CONFIG_QCOM_PDR_HELPERS=y
+CONFIG_QCOM_PDR_MSG=y
+CONFIG_QCOM_QMI_HELPERS=y
 CONFIG_QCOM_UBWC_CONFIG=y
 # CONFIG_SOC_TI is not set
 
@@ -6593,6 +6642,7 @@ CONFIG_QCOM_SPMI_ADC5=y
 # CONFIG_TI_ADS1018 is not set
 # CONFIG_TI_ADS1100 is not set
 # CONFIG_TI_ADS1119 is not set
+# CONFIG_TI_ADS112C14 is not set
 # CONFIG_TI_ADS124S08 is not set
 # CONFIG_TI_ADS1298 is not set
 # CONFIG_TI_ADS131E08 is not set
@@ -6605,6 +6655,7 @@ CONFIG_QCOM_SPMI_ADC5=y
 # CONFIG_TI_LMP92064 is not set
 # CONFIG_TI_TLC4541 is not set
 # CONFIG_TI_TSC2046 is not set
+# CONFIG_VERSAL_SYSMON_I2C is not set
 # CONFIG_VF610_ADC is not set
 # CONFIG_XILINX_XADC is not set
 # end of Analog to digital converters
@@ -6728,6 +6779,7 @@ CONFIG_IIO_INV_SENSORS_TIMESTAMP=m
 # CONFIG_MAX5821 is not set
 # CONFIG_MCP4725 is not set
 # CONFIG_MCP4728 is not set
+# CONFIG_MCP47A1 is not set
 # CONFIG_MCP47FEB02 is not set
 # CONFIG_MCP4821 is not set
 # CONFIG_MCP4922 is not set
@@ -6749,6 +6801,12 @@ CONFIG_IIO_INV_SENSORS_TIMESTAMP=m
 # CONFIG_ADMV8818 is not set
 # end of Filters
 
+#
+# Flow sensors
+#
+# CONFIG_SENSIRION_SLF3S is not set
+# end of Flow sensors
+
 #
 # Frequency Synthesizers DDS/PLL
 #
@@ -6762,6 +6820,7 @@ CONFIG_IIO_INV_SENSORS_TIMESTAMP=m
 #
 # Phase-Locked Loop (PLL) frequency synthesizers
 #
+# CONFIG_ADF41513 is not set
 # CONFIG_ADF4350 is not set
 # CONFIG_ADF4371 is not set
 # CONFIG_ADF4377 is not set
@@ -6842,6 +6901,8 @@ CONFIG_HID_SENSOR_HUMIDITY=m
 CONFIG_INV_ICM42600=m
 # CONFIG_INV_ICM42600_I2C is not set
 CONFIG_INV_ICM42600_SPI=m
+# CONFIG_INV_ICM42607_I2C is not set
+# CONFIG_INV_ICM42607_SPI is not set
 # CONFIG_INV_ICM45600_I2C is not set
 # CONFIG_INV_ICM45600_SPI is not set
 # CONFIG_INV_MPU6050_I2C is not set
@@ -6939,6 +7000,7 @@ CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
 # CONFIG_MMC5983 is not set
 # CONFIG_IIO_ST_MAGN_3AXIS is not set
 # CONFIG_INFINEON_TLV493D is not set
+# CONFIG_QMC5883L is not set
 CONFIG_QMC6308=m
 # CONFIG_SENSORS_HMC5843_I2C is not set
 # CONFIG_SENSORS_HMC5843_SPI is not set
@@ -7206,6 +7268,11 @@ CONFIG_NVMEM_LAYOUTS=y
 # CONFIG_NVMEM_LAYOUT_U_BOOT_ENV is not set
 # end of Layout Types
 
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93XX46 is not set
+# CONFIG_EEPROM_EE1004 is not set
+# CONFIG_EEPROM_M24LR is not set
 CONFIG_NVMEM_QCOM_QFPROM=y
 # CONFIG_NVMEM_QCOM_SEC_QFPROM is not set
 # CONFIG_NVMEM_RMEM is not set
@@ -7237,6 +7304,7 @@ CONFIG_INTERCONNECT_QCOM_BCM_VOTER=y
 # CONFIG_INTERCONNECT_QCOM_GLYMUR is not set
 # CONFIG_INTERCONNECT_QCOM_HAWI is not set
 # CONFIG_INTERCONNECT_QCOM_KAANAPALI is not set
+CONFIG_INTERCONNECT_QCOM_MAILI=y
 # CONFIG_INTERCONNECT_QCOM_NORD is not set
 CONFIG_INTERCONNECT_QCOM_OSM_L3=y
 # CONFIG_INTERCONNECT_QCOM_QCS615 is not set
@@ -7361,7 +7429,6 @@ CONFIG_FSCACHE=y
 CONFIG_CACHEFILES=m
 # CONFIG_CACHEFILES_DEBUG is not set
 # CONFIG_CACHEFILES_ERROR_INJECTION is not set
-# CONFIG_CACHEFILES_ONDEMAND is not set
 # end of Caches
 
 #
@@ -7395,7 +7462,7 @@ CONFIG_PROC_FS=y
 # CONFIG_PROC_KCORE is not set
 CONFIG_PROC_VMCORE=y
 # CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
-CONFIG_PROC_SYSCTL=y
+CONFIG_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_KERNFS=y
@@ -7423,7 +7490,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=m
 CONFIG_SQUASHFS_FILE_CACHE=y
@@ -7443,7 +7509,6 @@ CONFIG_SQUASHFS_XZ=y
 # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
 # CONFIG_SQUASHFS_EMBEDDED is not set
 CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -7842,16 +7907,6 @@ CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
 # CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
 # CONFIG_CRYPTO_DEV_CCP is not set
-CONFIG_CRYPTO_DEV_QCE=y
-CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
-CONFIG_CRYPTO_DEV_QCE_SHA=y
-CONFIG_CRYPTO_DEV_QCE_AEAD=y
-CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y
-# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set
-# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
-# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
-CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
-CONFIG_CRYPTO_DEV_QCOM_RNG=y
 # CONFIG_CRYPTO_DEV_VIRTIO is not set
 # CONFIG_CRYPTO_DEV_SAFEXCEL is not set
 # CONFIG_CRYPTO_DEV_CCREE is not set
@@ -7913,7 +7968,13 @@ CONFIG_CRYPTO_HASH_INFO=y
 CONFIG_CRYPTO_LIB_UTILS=y
 CONFIG_CRYPTO_LIB_AES=y
 CONFIG_CRYPTO_LIB_AES_ARCH=y
+CONFIG_CRYPTO_LIB_AES_CBC=y
 CONFIG_CRYPTO_LIB_AES_CBC_MACS=y
+CONFIG_CRYPTO_LIB_AES_CCM=y
+CONFIG_CRYPTO_LIB_AES_CTR=y
+CONFIG_CRYPTO_LIB_AES_ECB=y
+CONFIG_CRYPTO_LIB_AES_GCM=y
+CONFIG_CRYPTO_LIB_AES_XTS=y
 CONFIG_CRYPTO_LIB_ARC4=m
 CONFIG_CRYPTO_LIB_GF128MUL=y
 CONFIG_CRYPTO_LIB_BLAKE2B=y
@@ -7921,7 +7982,7 @@ CONFIG_CRYPTO_LIB_CHACHA=m
 CONFIG_CRYPTO_LIB_CHACHA_ARCH=y
 CONFIG_CRYPTO_LIB_CURVE25519=m
 CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
+CONFIG_CRYPTO_LIB_DES=m
 CONFIG_CRYPTO_LIB_GF128HASH=y
 CONFIG_CRYPTO_LIB_GF128HASH_ARCH=y
 CONFIG_CRYPTO_LIB_MD5=y
@@ -7944,7 +8005,6 @@ CONFIG_RAID6_PQ_ARCH=y
 CONFIG_RAID6_PQ_BENCHMARK=y
 CONFIG_XXHASH=y
 CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_RANDOM32_SELFTEST is not set
 CONFIG_842_COMPRESS=y
 CONFIG_842_DECOMPRESS=y
 CONFIG_ZLIB_INFLATE=y
@@ -7993,6 +8053,7 @@ CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
 CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
 CONFIG_ARCH_HAS_BATCHED_DMA_SYNC=y
 CONFIG_SWIOTLB=y
+CONFIG_SWIOTLB_DEFAULT_SIZE_MB=64
 # CONFIG_SWIOTLB_DYNAMIC is not set
 CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC=y
 CONFIG_DMA_NEED_SYNC=y
@@ -8016,7 +8077,7 @@ CONFIG_DIMLIB=y
 CONFIG_LIBFDT=y
 CONFIG_OID_REGISTRY=y
 CONFIG_UCS2_STRING=y
-CONFIG_HAVE_GENERIC_VDSO=y
+CONFIG_VDSO_DATASTORE=y
 CONFIG_GENERIC_GETTIMEOFDAY=y
 CONFIG_VDSO_GETRANDOM=y
 CONFIG_FONT_SUPPORT=y
@@ -8084,7 +8145,7 @@ CONFIG_FRAME_WARN=2048
 CONFIG_SECTION_MISMATCH_WARN_ONLY=y
 CONFIG_ARCH_WANT_FRAME_POINTERS=y
 CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_WARN_CONTEXT_ANALYSIS=y
 # end of Compile-time checks and compiler options
 
 #
@@ -8129,6 +8190,7 @@ CONFIG_ARCH_HAS_PTDUMP=y
 CONFIG_HAVE_DEBUG_KMEMLEAK=y
 # CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_PER_VMA_LOCK_STATS is not set
+# CONFIG_MEM_ALLOC_PROFILING is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SHRINKER_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -8141,7 +8203,6 @@ CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
 # CONFIG_DEBUG_VIRTUAL is not set
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_MEM_ALLOC_PROFILING is not set
 CONFIG_HAVE_ARCH_KASAN=y
 CONFIG_HAVE_ARCH_KASAN_SW_TAGS=y
 CONFIG_HAVE_ARCH_KASAN_HW_TAGS=y
@@ -8237,6 +8298,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_FREGS=y
 CONFIG_HAVE_FTRACE_GRAPH_FUNC=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
 CONFIG_HAVE_EXTRA_IPI_TRACEPOINTS=y
 CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
@@ -8258,6 +8320,7 @@ CONFIG_FUNCTION_GRAPH_TRACER=y
 # CONFIG_FUNCTION_GRAPH_RETVAL is not set
 # CONFIG_FUNCTION_GRAPH_RETADDR is not set
 CONFIG_DYNAMIC_FTRACE=y
+CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
 CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
 # CONFIG_FUNCTION_SELF_TRACING is not set
 # CONFIG_FPROBE is not set
@@ -8275,6 +8338,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_PROBE_EVENTS_DUMP_FETCHARG is not set
 CONFIG_KPROBE_EVENTS=y
 # CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
 CONFIG_UPROBE_EVENTS=y
@@ -8348,6 +8412,7 @@ CONFIG_RUNTIME_TESTING_MENU=y
 # CONFIG_TEST_WORKQUEUE is not set
 # CONFIG_TEST_BPF is not set
 # CONFIG_FIND_BIT_BENCHMARK is not set
+# CONFIG_REGION_ALLOC_BENCHMARK is not set
 # CONFIG_TEST_FIRMWARE is not set
 # CONFIG_TEST_SYSCTL is not set
 # CONFIG_TEST_UDELAY is not set

aports/device/soc-fairphone-fp6-audio/APKBUILD

@@ -2,7 +2,12 @@
 # yet: the AudioReach topology (built from Catcrafts/audioreach-topology
 # branch fp6), the UCM profile, and pipewire config. Files are
 # byte-identical to the ones deployed and tested on the development FP6.
-# The tplg/UCM target filenames contain spaces, hence the safe source names.
+# The tplg/UCM target filenames carry the sound card model string from the
+# board DTS: the q6apm topology loader requests qcom/milos/<model>-tplg.bin
+# and alsa-ucm resolves conf.d/milos/<model>.conf. Kernel 7.3 names the card
+# "MILOS-Fairphone-Gen6", 7.2 named it "Fairphone (Gen. 6)"; both files are
+# installed under the new name with the old name as a symlink, so the package
+# serves either kernel - the one still running after an upgrade included.
 #
 # The proprietary AW88261 amp config blob (aw88261_acf.bin) is NOT shipped
 # since pkgver 4: fp6-vendor-blobs extracts it from the stock vendor
@@ -10,8 +15,8 @@
 # distributed. Provenance/design: fp6 repo journal/blobs/.
 maintainer="Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>"
 pkgname=soc-fairphone-fp6-audio
-pkgver=4
+pkgver=5
-pkgrel=1
+pkgrel=0
 pkgdesc="Fairphone 6 audio topology and UCM profile"
 url="https://forgejo.catcrafts.net/Catcrafts/audioreach-topology"
 arch="noarch"
@@ -29,10 +34,14 @@ source="
 
 package() {
 	install -Dm644 "$srcdir"/fp6-tplg.bin \
+		"$pkgdir"/usr/lib/firmware/qcom/milos/MILOS-Fairphone-Gen6-tplg.bin
+	ln -s MILOS-Fairphone-Gen6-tplg.bin \
 		"$pkgdir/usr/lib/firmware/qcom/milos/Fairphone (Gen. 6)-tplg.bin"
 	install -Dm644 "$srcdir"/aw88261-acf.manifest \
 		"$pkgdir"/usr/share/fp6-vendor-blobs/manifest.d/10-aw88261-acf.manifest
 	install -Dm644 "$srcdir"/ucm-milos-fp6.conf \
+		"$pkgdir"/usr/share/alsa/ucm2/conf.d/milos/MILOS-Fairphone-Gen6.conf
+	ln -s MILOS-Fairphone-Gen6.conf \
 		"$pkgdir/usr/share/alsa/ucm2/conf.d/milos/Fairphone (Gen. 6).conf"
 	install -Dm644 "$srcdir"/HiFi.conf \
 		"$pkgdir"/usr/share/alsa/ucm2/Fairphone/fp6/HiFi.conf