fp6-img/aports/device/fp6-vendor-blobs/fp6-vendor-blobs-extract

#!/bin/sh -u
# fp6-vendor-blobs-extract - copy proprietary blobs out of the stock Android
# partitions instead of distributing them. pmOS installs flash only
# boot+userdata, so every installed FP6 still carries the stock vendor/dsp
# partitions: the device duplicates files it already contains, for its own
# operation - nothing is distributed by us or anyone else. Design, legal
# frame and on-phone verification: fp6 repo journal/blobs/.
#
# Manifest fragments: /usr/share/fp6-vendor-blobs/manifest.d/*.manifest,
# processed in sorted order; '#' comments and blank lines ignored:
#
#   file <partition[,partition...]> <path-in-partition> <dest> <sha256>
#   rebind <bus> <device>
#
# file: mount the first available listed partition READ-ONLY (ext4 also
#   gets -o noload - never a byte written to the stock partitions, not
#   even a journal replay), copy <path-in-partition> to <dest>, verify the
#   sha256. A missing source or a hash mismatch tries the next listed
#   partition; no verified copy on any of them fails the run loudly - an
#   unverified blob is never installed and a missing one never silently
#   skipped. Dests that already exist are left alone (no hashing: a
#   deliberately replaced file stays).
# rebind: if this fragment's run extracted at least one file, unbind and
#   re-probe <device> on <bus> so the consuming driver picks the file up
#   in the same boot. Unconditional on purpose: a still-bound consumer may
#   have already failed a deferred firmware request that is never retried
#   (aw88261 binds on i2c probe but requests the ACF only at card init),
#   so only a fresh probe with the file present is a known-good state.
#   All of a fragment's devices are unbound first, then re-probed, so a
#   shared sound card re-forms once instead of bouncing per device.
#
# Partitions resolve via /dev/mapper (the pmOS initramfs maps the dynamic
# partitions in super on every boot), then /dev/disk/by-partlabel (raw
# partitions like dsp_a), then one make-dynpart-mappings fallback run;
# mappings that run creates are removed again at the end.
#
# --if-device: exit 0 quietly when no stock super partition is visible
#   (apk post-install scripts run inside build/CI chroots too; on images
#   built there the first-boot service does the real extraction).

MANIFEST_DIR=/usr/share/fp6-vendor-blobs/manifest.d
SUPER=/dev/disk/by-partlabel/super
MNT=
MNT_PART=
CREATED=
TRIED_MAPPING=

log() { echo "fp6-vendor-blobs: $*"; }

unmount_cur() {
	if [ -n "$MNT" ]; then
		umount "$MNT" 2>/dev/null
		rmdir "$MNT" 2>/dev/null
		MNT= MNT_PART=
	fi
}

cleanup() {
	unmount_cur
	for name in $CREATED; do
		dmsetup remove "$name" 2>/dev/null || true
	done
	CREATED=
}

fail() {
	echo "fp6-vendor-blobs: ERROR: $*" >&2
	cleanup
	exit 1
}

# resolve a partition name to a block device
part_dev() {
	[ -b "/dev/mapper/$1" ] && { echo "/dev/mapper/$1"; return 0; }
	[ -b "/dev/disk/by-partlabel/$1" ] && { echo "/dev/disk/by-partlabel/$1"; return 0; }
	if [ -z "$TRIED_MAPPING" ] && [ -b "$SUPER" ]; then
		TRIED_MAPPING=1
		before=$(dmsetup ls 2>/dev/null | awk '{print $1}')
		make-dynpart-mappings "$SUPER" 0 2>/dev/null
		after=$(dmsetup ls 2>/dev/null | awk '{print $1}')
		for name in $after; do
			case " $before " in *" $name "*) ;; *) CREATED="$CREATED $name" ;; esac
		done
		[ -n "$CREATED" ] && log "mapped dynamic partitions:$CREATED"
		[ -b "/dev/mapper/$1" ] && { echo "/dev/mapper/$1"; return 0; }
	fi
	return 1
}

mount_part() {
	[ "$MNT_PART" = "$1" ] && return 0
	unmount_cur
	dev=$(part_dev "$1") || return 1
	dir=$(mktemp -d /run/fp6-vendor-blobs.XXXXXX) || fail "mktemp failed"
	# noload succeeds on any ext4 and correctly fails on non-ext4, where
	# plain ro cannot write anyway (erofs); a dirty ext4 is never replayed
	if ! mount -o ro,noload "$dev" "$dir" 2>/dev/null && \
	   ! mount -o ro "$dev" "$dir" 2>/dev/null; then
		rmdir "$dir" 2>/dev/null
		return 1
	fi
	MNT=$dir
	MNT_PART=$1
}

extract() { # <partition,...> <path-in-partition> <dest> <sha256>
	parts=$1 src=$2 dest=$3 want=$4
	for part in $(echo "$parts" | tr ',' ' '); do
		mount_part "$part" || { log "$part: not mountable, trying next"; continue; }
		[ -f "$MNT/$src" ] || { log "$part: no $src, trying next"; continue; }
		tmp="$dest.fp6-extract.$$"
		mkdir -p "${dest%/*}" || fail "cannot create ${dest%/*}"
		cp "$MNT/$src" "$tmp" || { rm -f "$tmp"; fail "copying $part:$src failed"; }
		got=$(sha256sum "$tmp" | awk '{print $1}')
		if [ "$got" != "$want" ]; then
			rm -f "$tmp"
			log "$part:$src sha256 $got != expected, trying next"
			continue
		fi
		chmod 644 "$tmp" && mv "$tmp" "$dest" || { rm -f "$tmp"; fail "installing $dest failed"; }
		log "extracted $part:$src -> $dest"
		return 0
	done
	fail "no listed partition ($parts) yields $src with sha256 $want - $dest NOT installed"
}

rebind_all() { # <bus/device ...>
	for rb in $1; do
		bus=${rb%%/*} dev=${rb#*/}
		[ -e "/sys/bus/$bus/devices/$dev/driver" ] || continue
		if echo "$dev" > "/sys/bus/$bus/devices/$dev/driver/unbind" 2>/dev/null; then
			log "unbound $bus $dev"
		fi
	done
	for rb in $1; do
		bus=${rb%%/*} dev=${rb#*/}
		if [ ! -e "/sys/bus/$bus/devices/$dev" ]; then
			log "rebind: no $dev on bus $bus (yet) - its driver will probe on its own"
		elif echo "$dev" > "/sys/bus/$bus/drivers_probe" 2>/dev/null; then
			log "re-probed $bus $dev"
		else
			log "rebind: drivers_probe of $dev failed (driver not loaded yet?)"
		fi
	done
}

if [ "${1:-}" = --if-device ] && [ ! -b "$SUPER" ]; then
	log "no stock super partition visible (build chroot?), nothing to do"
	exit 0
fi

[ -d "$MANIFEST_DIR" ] || exit 0

# fast path for every boot after the first: all dests already present
missing=
for f in "$MANIFEST_DIR"/*.manifest; do
	[ -e "$f" ] || continue
	while read -r kind _ _ dest _; do
		[ "$kind" = file ] && [ ! -e "$dest" ] && missing=1
	done < "$f"
done
[ -z "$missing" ] && exit 0

for f in "$MANIFEST_DIR"/*.manifest; do
	[ -e "$f" ] || continue
	extracted=
	rebinds=
	while read -r kind a b c d; do
		case "$kind" in
		''|'#'*) ;;
		file)
			[ -n "$d" ] || fail "$f: malformed file line"
			[ -e "$c" ] && continue
			extract "$a" "$b" "$c" "$d" </dev/null
			extracted=1
			;;
		rebind)
			[ -n "$b" ] || fail "$f: malformed rebind line"
			rebinds="$rebinds $a/$b"
			;;
		*) fail "$f: unknown directive '$kind'" ;;
		esac
	done < "$f"
	if [ -n "$extracted" ] && [ -n "$rebinds" ]; then
		rebind_all "$rebinds" </dev/null
	fi
done

cleanup
exit 0