- Shell 85.6%
- Python 14.4%
| Filename | Latest commit message | Latest commit date |
|---|---|---|
|
All checks were successful
image / image (push) Successful in 55m31s
combined-stable gains "soc: qcom: pmic_glink: fail sends while the remoteproc is down" (9169881dc733, merged as 27825d9fdbd7). From the ADSP's shutdown notification until it is back up, pmic_glink now fails the requests of its battery, UCSI and altmode clients at once and reports the service down to them, which also unregisters the USB-C port for that span. Until now the requests were sent on to the crashed or stopping remoteproc. On the dev phone a crashed charger firmware left battery reads timing out for minutes while the ADSP recovery was stuck: on 2026-10-22 until PipeWire, which held the sound card open, was killed by hand; on 2026-11-09, on this package's 7.3.0_git20261031 build, until the phone was reset with the power key. The config gains CONFIG_QCOM_RPROC_COMMON=y: the fix selects the remoteproc common code, which carries the SSR notifier, into the kernel beside the built-in pmic_glink, so the qcom_common module is no longer packaged. Verified on the dev phone as 7.3.0 #pglink73 built from this tree and this config: during a commanded ADSP stop every battery read fails immediately and the USB-C port is unregistered within half a second; both are back within a second of the restart. |
||
| .forgejo/workflows | ||
| aports | ||
| .gitignore | ||
| apk-resign.py | ||
| build.sh | ||
| check-aports.sh | ||
| FUNDING.yml | ||
| install.sh | ||
| LICENSE | ||
| README.md | ||
| registry-fetch.py | ||
fp6-img
Flashable Nura images for the
Fairphone 6/6+, built from the
Catcrafts milos-linux
combined-stable kernel branch.
Maintained by Jorijn van der Graaf (TheMightyCat) at Catcrafts.
What works
Everything on the combined-stable branch: display, touch, wifi, cellular
data, NFC (reader), speaker audio, microphone, IMU, magnetometer, barometer,
ambient light/proximity, fingerprint unlock through
fingerprintd, plus
VoLTE calls (both directions) through imsd.
Flashing
Download fp6-img-{DE}.tar.xz with your preferred DE from the
latest release
({DE} is plasma for Plasma Mobile, calls through Plasma Dialer, or phosh for
Phosh, calls through GNOME Calls) and unlock the bootloader
(Fairphone's official process).
Install: with the phone in fastboot mode,
tar xf fp6-img-{DE}.tar.xz
cd fp6-img-{DE}
./install.sh
install.sh erases dtbo, flashes the rootfs, RAM-boots the kernel, writes the boot partition from
inside Linux where the bootloader's NV-wipe cannot see it, then reads the modem
NV back and reports the result. The bootloader never writes boot.
Default login: user / 147147 (same as official Nura images).
Never re-lock the bootloader with a custom image installed.
License
GPL-3.0-only - see LICENSE.
Patches and packaging carried from other projects keep the license named in their files.
Funding
https://catcrafts.net/shop/donation - see FUNDING
Copyright
Copyright (C) 2026 Catcrafts® catcrafts.net