imsd/AGENTS.md

AGENTS.md — working on imsd

This file is for coding agents and for anyone changing imsd: what the repository contains, how it is built, tested and packaged, how the daemon behaves at runtime, and the conventions a change has to follow. The README is for users: what imsd is, how to install and configure it. The configuration variables are documented there, not here (§10). Where this file and the code disagree, the code is right and this file has a bug — fix it in the same change.

1. What imsd is

imsd is a userspace IMS/VoLTE client for mainline Linux phones. The modem firmware on such phones brings up the IMS PDN but cannot carry call audio, so imsd does the whole IMS client itself: SIP registration with USIM AKA authentication over kernel IPsec (ESP), call signalling for outgoing and incoming calls, and the RTP media plane (AMR-WB, AMR, G.711) wired into PipeWire. A stock mobile dialer — Plasma Dialer, or GNOME Calls under Phosh and GNOME Mobile — places and receives real VoLTE calls on a commercial network through it.

It talks to the modem through ModemManager (mmcli) and qmicli over QRTR (the USIM AKA run goes through a UIM logical channel), installs its security associations with ip xfrm, and plays and records audio with the PipeWire tools (pw-play, pw-record). In practice that means a Qualcomm modem on a mainline kernel with working WWAN/ModemManager integration, kernel ESP, and PipeWire. The verified device/carrier combinations are in the README.

2. Repository layout

Path	What it is
project.cpp	The canonical build description, for Crafter Build. Chooses the product by --product=.
Makefile	Distro-packaging mirror of project.cpp: the same clang module pipeline, the same flags. Keep the two in sync when products, module partitions or link flags change.
lint-rules.h	The house-style lint rules (§6), registered from project.cpp through AddProjectLintRules. Project-local on purpose.
interfaces/Imsd.cppm	The primary module interface of imsd-core: export imports the seven partitions below.
interfaces/Imsd-Util.cppm	imsd::util — SIP tokens, IPv6 host/port formatting, hex/base64, MD5 (RFC 1321), the fixed protected ports PortUc/PortUs (45061/45062).
interfaces/Imsd-Sip.cppm	imsd::sip — SIP as a text layer plus TCP framing: header extraction, status codes, the granted lifetime, ResponseOf transaction matching. Not a full RFC 3261 parser, deliberately.
interfaces/Imsd-Sdp.cppm	imsd::sdp — SDP offer/answer: the AMR-WB + AMR + telephone-event offer (optional IR.92 preconditions), the parser the media plane needs, BuildAnswer for the terminating side, the CODECS override.
interfaces/Imsd-Aka.cppm	imsd::aka — USIM AKA glue: the AKAv1-MD5 digest (RFC 3310), IMPI/IMPU/realm from IMSI + MCC/MNC, parsers for qmicli --uim-get-card-status and mmcli output, the AUTHENTICATE APDU and its response.
interfaces/Imsd-Ipsec.cppm	imsd::ipsec — the two ESP SA pairs (TS 33.203) as ip xfrm argv lists, the Security-Server mechanism selection, and the reader that reconstructs SPIs/ports from ip xfrm state/policy text for a warm resume.
interfaces/Imsd-Messages.cppm	imsd::msg — every SIP request and response imsd sends, built from an explicit Context and per-request variables so the builders are pure functions; byte-pinned by tests/Messages. Also IsEmergency.
interfaces/Imsd-Engine.cppm	imsd::engine — the decisions as pure reducers: CallMachine (one call's dialog, returning Actions for the shell) and RegRecovery (the registration recovery policy, §7.4).
interfaces/ImsdBus.cppm	imsd::bus — the polkit gate in front of call control, shared by imsd and imsd-ofonod. GLib, so outside imsd-core.
implementations/main.cpp	The imsd daemon shell: GLib main loop, GDBus service, sockets, subprocesses, the registration sequence and the run loop that pumps the core.
implementations/media.cpp	imsd-media, the per-call RTP leg. Pure std + POSIX, dlopen's the AMR codecs.
implementations/dialerd.cpp	imsd-dialerd, the Plasma Mobile session-bus backend (org.kde.telephony.*).
implementations/ofonod.cpp	imsd-ofonod, the GNOME Calls system-bus backend (org.ofono).
tests/<Suite>/main.cpp	The seven unit-test suites: Util, Aka, Ipsec, Messages, Engine, Sip, Sdp.
packaging/	systemd units, the bring-up and upgrade scripts, D-Bus and polkit policies, presets, the gschema override, the two APKBUILDs and the CI helpers (§9).
.forgejo/workflows/package.yml	CI: builds the aarch64 apks on every push to main and publishes them to the Forgejo Alpine registry (§9.4).
bin/, build/	Build outputs (crafter-build and make respectively). Ignored.

Also ignored by .gitignore, and never to be committed: *.raw, *.rtp, *.stats, imsreg.state, imsd-*.tar.gz — captures and runtime state carry the subscriber's IMSI/MSISDN and network addresses.

3. Build products

Six products come out of the tree. C++26 modules throughout, import std; in every source but the re-exporting Imsd.cppm, clang + libc++ + lld.

Product	Kind	Built from	Links	Notes
imsd-core	static library	the Imsd module and its seven partitions	—	Pure import std C++, no GLib, no I/O side effects: every message, digest, SA command and call-state decision is here and unit-testable on any dev box without a bus, a modem or a phone.
imsd	executable	implementations/main.cpp	imsd-core, imsd-bus, gio-2.0, pthread	The daemon. Default product.
imsd-bus	static library	interfaces/ImsdBus.cppm	gio-2.0	The polkit gate (net.catcrafts.IMS1.Voice) imsd and imsd-ofonod both link. A translation daemon that runs as root on the system bus reaches imsd as root, which polkit always allows, so it gates its own callers through this or it is a bypass.
imsd-media	executable	implementations/media.cpp	-ldl -lpthread	The RTP/AMR data plane, spawned once per call. No GLib, no core. A separate process for crash isolation and for the far-end-hangup exit-code contract (§7.6). -- --product=media.
imsd-dialerd	executable	implementations/dialerd.cpp	gio-2.0	Plasma Mobile integration: a session daemon owning org.kde.telephony.{CallUtils,DeviceUtils,UssdUtils}, bridging to imsd. GDBus translation only. A separate process because those are per-user session-bus names a root system daemon cannot own. -- --product=dialerd.
imsd-ofonod	executable	implementations/ofonod.cpp	imsd-bus, gio-2.0	GNOME Calls integration: a system daemon owning org.ofono, presenting imsd as an oFono modem. GDBus translation plus the polkit gate on its own callers. -- --product=ofonod.

The rule behind the split: imsd-core stays GLib-free and free of I/O so that every decision in it has a unit test. New protocol logic goes into a partition with a test. The shell (main.cpp) holds protocol decisions no test reaches — some older than 0.3.10, some added by it: the reg-event subscription schedule (§7.4: its retry ladder, Retry-After clamp, Timer F, renewal point and RFC 6665 reasons); the registration sequence and its transactions (AwaitFinal/AwaitInitialFinal: which message is a REGISTER's final, the dispatch of requests arriving meanwhile and the routing of our reg-event SUBSCRIBE's final read there, the 12 s wait restarted on a provisional; Reregister's one re-challenge); the inputs to RegRecovery — SipFlow::Connect's split of failures into local refusals and network silence, and the catch sites that sort a failed refresh (the keepalive's, ReconnectCycle's) and a failed fresh attempt (FreshRecover, DeferBringUp) into Refused, Silent or Throttled with the status, the Retry-After and saReplaced_, the bring-up resume's catch (a refusal's Retry-After fed as a hold, the old registration written off after any failed resume), the OnLink read that writes the old registration off when its address has left the netdev (FreshRecover after a failed move, AddressGone), and PacketServiceUp's read of ModemManager before a silent cycle is counted; the shell's reaction to a NOTIFY terminating our binding (the flow closed at once, or kept under a call and closed when the call ends, a reconnect cycle's or the bring-up resume's wait ended by it — the reducer's verdict is pinned, the reaction is not); and the holds file's codec (PersistHolds/LoadHolds: aging by boot seconds, the pdn/boot match, defaults for absent keys — proven on the phone only, captures 45- and 70- of 2026-09-25-polkit-voice). For the schedule, a reducer next to RegRecovery, with a Subscription-State parser in Imsd:Sip pinned by tests/Sip, is the follow-up that moves it; a pure format/parse pair in Imsd:Engine is the holds file's.

4. Building

4.1 Native, with crafter-build

crafter-build is the Crafter.Build Flatpak. It carries its own clang, lld and libc++, and its SDK (org.freedesktop.Sdk, from Flathub) has the gio-2.0 headers, so the host needs Flatpak and nothing else:

flatpak remote-add --if-not-exists flathub https://dl.flathub.org/repo/flathub.flatpakrepo
flatpak remote-add --if-not-exists catcrafts https://flatpak.catcrafts.net/catcrafts.flatpakrepo
flatpak install catcrafts net.catcrafts.CrafterBuild//stable
mkdir -p ~/.local/bin
printf '#!/bin/sh\nexec flatpak run net.catcrafts.CrafterBuild//stable "$@"\n' > ~/.local/bin/crafter-build
chmod +x ~/.local/bin/crafter-build

crafter-build is a script and not an alias so that the name also resolves in a shell that has not defined the alias (a fresh bash -c, a CI step); ~/.local/bin has to be on PATH (any directory on it will do). The sandbox does not see the host's /tmp: keep the checkout under /home, or grant its directory with flatpak run --filesystem=<dir>.

crafter-build                       # bin/imsd-<target>-<march>-<mtune>-<id>/imsd
crafter-build -- --product=media    # bin/imsd-media-…/imsd-media
crafter-build -- --product=dialerd  # bin/imsd-dialerd-…/imsd-dialerd
crafter-build -- --product=ofonod   # bin/imsd-ofonod-…/imsd-ofonod
crafter-build test                  # the seven unit-test suites
crafter-build lint                  # the house-style rules of lint-rules.h

Output directories under bin/ are named <product>-<target>-<march>-<mtune>-<id>; the ./bin/imsd-*/imsd globs in §8.3 rely on that.

A host-native binary built this way links the Flatpak's libc++ through an rpath into /app/lib: run it inside the sandbox (flatpak run --command=sh net.catcrafts.CrafterBuild//stable, with --socket=session-bus for §8.3's daemons — the sandbox's own session bus is a filter that refuses their names; crafter-build test runs the suites there anyway), or build with make (§4.2) for one that runs on the host. A sysroot build (§4.3) gets no such rpath — it links the sysroot's libc++.

4.2 With make (distro packaging)

GNU make, clang++ with libc++ and the libc++ std module sources (std.cppm: package llvm-runtimes on Alpine, libc++ on Arch; override STD_CPPM if it lives elsewhere), lld, pkg-config and the gio-2.0 headers.

make            # build/make/{imsd,imsd-media,imsd-dialerd,imsd-ofonod}
make check      # the same seven suites
make install    # DESTDIR/PREFIX staged install, including the packaging/ files

The Makefile forces CXX = clang++ (abuild exports CXX=c++, which is gcc and has no --precompile); an explicit make CXX=… still wins. One flag set is used for every translation unit because BMIs are rejected on compiler-option mismatch — per-target extras are limited to -I/-D and -l/-L. From pkg-config gio-2.0 only -I/-D and -l/-L pass through: it also emits -pthread, which would config-mismatch the shared std BMI (project.cpp filters identically; pthread lives in libc on every platform targeted). The BMI file names must stay <module>-<partition>.pcm — that is how clang resolves import :Part; under -fprebuilt-module-path.

make install places: the four binaries (imsd-media under libexec), ims-pdn-up.sh and imsd-handover.sh under libexec, imsd.service and imsd-ofonod.service, imsd-dialerd.desktop in /etc/xdg/autostart, the D-Bus policies (net.catcrafts.IMS1.conf, imsd-ofono.conf), the polkit policy, imsd-ofono-restart-calls.sh, the GNOME Calls gschema override and the 80-imsd-ofono.preset.

4.3 Cross-compiling for a phone (aarch64 Alpine / postmarketOS)

packaging/make-sysroot.sh                  # one-time: Alpine aarch64 sysroot from the CDN (edge)
crafter-build -- --target=aarch64-alpine-linux-musl \
    --sysroot=$HOME/.cache/imsd/sysroot-aarch64-alpine \
    --march=armv8.6-a+fp16fml+aes+sha3+sm4 --mtune=cortex-a720
# `crafter-build test` with the same flags fails: its runner is qemu-aarch64,
# which the Flatpak's sandbox does not have. Test host-native (§4.1).

make-sysroot.sh needs no root, qemu or device: it downloads apk-tools-static and the Alpine keys and populates a minimal rootfs (musl, libc++ with its std module source, glib and their headers, compiler-rt, libunwind, gcc for its crtbeginS.o/libgcc, which clang's *-alpine-linux-musl driver links against). In a cross build project.cpp does not ask the host's pkg-config (it would answer for the wrong architecture); it adds -I=/usr/include/glib-2.0 and -I=/usr/lib/glib-2.0/include, which clang resolves inside the sysroot. crafter-build compiles the std module against the sysroot's libc++ headers from the sysroot's own source — Alpine's llvm-runtimes, the same release as its libc++, which make-sysroot.sh installs (libc++-dev ships none); run over an existing sysroot the script upgrades its packages (apk add --upgrade). Without that source it falls back to the toolchain's source for the same libc++ major release, then to the sources Crafter.Build carries for other releases. This is the flow CI runs (§9.4).

5. Tests

crafter-build test and make check run the same seven suites. Each suite is a plain main() with a Check(bool, message) counter: failures print FAIL: …, success prints <Suite>: all tests passed, and the exit status is the failure count for six suites — non-zero short of a multiple of 256 — and 1 for Engine. Seven all tests passed lines from make check, on every commit of a range (§11), is the project's definition of green.

What the suites pin:

• Util — tokens, IPv6 detection and host/port formatting, hex/base64, MD5.
• Aka — the AKAv1-MD5 digest, identity derivation, the qmicli/mmcli text parsers, the AUTHENTICATE APDU and its response parser.
• Ipsec — the exact ip xfrm argv lists for the SA pairs, the Security-Server mechanism selection, the SA reader.
• Messages — every outgoing SIP message byte-for-byte, cross-generated from the Python reference stack imsd replaced.
• Sip — the text layer's edge cases (empty header values, line anchoring, keepalive discards), ResponseOf, refused finals with reason headers, reginfo documents. A change that flips one of those tests is a behaviour change, not a cleanup.
• Sdp — the offer's exact bytes, the parser, BuildAnswer at the offer's own payload types and octet-align mode, the CODECS override.
• Engine — the call state machine driven through recorded network dialogs (reliable 18x/PRACK, 2xx ACK + media start, far-end hangup, CANCEL/answer races, busy/error finals, the terminating side's 100/180/200/486/487/488, G.711-only and AMR-NB gateway offers, ring timeout, BYE both ways, the emergency chain) and RegRecovery (thresholds, backoffs, the throttle schedule, Retry-After, which waits a Dial may cut short, when the old registration counts as gone, the holds a restart takes over, a binding the network terminated).

Rules:

• A decision in imsd-core gets a test in the suite that owns the partition. Fixtures are recorded network traffic where any exists, inline fixtures only where no recording exists.
• Behaviour that lives in the shell (main.cpp: timers, the reg-event subscription schedule, the audio-session resolution, the hand-over scripts) is proven on a phone where a bench can reach it; the commit message says in one sentence that it was tested, and the arms no bench has reached are named here. The known gaps: the reg-event subscription schedule (the arming and KPN's noresource closure have run on hardware, the 60 s retry only on a pre-fix build that renewed that closure; the retry on this code, the renewal firing, Timer F, the doubling, a SUBSCRIBE Retry-After, the renew arm and the back-off's survival across a refresh have run nowhere — §3, §7.4); a Retry-After on a REGISTER and a Dial bringing a recovery step forward (KPN's refusals, all 403, carry none; imsd-ofonod refuses the Dial itself and imsd-dialerd forwards it — pinned in tests/Engine only); a refused initial or fresh REGISTER (403, 5xx) at bring-up or in recovery (KPN has only throttled or stayed silent — pinned in tests/Engine only); the write-off of the old registration by a recovery's fresh attempt that fails past the SA setup (such attempts are on record only as a bring-up's fatal exit, which does not pass that arm — pinned in tests/Engine only); a refused refresh counted towards the escalation, and the escalation by two of them (KPN refuses a refresh only with the 403 that says the registration is gone — pinned in tests/Engine only); of the throttled-attempt chain in recovery (a throttled fresh attempt, the old SA retried once meanwhile with the stored binding's Contact and refused 403, the deferred attempt accepted at the hold's end — run 2026-10-03 on the series as it then stood) the deferred attempt made by the same process, since a restart inside the hold made it from the holds file instead (the same process made it on 2026-09-24, on the build before the policy's rework); the address moves writing old_gone to the holds file (the move benches predate that field); a SUBSCRIBE final read inside a REGISTER wait (KPN answers within the second); the shell's handling of a NOTIFY that terminates our own binding (§3; every captured termination is a previous contact's O2 deactivated, and a deregistration during a call cannot be staged); SipFlow::Connect's errno arms — socket() failing, a UDP connect() error, a bind() refused while the address is still on the link — which no bench reaches without fault injection (§3); a coverage gap on the air (no bench stages a radio gap without an RF shield) — the packet-service read's rule has run through a fake mmcli only (2026-10-03: searching and detached not counted, connecting with unknown counted), its other states, ModemManager not answering and its second site (a refresh unanswered over a reconnected flow) not at all, and tests/Engine pin nothing of it; the REGISTER wait's diverting arms — a datagram skipped on the init port, a response to another transaction ignored, a provisional restarting the wait, a request (an INVITE among them) dispatched and answered under the wait; an incoming call answered from a session's dialer since the polkit gate — imsd-dialerd's Accept by the active session, or GNOME Calls' Answer through imsd-ofonod's gate (imsd's own Accept gate has run: refused for an account without a seat session and for nobody, accepted for root, 2026-10-04); a refused final carrying reason headers (KPN's 403s carry none — the rendering is pinned in tests/Sip only); an AUDIO_USER pin in imsd's own environment that names no account (the logind fallback) or an account without a PipeWire socket (a silent call) — a pin naming an account with one ran, 2026-10-04. DetectLocal's three-tier address ranking for a run without LOCAL (§10.1) ran through a fake ip (2026-10-05: the phone's listing of the netdev and two cut-down ones).
• imsd-media --selftest round-trips the RFC 4867 payload packing (both formats, both AMR codecs) and the G.711 tables. MIC_SRC=<file> (raw s16 PCM at the codec rate, paced in real time) and PCM_DUMP=1 are test seams for driving the leg against a synthetic RTP peer without a phone.
• imsd --session and imsd-ofonod --session own their names on the session bus for development without root, polkit or a phone (§8.3).

6. Code style and lint

crafter-build lint reports the rules of lint-rules.h; crafter-build format applies the transform rules. The rules, by name:

Rule	Meaning
spdx-header	Line 1 // SPDX-License-Identifier: …, line 2 // SPDX-FileCopyrightText: …, line 3 blank. Line 4 may carry // lint-disable-file <rule> … where a file needs one.
no-tabs	Spaces only.
naming	Types, aliases, functions, statics, namespace-scope globals and constexpr constants are PascalCase; locals and parameters camelCase; one trailing underscore marks a member or shadows a keyword (label_, requires_). Heuristic, report-only.
enum-class	enum class, never a plain enum.
no-iostream-print	std::println (and std::println(std::cerr, …)), never std::cout / << to std::cerr.
no-char-pointer	std::string / std::string_view over char*. C interop stays: argv, getenv/setenv, dlerror, c_str()/.data() call sites, reinterpret_cast, extern "C".
format-concat	std::format instead of + with a string literal; simple single-line chains are rewritten automatically, anything else is reported.
fixed-width-types	std::int32_t and friends instead of short/int/long (transform); lines with main/argc/argv or extern "C" keep C ints. Nearly every source file disables this one on line 4.
single-declaration	One declaration per statement; Type a = x, b = y; is auto-split, declarators with pointers, references, parens or templates are reported.
brace-style	K&R: a { alone on a line after a )/else/do/try header joins the header line. Standalone scope blocks stay.
if-single-line	A single-statement if body joins the if line when the result stays within 250 columns and neither line carries a comment.
wrap-join	Wrapped call arguments and &&/`
paren-spacing	No padding inside parentheses.
trim-trailing-ws	No trailing whitespace.
final-newline	The file ends with a newline: one is appended when it is missing.

Beyond the rules:

• Comments explain constraints the code cannot show — a network's observed behaviour, a spec clause, the reason a shape was chosen — and name their evidence (a dated bench, a capture) when they rest on one. They do not narrate what the code does.
• Log lines are the operator's interface (§7.8). A new state the daemon can be in gets a journal line that names it; existing lines are grepped for by scripts (imsd-handover.sh reads a pre-0.3.10 daemon's bring-up deferred: … next fresh registration in N min), so changing one is an interface change.
• GLib only in main.cpp, dialerd.cpp, ofonod.cpp and ImsdBus.cppm. media.cpp is std + POSIX. The partitions are std only.

7. How the daemon works

7.1 Processes and buses

imsd runs as root on the system bus as net.catcrafts.IMS1 (object /net/catcrafts/IMS1, interface net.catcrafts.IMS1; the frozen ABI, §8). The bus policy packaging/net.catcrafts.IMS1.conf lets any local account reach it; placing, answering and ending a call is polkit's net.catcrafts.IMS1.Voice (packaging/net.catcrafts.IMS1.policy, shaped like ModemManager's Voice action: the active local session and root — not an ssh login, an inactive session or a system service account). Reads (GetStatus, GetCalls) stay open, as ModemManager's are to every local account: the call signals reach them all anyway, the status (the address, the P-CSCF, the phone number) travels in no signal.

Two threads: a dedicated engine thread runs the SIP loop (blocking framed receive on the protected client flow, the protected-port listeners for terminating requests, media reaping, the keepalive refresh); the GLib main loop owns the bus. D-Bus method calls push commands to the engine queue; engine events reach the bus through g_idle_add, where the calls table and the status snapshot live (main thread only).

Per answered call imsd forks imsd-media (IMSD_MEDIA, default next to the imsd binary, else /usr/libexec/imsd-media) with the addresses, ports and payload type as arguments and the codec and audio knobs in its environment (§7.6, §10.2).

The desktop daemons are translation layers: imsd-dialerd runs as the session user (autostarted from /etc/xdg/autostart/imsd-dialerd.desktop in place of plasma-dialer's modem-daemon, whose autostart the package hides through /etc/skel/.config/autostart/org.kde.modem.daemon.desktop); imsd-ofonod runs as root on the system bus (imsd-ofonod.service, Conflicts=ofono.service). Both consume the frozen ABI and add nothing to it.

7.2 Bring-up

imsd.service runs two ExecStartPre= steps before the daemon:

1. /usr/libexec/ims-pdn-up.sh brings the ims PDN up through ModemManager (§7.3) and writes /run/imsd.env with DEV= (the connected netdev) and LOCAL= (the PDN address ModemManager assigned).
2. /usr/libexec/imsd-handover.sh (ExecStartPre=-, failure-tolerant) hands a pre-0.3.10 daemon's throttle wait over (§7.5).

The unit then reads EnvironmentFile=-/run/imsd.env and EnvironmentFile=-/etc/imsd.env (the admin's file wins) and starts /usr/bin/imsd. systemd reads those files anew for every command it spawns, so each ExecStartPre= already sees the values the previous one wrote. TimeoutStartSec=900 covers the bring-up's worst case (a 2-minute modem wait, a 5-minute registration gate, connect retries). Restart=on-failure, RestartSec=120; KillMode=mixed with TimeoutStopSec=10; StateDirectory=imsd (/var/lib/imsd).

The daemon's own bring-up (BringUp() in main.cpp):

1. PCSCF must be set (no P-CSCF discovery from the PDN's PCO yet).
2. qmicli -d qrtr://0 --uim-get-card-status finds the ready USIM (slot, AID); mmcli -m any gives the primary SIM path and the IMEI (for the +sip.instance URN); mmcli -i <sim> gives IMSI and MCC/MNC, from which the IMPI/IMPU/realm are derived. mmcli --location-get fills P-Access-Network-Info.
3. Warm resume when an SA pair is already in the kernel and the state file (STATE_FILE, default /var/lib/imsd/imsreg.state) describes the registration: reconnect through the existing SA and send a refresh re-REGISTER (RESUME via existing SA, then REGISTERED (resumed + true-refreshed)). This avoids the network's fresh-SA throttle. RESUME=0 forces a fresh registration. A resume the network refuses is not fatal: the fresh registration replaces its SAs.
4. Fresh registration otherwise (FRESH registration): an unprotected REGISTER on PCSCF_PORT (UDP, always), the 401 with the AKA challenge and the Security-Server list, the AKA run over a UIM logical channel (--uim-open-logical-channel, --uim-send-apdu), the SA pair installed with ip xfrm, the protected REGISTER over the negotiated transport (§10.1, SIP_TRANSPORT), REGISTERED (fresh). Then the reg-event SUBSCRIBE (§7.4).
5. A keepalive re-REGISTER refresh at half the granted lifetime, within 120–1800 s (REFRESH_INTERVAL), only while idle.

The state file is JSON: callid, ftag, cseq, spi_uc, spi_us, expiry, route, ppi, aor, contact_user, transport.

A failed fresh bring-up exits non-zero and systemd retries after RestartSec — except a bring-up the network refused or throttled, which waits in process on the refusal schedule (§7.4) with nothing to reconnect over, then tries again (bring-up deferred: …). A registered daemon whose address leaves the netdev with no PDN address there to move to also exits (engine fatal: … is no longer on qmapmux0.0 — exiting for systemd restart) — not at once: the loss is noticed at the next recovery step, the refresh (every 1800 s on KPN's 7200 s grant), whose re-REGISTER gets no reply and whose reconnect cannot bind the address (dev phone 2026-10-02, the ims bearer disconnected under a registered daemon: 14 min from the disconnect to the exit). After RestartSec (120 s) ims-pdn-up.sh runs again and imsd registers on the PDN's address (the same bench: a new prefix, REGISTERED (fresh) six seconds into the new start).

7.3 The ims PDN (packaging/ims-pdn-up.sh)

Finds or creates the ims bearer through ModemManager, connects it and configures the muxed netdev. Idempotent; a non-zero exit fails the unit.

• Waits up to 120 s for a modem, then gates the connect attempts on network registration (IMS_REG_TIMEOUT, default 300 s): some carriers attach ~2 min after boot.
• Connects by 3GPP profile index (IMS_PROFILE_ID, default: looked up by APN in qmicli --wds-get-profile-list=3gpp), not by APN string: a profile-indexed request is exempt from the modem's attach-family forcing that refuses an APN-string IPv6 request when the attach PDN was granted IPv4-only (Odido, O2 UK, Swisscom). An empty profile list is the modem still coming up; a list without the APN is final only once the modem is registered (the list can be partial while it enables). A leftover APN-string bearer is never reused and is deleted when connecting by index.
• Sets accept_ra_defrtr=0 on the netdev before link-up: the PDN's router advertisement must never make the ims PDN the phone's IPv6 default route (on IPv4-only wifi every AAAA-first client would send its SYNs into the IMS walled garden and hang). The RA's prefix and MTU still apply. An RA default route already present (an imsd restart) is flushed.
• Sets the PDN MTU ModemManager reports on the link (1280 on the FP6), adds the address, waits out DAD, and installs a host route to PCSCF (dev <netdev>, no gateway — a raw-IP netdev without header_ops). The PDN is IPv6-only, so PCSCF must be an IPv6 address; anything else on the IMS network (its DNS servers, a traceroute target) needs its own host route (ip -6 route add <addr> dev qmapmux0.0). imsd installs a host route per media peer itself.
• Opens imsd's protected ports 45061–45062 (TCP and UDP) on qmapmux* in nftables when a inet filter table exists (pmOS's default INPUT chain drops inbound on qmapmux*, which silently killed every network-initiated request after ESP decapsulation). Best-effort.
• Writes /run/imsd.env: DEV=<netdev>, LOCAL=<PDN address>. imsd registers on the address the network assigned, not on the kernel's temporary SLAAC address from the RA, which the netdev lists first and retires after about two days (the SAs and the Contact would go with it).

Its own settings (read from the environment, else from /etc/imsd.env for manual runs): IMS_APN (default ims), IMS_IP_TYPE (ipv6), IMS_PROFILE_ID (empty = look up; none = connect by APN string), IMS_REG_TIMEOUT (300), PCSCF.

7.4 Registration recovery (RegRecovery, Imsd-Engine.cppm)

What the daemon does when the registration stops working after bring-up, as a pure reducer the shell feeds with the clock and the network's answers. Two kinds of failure reach it: a refusal (the network answered a refresh or a fresh REGISTER with a final other than 200/401) and silence (the flow died and reconnecting through the SA, or the refresh over it, got no answer). Neither is retried for long on the same registration (TS 24.229 5.1.1.4 and RFC 5626 have the UE register anew). Before this reducer existed the daemon looped reconnect + re-REGISTER on one Call-ID and SA forever (O2 UK, 2026-09-24: 21 × 503 over 70 min, then 33 unanswered reconnect cycles over 2 h 39 min).

The policy, with its constants:

Step	Rule
Reconnect	Through the existing SA, then refresh. Back-off 5 s → 5 min (ReconnectDelayMin/Max).
Escalate to a fresh registration	After two refused refreshes (RefusalsBeforeFresh) or two reconnect cycles that end without an answer (SilentCyclesBeforeFresh) while the modem reports packet service (PacketServiceUp: ModemManager's registration and packet-service state, as ims-pdn-up.sh reads them). A cycle that fails during a coverage gap is the phone's silence, not the network's: not counted, retried on the local-refusal pace, so a radio gap across a refresh does not escalate into a fresh registration, which KPN refuses while the registration is live and drops it for (§13). New Call-ID, new challenge, new SA pair (registering fresh (recovery attempt N)).
A refused or throttled fresh attempt	Waits on the throttle schedule: 21 min, growing ×1.5 to 60 (ThrottleMinutesMin/Max). KPN refuses a fresh SA pair on an address whose registration is live (§13), and drops that registration the moment an initial REGISTER arrives.
A silent fresh attempt	Backs off 30 s → 10 min (FreshDelayMin/Max).
Retry-After	Always wins over a shorter wait, honoured up to an hour (RetryAfterMax, the schedule's longest wait); a longer one is cut to an hour and the refusal heard again then. On a refused fresh attempt it replaces the schedule's wait, shorter or longer, never below 30 s (FreshDelayMin).
A 403	A refusal like the others: never hammered (the schedule), never abandoned (a SIM that is unbarred registers within the hour).
The old registration is gone	A 403 once a fresh registration is due, a fresh attempt that got past the SA setup, a binding the network terminated (reg-event), an older address that left the netdev, or a bring-up whose resume failed: no reconnect over the old SA from then on. Otherwise the existing SA is still retried on the reconnect back-off while a fresh registration is deferred.
A Dial while unregistered	Brings the next recovery step forward (the reconnect, or the fresh attempt once it is due) — never a wait the network imposed (a Retry-After, or the schedule after a refused or throttled fresh attempt). imsd-ofonod refuses a Dial then and imsd-dialerd lists no modem.
Success	Resets everything.

The network's waits are holds, and a restart of imsd (an upgrade restarts it) does not cut them short: PersistHolds writes them to the holds file (HOLDS_FILE, default /run/imsd.holds) as JSON — pdn (the PDN's own address), boot (the boot id), written_at (seconds of uptime), hold, fresh_hold, throttle_minutes (the schedule's place), old_gone (the old registration is gone: a 403 once a fresh registration is due, an attempt past the SA setup, a binding the network terminated, an older address that left the netdev, and every bring-up that goes on to register fresh — its resume failed or there was nothing to resume) — and LoadHolds takes them over at the next start for the same pdn and boot id, waiting them out before the resume (a refresh's Retry-After) or before the fresh registration (a fresh attempt's schedule or Retry-After, a terminated binding's wait); with old_gone set the start does not resume over the old SAs at all, it waits the fresh hold out and registers fresh — also after a start during an outage, whose resume and fresh attempt both fail without an answer: the next start then registers fresh while the network still holds the old registration, which KPN refuses (§13; dev phone 2026-10-04: 21 min where 0.3.9's retried resume would have recovered at once). A file without the key reads as not gone; the 0.3.9 hand-over (imsd-handover.sh) writes the key as true, since the wait it hands over follows a throttled initial REGISTER, at which KPN drops the old registration (§13). A reboot or another PDN address starts clean. The schedule's place is kept even after the holds run out, so a restart does not start it over at 21 min. When nothing is held the file is removed — when it is a regular file; /dev/null switches the knob off and anything that is not a regular file is emptied, never unlinked. The recovery policy's waits and the holds are measured on the boot clock (CLOCK_BOOTTIME), so a suspend counts; the keepalive refresh gate, the CRLF keepalive and the reg-event retry and renewal timers run on the steady clock and count awake seconds only.

The reg-event subscription (RFC 3680; the network's own view of the binding) is one live dialog per registration, subscribed anew ahead of the lifetime the S-CSCF granted. Refused or unanswered, it is retried after 60 s doubling to 10 min (a Retry-After honoured up to an hour; a registration refresh neither brings a scheduled retry forward nor starts its back-off over — the back-off resets when a subscription starts afresh or is accepted). When the S-CSCF ends it for a reason that allows renewal (RFC 6665: deactivated, timeout, giveup, probation) it is renewed; after any other reason — noresource, rejected, a reason-less end — the next registration refresh subscribes anew. An earlier subscription's NOTIFY is still read for the binding's state, but its end is not ours to renew (KPN closes a registration's previous subscription with noresource when a new one replaces it). A NOTIFY that terminates the binding triggers a fresh registration — at once, or after the network's retry-after (up to an hour); after the call, when one is up (one exception: a REGISTER wait that still gets its 200 after such a NOTIFY, a call having kept the flow, leaves that registration standing). After rejected and unregistered it waits on the refusal schedule, a wait no Dial cuts short: the binding is gone, so nothing is retried meanwhile. One termination counts once, however many NOTIFYs report it (a repeated probation report may extend its hold from its own retry-after). The schedule is shell code in main.cpp, not a reducer (§3); its hardware coverage per arm is in §5.

A registration resumed on an older address (a pre-0.3.10 temporary one) moves to the PDN's own address in place: with its next fresh registration, or when the older address leaves the netdev first, which takes that registration with it.

7.5 Upgrades and the 0.3.9 hand-over

An apk upgrade (or an apk add of a package whose daemon an apk del left running) restarts imsd and imsd-ofonod once the transaction is done: the packages' post-upgrade/post-install scripts mark the units needs-restart (systemctl set-property … Markers=+needs-restart, after a daemon-reload when the unit is not-found because its file was just reinstalled) and pmOS's systemd trigger runs enqueue-marked. A call in progress ends. The restart resumes the registration over its existing SAs, or goes on waiting out a hold the network had set (§7.4). A stopped unit keeps no marker and enqueue-marked leaves it stopped (dev phone, systemd 262~rc3, 2026-10-03).

A daemon older than 0.3.10 kept its bring-up throttle wait in memory only, so the restart registered fresh at once instead of waiting the schedule out. For that one hop: imsd.post-upgrade records the running daemon's InvocationID in /run/imsd.handover (when no holds file exists); at the next start imsd-handover.sh reads that finished invocation's last bring-up line from the journal and, when it is the throttle's (bring-up deferred: fresh-SA throttle active (spi-s=0) — … next fresh registration in N min; the old daemon's other deferrals, after a 401 it could not use, are not handed over), ages it on the monotonic clock (__MONOTONIC_TIMESTAMP against /proc/timer_list; the phone's wall clock can read 1970 until its first NTP sync, and the monotonic clock stops in a suspend, so the wait can only come out long, never short of the network's window), and writes what is left to the holds file as 0.3.10 keeps it — for the address this start registers on when that is the address the wait was earned on (the old daemon logged its LOCAL= once at start); on another address — the normal hop, 0.3.9 on the kernel's temporary address and 0.3.10 on the PDN's own, which holds no registration (§13) — only the verdict that the old registration is gone is written and the new start registers fresh at once (dev phone 2026-10-03: accepted, registered 16 s after 0.3.9's refused attempt) — LOCAL as systemd hands it to the unit's commands (the /etc/imsd.env pin if there is one, else what ims-pdn-up.sh just wrote), unquoted the way imsd itself gets it. Reading at the start rather than at the upgrade means a wait that ended in between — the old daemon making another attempt — is read as it ended. When the old address cannot be read the wait is handed over anyway; when the wait cannot be timed, or this start has no LOCAL, the journal says it was not handed over.

7.6 Calls and the media plane

CallMachine owns one call's SIP dialog, outgoing or incoming, and never touches a socket, a clock or a subprocess: each event returns Actions for the shell (send this on the client flow, answer that request on the channel it came in on, start/stop the media leg, emit this D-Bus state change, arm this deadline). States and reasons are the frozen D-Bus vocabulary: dialing / ringing / incoming / active / terminated, with reasons outgoing / incoming / accepted / local-hangup / remote-hangup / refused-or-busy / error.

• Outgoing: INVITE with the SDP offer (AMR-WB + AMR + telephone-event by default; CODECS restricts and orders; PRECOND=1 adds IR.92 preconditions), reliable 18x with PRACK, 2xx ACK and media start, CANCEL before answer, BYE after. Busy and error finals end the call with refused-or-busy or error.
• Incoming: an INVITE on a protected-port listener is validated before it is announced to the UI; 100 and 180 (reliable when the caller requires 100rel); Accept sends the 200 with the SDP answer at the offer's own payload types and octet-align mode; a remote CANCEL gets 200 + 487; an unusable offer 488 naming what was offered; ring timeout 480. A landline gateway's G.711-only or AMR-NB offer rings and is answered at its own payload types.
• Emergency: a number IsEmergency classifies (112, 911, plus EMERGENCY_NUMBERS; SIM EF_ECC is not read yet) is tried as urn:service:sos first, with one fallback to a plain INVITE of the digits; a plain INVITE answered 380 Alternative Service with an emergency body is re-attempted as urn:service:sos.
• SendDtmf is a stub (RFC 4733 not implemented).
• Incoming calls reach imsd only when the network's T-ADS routes the call to the IMS domain; the REGISTER Contact advertises the MMTEL ICSI and +sip.instance for that. When T-ADS still picks CS, no INVITE arrives — a network/modem-integration matter, not a daemon defect.

imsd-media is one process per call: imsd-media <local-ip> <rtp-port> <remote-ip> <remote-port> <pt> <secs> <out-base>. It binds the advertised RTP port (RTP_PORT, default 50004), sends uplink frames from pw-record through the encoder, captures the downlink, and with PLAY=1 reconstructs the media clock from RTP timestamps so pw-play stays real-time-paced through far-end DTX silence. Codecs: AMR-WB (16 kHz, the default), AMR narrowband and G.711 PCMA/PCMU (8 kHz, what a PSTN gateway offers); AMR frames ride RFC 4867 payloads, octet-aligned or bandwidth-efficient (OCTET_ALIGN, mirrored from the SDP). The AMR codecs are dlopen'd (libvo-amrwbenc + libopencore-amrwb for WB, libopencore-amrnb for NB); G.711 is a table. Exit code 3 means the downlink dried up for MEDIA_TIMEOUT seconds (default 6.0) — the far-end-hangup signal, which on carriers whose BYE never reaches our SAs is the reliable teardown trigger. Per-call stats land in OUT_DIR (default the state dir); RTP_DUMP=1 captures the raw downlink next to them.

Audio session. Call audio goes through the PipeWire of one account. imsd resolves it for each call from logind: the user session active on seat0 (loginctl show-seat seat0; a greeter does not count) when it has a /run/user/<uid>/pipewire-0 socket, and passes it to imsd-media as AUDIO_USER. AUDIO_USER set in imsd's own environment pins an account instead; one that is not an account falls back to logind. imsd as packaged (root, on the system bus) logs the resolution at start and when a call's media starts (audio session: …), imsd-media once per call. An imsd-media started without the variable at all (by hand, or by an imsd older than 0.3.10 while an upgrade replaces it) tries the account user, its old default.

7.7 Runtime files

Path	Written by	Content
/etc/imsd.env	the admin	configuration (§10); PCSCF= is required. The apk adds a drop-in with ConditionPathExists=/etc/imsd.env (§9.2), so an unconfigured phone does not boot into a failing unit
/run/imsd.env	ims-pdn-up.sh	DEV=, LOCAL= of the connected PDN
/run/imsd.holds (HOLDS_FILE)	imsd, imsd-handover.sh	the network's holds and the schedule's place (§7.4)
/run/imsd.handover	imsd.post-upgrade	the InvocationID of the daemon an upgrade replaces, written when no holds file exists (§7.5); consumed by imsd-handover.sh
/run/imsd-ofonod.started	imsd-ofono-restart-calls.sh	marker: imsd-ofonod has started once since boot
/var/lib/imsd/imsreg.state (STATE_FILE)	imsd	the registration context for a warm resume
/var/lib/imsd/*.stats, *.rtp, *.raw	imsd, imsd-media	per-call media stats, raw RTP (RTP_DUMP), SIP dumps (DUMP_SIP; mode 0600 — they carry the IMSI/MSISDN)
$XDG_STATE_HOME/imsd/ (else ~/.local/state/imsd/), $XDG_RUNTIME_DIR/imsd.holds (else /tmp/imsd.holds)	imsd	the same files for a non-root (--session) run

7.8 Journal vocabulary

Lines the operator (and the scripts) look for, all prefixed imsd: :

• LOCAL=… P-CSCF=…, SIP transport: …, SIM slot=… IMSI=… domain=… at start.
• RESUME via existing SA (cseq N), REGISTERED (resumed + true-refreshed), FRESH registration, Security-Server: …, REGISTERED (fresh).
• bring-up deferred: …; next: fresh registration in N s — one line; in N min from a minute (the pre-0.3.10 form bring-up deferred: … next fresh registration in N min is what imsd-handover.sh reads from an older daemon's journal), a hold the network set before this start stands (…), the refusal schedule stands at N min from before this start: ….
• …; next: fresh registration in N s (in N min from a minute, now), registering fresh (recovery attempt N), fresh registration deferred/refused/failed: …, reconnected + re-registered, recovered by a fresh registration.
• the registration's SAs are on X, not the PDN's own address Y: resuming there until the next fresh registration, the fresh registration moves from X to the PDN's own address Y, back on X: the old registration stands until the next fresh attempt, X has left DEV: the registration on it is gone; staying on Y; next: …, X is no longer on DEV: the registration on it is gone; on the PDN's own address Y now; next: ….
• engine fatal: … — exiting for systemd restart.
• reg-event SUBSCRIBE sent, and the binding's state from NOTIFY.
• audio session: … at start and at each call's media start; CODECS override active: ….
• A refused REGISTER or SUBSCRIBE is logged with its status line and any Retry-After / Warning / Reason / Server headers.
• connect: no answer from the P-CSCF N times (…) when the protected connect series ends unanswered.

From the scripts: ims-pdn-up: …, imsd-handover: …, imsd-ofono-restart-calls: ….

8. D-Bus ABI and desktop integration

8.1 net.catcrafts.IMS1 (frozen)

Object /net/catcrafts/IMS1, interface net.catcrafts.IMS1. The ABI is frozen — the two translation daemons depend on it, and a new desktop needs a new translation daemon, not a change here.

Member	Signature
Dial(number)	s → s (callUni)
HangUp(callUni)	s
Accept(callUni)	s
SendDtmf(callUni, tones)	ss
GetCalls()	→ aa{sv}
GetStatus()	→ a{sv}: registered (b), local (s), pcscf (s), expiry (x), cseq (x), ppi (s)
CallAdded	s a{sv}
CallStateChanged	s s s (callUni, state, reason)
CallDeleted	s
RegistrationChanged	b

Dial, HangUp, Accept and SendDtmf are gated by polkit (§7.1); a refused caller gets org.freedesktop.DBus.Error.AccessDenied, and polkit not answering is logged with the sender. A translation daemon that runs as root on the system bus must gate its own callers through imsd-bus, or it is a bypass of net.catcrafts.IMS1.Voice.

8.2 Plasma Mobile (imsd-dialerd)

A drop-in for plasma-dialer's modem-daemon, owning the same session-bus names and objects (org.kde.telephony.CallUtils at /org/kde/telephony/CallUtils/tel/mm, likewise DeviceUtils and UssdUtils; the /tel/mm suffix is hard-coded in plasma-dialer's QML plugin and kde-telephony-daemon — keep it). plasma-dialer, kde-telephony-daemon and spacebar run unmodified. ABI details verified against plasma-dialer 6.7.3 are in the header of implementations/dialerd.cpp (CallData marshalled as a struct wrapping a{sv}, struct-wrapped int32 enums in MMCallState numbering, an empty callUni meaning the active call, callsChanged with the full vector on every add/delete). It lists no modem while imsd is unregistered.

8.3 GNOME Calls, Phosh, GNOME Mobile (imsd-ofonod)

Presents imsd as an oFono modem: org.ofono with a Manager at /, one Modem + VoiceCallManager at /imsd, and a VoiceCall object per live call — what GNOME Calls' bundled ofono provider plugin drives; Calls, Phosh and GNOME Shell run unmodified. org.ofono is the seam because it is the only one a third party can implement: org.gnome.Calls.Call is what Calls exports so a shell can observe and control a call that already exists (Accept, Hangup, SendDtmf, Silence — no Dial), and Phosh consumes it from Calls — its call UI needs nothing extra once Calls has a working origin; Calls' own backends are libpeas provider plugins (mm, ofono, sip, dummy) against private headers no distro installs. Consumer-shaped details verified against calls 50.0 are in the header of implementations/ofonod.cpp. Verified on a Fairphone 6 (postmarketOS, dbus-broker) with GNOME Calls 50.0: outgoing and incoming calls with audio both ways, answered and hung up through org.gnome.Calls.Call — the surface Phosh drives. The answered calls predate the polkit gate (§5).

Setup: apk add imsd-ofono enables imsd-ofonod.service by preset and ships a gschema override setting org.gnome.Calls autoload-plugins to ['ofono'] (the per-user equivalent is gsettings set org.gnome.Calls autoload-plugins "['ofono']"); a hand install (make install) enables the unit itself with systemctl enable --now imsd-ofonod (it is a system service: org.ofono is a system-bus name) and compiles the schema override. Drop mm rather than adding ofono alongside it: the ModemManager provider would offer the modem's CS voice path as a second origin, and on a phone whose voice path is imsd that origin carries no audio. Never run it beside a real ofonod (one name, one owner; the unit has Conflicts=ofono.service and the daemon exits if it loses the name). Running imsd-dialerd at the same time is fine (different bus, different consumer). One dbus-broker detail is load-bearing and lives in packaging/org.ofono.conf: dbus-broker checks a broadcast against the sender's send policy for every name the receiver owns, so root (imsd) must be allowed send_destination="org.ofono" or imsd's call signals never reach the daemon.

Known gaps, all inherited rather than introduced:

• USSD is refused with org.ofono.Error.NotSupported and not advertised in the modem's Interfaces: the IMS stack has no USSD path.
• No hold, multiparty, transfer or call waiting (org.ofono.Error.NotImplemented): imsd is a single-call stack.
• Per-call caller-ID withholding is refused rather than silently ignored: imsd cannot honour a CLIR request, and failing is safer than dialling with the caller ID exposed.
• Phosh's emergency-call screen lists nothing: imsd-ofonod publishes org.ofono.VoiceCallManager.EmergencyNumbers (112, 911, plus EMERGENCY_NUMBERS), oFono's standard place for it, but Calls' ofono provider never reads it: it makes no GetProperties call on the VoiceCallManager and returns NULL for the origin's emergency-numbers, which is what org.gnome.Calls.EmergencyCalls.GetEmergencyContacts is built from (the ModemManager provider fills its equivalent via mm_sim_dup_emergency_numbers()). An upstream fix would close this. Dialling an emergency number from the dialpad is unaffected — that reaches imsd's own classifier.
• DTMF is forwarded to imsd, where SendDtmf is a stub — the same limitation Plasma has.
• Restarting imsd-ofonod restarts GNOME Calls with it: when the modem's VoiceCallManager interface goes away and comes back, Calls 50.0 adds a new origin but leaves the old origin's CallAdded handler connected, so after one such cycle every call is added twice, and after a few the stale handler runs on freed memory and Calls dies with SIGBUS in g_hash_table_lookup (measured on the FP6). Calls-side; an upstream fix belongs in plugins/provider/ofono/calls-ofono-provider.c. To keep imsd's own restarts and registration drops from triggering it, the VoiceCallManager interface is listed permanently (Online tracks registration; Dial fails with "imsd is not registered" / "imsd is not running"), and only this daemon's own restart cycles the origin — after which Calls dials nothing until it restarts, so the unit's ExecStartPost (imsd-ofono-restart-calls.sh) restarts the Calls daemon of every user running one. The first start since boot leaves a running Calls alone.

Development without a phone or root (crafter-build's binaries inside the sandbox, the make build's build/make/imsd and build/make/imsd-ofonod on the host: §4.1):

./bin/imsd-*/imsd --session &            # imsd's ABI on the session bus
./bin/imsd-ofonod-*/imsd-ofonod --session
busctl --user call org.ofono / org.ofono.Manager GetModems

9. Packaging, CI and releases

9.1 The two APKBUILDs

• packaging/APKBUILD.binary is the packaging since 2026-09-02: it wraps a crafter-build binary cross-compiled per §4.3 (bundled by packaging/make-bin-tarball.sh together with the units, scripts and policies) into the apks CI publishes. pkgver is taken from the Version constant in implementations/main.cpp by build-package.sh. Subpackages: imsd-ofono (the GNOME Calls backend, opt-in) and imsd-systemd (the unit files; install_if systemd — ordered after imsd-ofono because systemd() amoves all of usr/lib/systemd/system).
• packaging/APKBUILD is the from-source route through the Makefile (make, make check, make install) for distros that build from source. It is not the binary route's equal: no imsd-systemd subpackage and none of what §9.2 lists for the apk (imsd's preset, the enable link, the condition drop-in, the /etc/skel override), no libc++ in depends; only the imsd-ofono file list matches. Its pkgver is not bumped per release (0.3.0) and its source= expects a v$pkgver tag archive, which the repository has no tags for.

Both declare provides="81voltd=$pkgver-r$pkgrel": it satisfies soc-qcom-modem's dependency and excludes the real package, because 81voltd serves the modem's own ims-PDN requests, races imsd for the PDN and flaps it with a new prefix every ~2.5 min — two IMS stacks cannot share one PDN. depends lists modemmanager, the AMR codec libraries, pipewire-tools and polkit (the gate fails closed without it). There is no OpenRC service: the unit's sequencing is only tested under systemd.

9.2 What the package installs and enables

imsd.service is enabled by preset (80-imsd.preset, plus the multi-user.target.wants link) and gated by a drop-in ConditionPathExists=/etc/imsd.env, so VoLTE survives reboots without a manual systemctl enable and an unconfigured phone does not boot into a failing unit. imsd-ofonod.service is enabled the same way by imsd-ofono. All of that is the apk's doing (APKBUILD.binary's package()): make install places the unit files and 80-imsd-ofono.preset only, so a hand install runs systemctl enable imsd (and imsd-ofonod) itself and gets no /etc/imsd.env condition. The main package hides kde-telephony's modem-daemon autostart for accounts created after it is installed (/etc/skel/.config/autostart/org.kde.modem.daemon.desktop) because imsd-dialerd owns those names.

9.3 Install scripts

imsd.post-upgrade, imsd-ofono.post-upgrade and imsd-systemd.post-upgrade mark their units needs-restart (§7.5); imsd.post-upgrade also records the old invocation for the 0.3.9 hand-over. Each *.post-install is a symlink to its post-upgrade: apk del leaves the daemon running, so a later apk add is an upgrade for that daemon and apk runs post-install for it. A first install finds no unit active and marks nothing. imsd-systemd marks imsd.service too, since it ships the unit file and apk installs it after imsd.

9.4 CI and what a push means

.forgejo/workflows/package.yml runs on every push to main (and on dispatch): on the flatpak runner label (a privileged runner registered to this repository — bubblewrap inside the job container needs the privilege), in an alpine:edge container, packaging/build-package.sh installs the Crafter.Build Flatpak (net.catcrafts.CrafterBuild//stable from flatpak.catcrafts.net — the branch Crafter.Build publishes from its release tags, where beta follows every push to its master; the build log names its commit) and llvm/abuild, builds the sysroot, cross-compiles the four products, runs the suite natively inside the Flatpak, wraps the result with APKBUILD.binary, and the publish step uploads the apks to the Forgejo Alpine registry (…/api/packages/Catcrafts/alpine/edge/fp6) with PACKAGE_TOKEN. The registry answers 409 for an already-published version and the step treats that as "nothing to do", so a push releases exactly when the Version constant changes. This is the only producer of the imsd apk: fp6-img images install the published package from the registry, and installed phones upgrade with plain apk upgrade. A push to main is a release to real users' phones. A release is a range of commits ending in a bump commit titled imsd X.Y.Z that changes only the Version constant.

10. Configuration reference

Everything is environment variables. The packaged unit reads /run/imsd.env (from ims-pdn-up.sh) and then /etc/imsd.env (the user's, wins on conflict). The variables are user documentation: the tables and the minimum /etc/imsd.env are in the README.

10.1 imsd

The README's first table. The protected client/server ports are fixed at 45061/45062 (imsd::util::PortUc/PortUs) — changing them in source also requires updating the firewall rules ims-pdn-up.sh installs.

10.2 imsd-media (per call, set through imsd's environment)

The README's second table. Two pairs are not configuration and are left out there:

Variable	Default	Meaning
CODEC, OCTET_ALIGN	(from the SDP)	set by imsd from the negotiated answer; not configuration
MIC_SRC, PCM_DUMP	(unset)	test seams (§5)

10.3 ims-pdn-up.sh and imsd-ofonod

IMS_APN, IMS_IP_TYPE, IMS_PROFILE_ID, IMS_REG_TIMEOUT and PCSCF for the bring-up script (§7.3). imsd-ofonod reads EMERGENCY_NUMBERS (from /etc/imsd.env through its unit) and IMSD_BUS=session|system to override only the imsd side of its bus choice.

11. Making changes

• Commit messages. Subject area: what changes — the area is the module partition, program, script or packaging/ci/tests/README the change lives in (several joined by commas), the rest a short lowercase clause with no trailing period, imperative or declarative. The body says why — the field incident or the spec clause — and, where the change alters behaviour, in one sentence how it was tested. A version bump is a commit titled imsd X.Y.Z that changes only the Version constant and has no body.
• No AI attribution trailers. Commits carry no Assisted-by:, Co-Authored-By: or similar lines, whoever or whatever drafted them.
• Signed commits. Every commit is GPG-signed with the repository's configured identity (git config user.signingkey, commit.gpgsign). Do not override the identity from the environment.
• One change, one commit; a fix goes into the commit that introduced the problem while a range is unpublished (rebase), never as a follow-up on top. Every commit of a range builds and passes the seven suites on its own.
• Keep project.cpp and the Makefile in sync, and the two APKBUILDs' file lists with make install, make-bin-tarball.sh and APKBUILD.binary's package() when a packaged file is added.
• The README and this file follow the code in the same commit. A new knob gets its row in the README's configuration tables; a new state its journal line in §7.8; a new file under /run or /var/lib its row in §7.7.
• Compatibility notes are kept where the mechanism lives, not in a changelog the repository does not have: the 0.3.9 hand-over is documented in §7.5 because imsd.post-upgrade ships in every later package and the path stays live for any direct upgrade from an older daemon.
• Never commit captures or state (*.raw, *.rtp, *.stats, imsreg.state): they carry the subscriber's identity.

12. Security considerations

• imsd runs as root (xfrm, qmicli). Its attack surface on the bus is the frozen ABI; the writes are polkit-gated (§7.1, §8.1). Do not add an ungated write member, and do not add a root translation daemon that forwards calls without gating its own callers through imsd-bus.
• The bus policies deliberately let any local account reach both names; authorization is polkit's, not the policy file's. Keep it that way: a policy that names an account breaks the moment the account is called something else.
• SIP dumps and the state file carry the IMSI, the MSISDN, SPIs and addresses. Dumps are mode 0600 under the state dir, off by default (DUMP_SIP=0), and never leave the phone in a commit.
• The ims PDN is a walled garden: ims-pdn-up.sh keeps it from becoming the default route and gives the P-CSCF a host route; imsd adds one per call for the media peer (§7.3). Nothing else is routed over it. A change that routes anything else over it needs a reason and a bench.
• The fixed protected ports (45061/45062) are opened in nftables for qmapmux* only, by the bring-up script.

13. Carrier and platform facts the code relies on

Observed on real networks and encoded in the policy; cite them when touching the related code.

• KPN's fresh-SA throttle — the bring-up deferred: fresh-SA throttle active (spi-s=0) case — refuses a fresh SA pair on an address while the registration on that address is live, whatever its age or last refresh: refused 11 s, 23 min and 2 h 58 min into a registration, 4 and 6.6 min after its last refresh (2026-09-19, -20, -24, 2026-10-03). KPN drops that registration the moment the initial REGISTER arrives, throttled or not, and with it gone accepts a fresh pair there: 5 and 21 min after the throttled attempt (2026-10-03). An address that holds no registration is accepted while another address's is live (2026-09-26, 2026-10-03), and a new prefix's PDN address was accepted 15 s after a throttled attempt on the temporary one (the 0.3.9 → 0.3.10 hop, 2026-10-03). An address whose registration another address's had replaced was refused 26 s after, accepted 141 s and 10 min after (2026-10-03): how soon KPN accepts where a registration has just gone is not measured more closely. The schedule's 21 min is the wait that has never been refused, not a measured minimum; imsd resumes rather than registers fresh wherever it can, since on a live registration's address the attempt is refused and costs the registration.
• O2 UK, 2026-09-24: a refresh refused 21 × 503 over 70 min, then 33 unanswered reconnect cycles; a fresh registration was accepted in one second. The origin of RegRecovery.
• KPN closes a registration's previous reg-event subscription with noresource when a new one replaces it: that end is not renewed.
• Modem attach-family forcing (Odido, O2 UK, Swisscom): an APN-string IPv6 bearer request is refused when the attach PDN was granted IPv4-only; a profile-indexed request is not.
• pmOS's default nftables drops inbound on qmapmux*; without the protected-port rule every network-initiated request (NOTIFY, MT INVITE) dies after ESP decapsulation and MT calls fall back to CS.
• The kernel's temporary SLAAC address on the ims netdev is listed first and retired after about two days; a registration bound to it dies with it.
• systemd reads EnvironmentFile= per spawned command (systemd 262~rc3 on the FP6, 2026-10-03: an ExecStart saw what its ExecStartPre had just written), and unquotes a quoted value — which is why the hand-over script takes LOCAL from its environment rather than parsing the files itself.
• GNOME Calls 50.0 crashes after an oFono origin withdraw/re-add cycle and dials nothing after org.ofono restarts until it restarts itself.
• dbus-broker checks broadcasts against the sender's send policy for every name the receiver owns (the org.ofono.conf detail).
• The phone's wall clock reads 1970 until the first NTP sync; anything that ages a journal line uses the monotonic or boot clock.