- C++ 93.2%
- Shell 6.8%
| Filename | Latest commit message | Latest commit date |
|---|---|---|
Jorijn van der Graaf
40a960f749
A resume compared PCSCF= against the kernel's SAs and, when they did not match, registered fresh without a word — a second initial REGISTER from an address whose registration is live; on KPN a fresh pair to the same P-CSCF meets the 21-minute refusal that costs the live registration (§13), what another P-CSCF does with it is unmeasured. The registration was made to whatever P-CSCF the SAs name (the SA setup takes imsd's previous pair out first), so that is where a resume belongs: SaPeer reads it from the dir-out transport policies — the one address a reqid-1 and a reqid-2 policy both name, each with imsd's fixed protected port as its selector's sport (reqid and mode alone are anyone's): the state text cannot tell the UE from the P-CSCF, a lone policy is not ours and a VPN's beside the pair changes nothing — TryResume resumes there, routes it, and says so when PCSCF= differs; the next fresh registration moves to PCSCF= and moves back when it fails before the SA setup and the old registration still stands (its address still on the link), as it already did between addresses, and its fallback Route is the P-CSCF it registers at, set before the 200's Service-Route is looked for — an empty Service-Route value counts as none — so a move never keeps the previous node's route. A file left by an attempt that got through the SA setup and did not live to record — to this or another P-CSCF — is recognised by its SA pair: the file's spi_uc/spi_us (a 0.3.x file carries them too) against the kernel's (FileNamesAnotherPair, Imsd:Ipsec, pinned in tests/Ipsec), instead of resumed with the wrong dialog; the state file gains pcscf, named in that line. Both fresh paths — the bring-up's and recovery's — now set their target themselves: with no PCSCF=, a bring-up that did not resume fails with its own message, and since no fresh one follows: a resumable pair whose attempt failed stays for the restart to resume, a pair nothing can resume — one the engine's rule wrote off during the attempt among them, a refresh refused with a 403 that carries a Retry-After or a binding a NOTIFY terminated under the re-REGISTER wait, decided once after both catch arms by its verdict (Reconnectable(), and with no fresh target Fresh(): a 401, a refusal with a Retry-After, the second refusal — with no fresh target every refusal reaches the reducer and its count travels in the holds, so the restart's refusal is the second, while with a target only a Retry-After does, as before — a refusal without one is not counted and the fresh registration follows at once; without the count a refused no-target resume would re-REGISTER on the same Call-ID at every RestartSec, the F16 loop) — is removed so the next bring-up finds nothing — and a recovery step that needs one restarts the daemon; the "PCSCF not set" check at the top of BringUp is gone, so a registration can be resumed with no setting at all. Three journal lines of the fresh-target path change with it: `resume connect failed; falling back to fresh` and `state file transport differs from SIP_TRANSPORT; fresh` end in `the next registration is a fresh one`, and a resume the engine writes off (a 403 with a Retry-After, a binding a NOTIFY terminated under the wait) logs `resume failed: … — written off by the network: the next registration is a fresh one` (§7.8). `no reg state file; resume falls back to fresh` keeps its text with a fresh target and ends in `nothing can resume it: the pair is removed` without one; the new `the state file names another SA pair (0x…/0x…[ to X]) than the kernel's (0x…/0x… to Y): another attempt's; …` line takes the same two tails. Tested: crafter-build test, 7 passed (tests/Engine: the refusal count's travel through the holds); the resume on the SA peer with the fresh target absent in builds of this series on the dev phone (KPN), and the no-target bring-up there with a resume that failed on a transport mismatch (the pair kept, the restart resumed) and with the state file removed (the pair removed, the next bring-up found nothing); the two dead-resume lines' no-target tail — a missing file, a file with another pair's SPIs — and the pair's removal on the tip's host build (bench 23f: a fake modem on PATH, a real xfrm in a namespace; a file with the pair's SPIs but another P-CSCF's address passes the check and the resume runs — `RESUME via existing SA`, the connect then failing in the namespace); on the dev phone (bench 41, the tip's build) a resume on a file without its pcscf key, the live pair's SPIs. |
||
| .forgejo/workflows | ||
| implementations | ||
| interfaces | ||
| packaging | ||
| tests | ||
| .gitignore | ||
| AGENTS.md | ||
| LICENSE | ||
| project.cpp | ||
| README.md | ||
imsd
Userspace IMS/VoLTE daemon for mainline Linux phones.
Most Linux phones drive the modem's internal IMS engine. imsd implements the whole IMS client in userspace instead: SIP registration with USIM AKA authentication over kernel IPsec (ESP), call signalling, and the AMR-WB RTP media plane wired into PipeWire so a stock mobile dialer like Plasma Dialer or GNOME Calls under Phosh can place and receive real VoLTE calls on a commercial network.
Status
Call-capable, both directions: outgoing calls place, answer, carry full-duplex
AMR-WB audio and tear down. Incoming calls ring, answer and carry media the
same way, driven end-to-end from a stock dialer over a frozen D-Bus ABI.
Not there yet: DTMF (SendDtmf is a stub), hold/multiparty/call waiting,
USSD, P-CSCF discovery (the address is configured by hand).
Verified by community members to be fully working:
| Device | OS | Carrier |
|---|---|---|
| The Fairphone (Gen. 6) | postmarketOS, Linux 7.1.2 | KPN NL |
| The Fairphone (Gen. 6) | postmarketOS, Linux 7.1.2 | Telekom Deutschland GER |
| The Fairphone (Gen. 6) | postmarketOS, Linux 7.1.2 | Phonero |
| The Fairphone (Gen. 6) | postmarketOS, Linux 7.1.2 | Telia Norge |
What it needs
imsd talks to the modem through ModemManager plus qmicli over QRTR, installs
its security associations with ip xfrm and plays audio through PipeWire, so
in practice: a Qualcomm modem on a mainline kernel with working
WWAN/ModemManager integration, kernel ESP, PipeWire, systemd, polkit and
your carrier's P-CSCF address.
Install and configure
For automatic updates add the Catcrafts Alpine repository. Note this does also pull in other packages.
Otherwise just download the latest imsd and imsd-systemd APKs and install them.
Both can be found in the packages tab:
https://forgejo.catcrafts.net/Catcrafts/-/packages/alpine/imsd
Configuration is environment variables in /etc/imsd.env; the one setting a fresh registration
needs is the P-CSCF:
# your carrier's P-CSCF address, capture via: `adb shell dumpsys telephony.registry` on Android
PCSCF=2001:db8::105
The apk's imsd.service is enabled by preset and starts at boot once that
file exists (the condition is checked when the unit starts, so after writing
the file run systemctl start imsd). It first brings the ims PDN up through ModemManager, then registers:
resuming an existing registration when it can, registering fresh otherwise,
and waiting out whatever the network tells it to wait out. Check on it with:
journalctl -u imsd -f
busctl --system call net.catcrafts.IMS1 /net/catcrafts/IMS1 net.catcrafts.IMS1 GetStatus
Dialers
imsd itself is desktop-agnostic: everything a dialer needs is on the system
bus as net.catcrafts.IMS1. A small translation daemon per desktop speaks
the backend protocol its dialer already consumes, so dialer, shell and the
call-history/contacts stack run unmodified.
| Desktop | Daemon | Package | Owns | Consumed by |
|---|---|---|---|---|
| Plasma Mobile | imsd-dialerd |
imsd |
org.kde.telephony.* (session bus) |
plasma-dialer + kde-telephony-daemon, replacing modem-daemon |
| Phosh / GNOME Mobile | imsd-ofonod |
imsd-ofono |
org.ofono (system bus) |
GNOME Calls' ofono provider plugin |
Plasma Mobile needs nothing beyond the imsd package: imsd-dialerd is
autostarted in the session in place of plasma-dialer's modem-daemon, whose
own autostart must be off — the package hides it for accounts created after
the install (/etc/skel); an existing account hides it itself with a
Hidden=true copy of org.kde.modem.daemon.desktop in ~/.config/autostart.
For Phosh and GNOME Mobile, apk add imsd-ofono enables imsd-ofonod and
points GNOME Calls at its ofono provider (a gschema override; the per-user
equivalent is gsettings set org.gnome.Calls autoload-plugins "['ofono']").
Do not run it alongside a real ofonod.
Call control is polkit's net.catcrafts.IMS1.Voice: the active local
session and root may place, answer and end calls; an ssh login may not.
Full config:
| Variable | Default | Meaning |
|---|---|---|
PCSCF |
(none) | P-CSCF address (IPv6), exactly one — not a comma-separated list — in RFC 5952 §4 form (lowercase, leading zeros dropped, the longest zero run compressed, no brackets — what ip prints for a plain IPv6 address; an IPv4-mapped address only as hex, ::ffff:a00:1 — the dotted spelling RFC 5952 §5 and ip use for it is refused); upper case, leading zeros, an uncompressed run or brackets are refused at start with the spelling to use (in the packaged unit the bring-up script refuses brackets first, with the rule), a dotted-quad tail with the rule; before 1.0.0 an upper-case, zero-padded or uncompressed PCSCF= matched no SA in ip xfrm's text and registered fresh at every restart — an upgraded phone with such a setting stops at start with the spelling to use. It is where a fresh registration goes; a registration resumed from the kernel's SAs stays on the P-CSCF it was made to until its next fresh registration. Without it a fresh registration fails with a clear error |
PCSCF_PORT |
5060 |
unprotected SIP port for the initial REGISTER |
DEV |
qmapmux0.0 |
ims-PDN netdev; the packaged service passes the real one via /run/imsd.env |
LOCAL |
(auto) | UE address (compared in RFC 5952 form). The packaged service gets the PDN address ModemManager assigned, via /run/imsd.env from ims-pdn-up.sh; a manual run prefers a global IPv6 on DEV that is neither temporary nor dynamic (RA-derived), then any non-temporary one, then the first (the kernel's temporary SLAAC address is listed first, and a registration bound to it is lost when the kernel retires it) |
USER_AGENT |
imsd/<version> |
REGISTER User-Agent. Some networks fingerprint UAs; setting your device's stock build string reproduces the stock modem's registration exactly. Empty omits the header |
STATE_FILE |
/var/lib/imsd/imsreg.state (root) / $XDG_STATE_HOME/imsd/imsreg.state |
persisted registration context for warm resume |
HOLDS_FILE |
/run/imsd.holds (root) / $XDG_RUNTIME_DIR/imsd.holds (/tmp/imsd.holds without a runtime dir) |
the waits the network imposed (a Retry-After, the refusal schedule), where that schedule stands whether the old registration is gone (old_gone) and the refusal count (refusals: a resume refused without a Retry-After at a start with no fresh target is one, the restart's the second), kept across a restart of imsd for the PDN they were set on — not across a reboot; /dev/null switches the file off (only a regular file is ever removed; anything else is emptied). imsd-handover.sh honours it too |
RESUME |
auto |
0 forces a fresh registration (ignores a warm SA) where there is a fresh target; with none the untried pair is removed and the bring-up ends as AGENTS §7.2 (the daemon's own bring-up) step 1 says |
REFRESH_INTERVAL |
(auto) | keepalive re-REGISTER period in s; default = half the granted expiry, clamped to [120, 1800] |
EALG |
aes-cbc |
offered ESP cipher (aes-cbc, des-ede3-cbc, null). From the 401's Security-Server list imsd selects the highest-preference ipsec-3gpp mechanism that matches this offer (RFC 3329 §2.3.1) and takes the SPIs/ports from the entry carrying them (some cores list every mechanism they support and put the SPIs on the one they applied); when no entry matches, the P-CSCF's SPI-carrying entry is installed as listed (hmac-md5-96, an absent ealg = null) and the journal says so. The line, the selection and the SA parameters are logged at every fresh registration |
SIP_TRANSPORT |
auto |
transport of the protected leg (the second REGISTER and everything after it): tcp, udp, or auto = TCP, falling back to a fresh registration over UDP when the P-CSCF leaves two TCP connects unanswered — but only on a phone that has never registered over TCP: once the state file records a TCP registration, a silent connect is treated as an outage, not a policy (delete the file or set udp to override, e.g. after a SIM change). The challenge (first REGISTER) is always UDP. Over UDP a REGISTER or INVITE larger than ~1.2 KB leaves as IPv6 fragments at the ims PDN's 1280-byte MTU (the journal says so once per flow); there are no SIP retransmission timers over UDP yet, so a lost datagram costs a timeout. The SAs, the listener and the firewall rule cover both transports |
EMERGENCY_NUMBERS |
(empty) | comma-separated additions to the builtin 112/911 emergency numbers (e.g. a private test core's short code). SIM EF_ECC is not read yet. imsd-ofonod reads it too, for the oFono EmergencyNumbers property |
RTP_PORT |
50004 |
local RTP port advertised in SDP |
PRECOND |
0 |
1 offers SDP QoS preconditions |
CODECS |
(empty — defaults) | comma-separated codec preference list over AMR-WB, AMR (or AMR-NB), PCMA, PCMU: restricts and orders both the codecs offered on an outgoing call and those accepted from an inbound offer (default: offer AMR-WB + AMR, accept all four in that order). A bench knob — a network whose gateway transcodes every caller up to AMR-WB otherwise never lets the narrowband path run |
DUMP_SIP |
0 |
1 writes raw REGISTER-200/SUBSCRIBE-200 dumps, the last refused REGISTER or SUBSCRIBE final (imsd-register-fail.raw, imsd-subscribe-fail.raw), the last inbound INVITE (imsd-invite-in.raw) and the last outgoing INVITE (imsd-invite-out.raw), mode 0600, for debugging — they contain your IMSI/MSISDN and addresses. A refused REGISTER or SUBSCRIBE is logged with its status line and any Retry-After / Warning / Reason / Server headers |
DUMP_DIR, OUT_DIR |
state dir | where dumps / per-call media stats land |
IMSD_MEDIA |
(auto) | path to imsd-media (default: next to imsd, else /usr/libexec/imsd-media) |
The protected client/server ports are fixed at 45061/45062
(imsd::util::PortUc/PortUs) — changing them in source also requires
updating the firewall rules ims-pdn-up.sh installs.
imsd-media (per-call, set through imsd's environment)
| Variable | Default | Meaning |
|---|---|---|
MIC, PLAY |
1, 1 |
uplink mic capture / downlink playout via PipeWire, as imsd passes them (imsd-media started by hand defaults both to off) |
AUDIO_USER |
(auto) | account whose PipeWire session carries call audio; imsd sets it per call from logind's seat0 session. Set in imsd's own environment it pins an account instead |
GAIN, PLAY_GAIN |
10, 1.0 |
uplink / downlink gain, as imsd passes them (imsd-media started by hand defaults GAIN to 1.0) |
AMR_MODE |
2 |
AMR encoder mode of whichever AMR codec is active, as imsd passes it (12.65 kbit/s for AMR-WB; imsd-media started by hand defaults to 2 for AMR-WB and 7 for AMR) |
DTX |
0 |
encoder discontinuous transmission |
MEDIA_TIMEOUT |
6.0 |
seconds of downlink silence before exit 3 (far-end-hangup signal) |
RTP_DUMP |
0 |
1 captures raw downlink RTP next to the stats file |
D-Bus ABI
net.catcrafts.IMS1 at /net/catcrafts/IMS1. The ABI is frozen.
| Member | Signature |
|---|---|
Dial(number) |
s → s (callUni) |
HangUp(callUni) |
s |
Accept(callUni) |
s |
SendDtmf(callUni, tones) |
ss |
GetCalls() |
→ aa{sv} |
GetStatus() |
→ a{sv} |
CallAdded |
s a{sv} |
CallStateChanged |
s s s (callUni, state, reason) |
CallDeleted |
s |
RegistrationChanged |
b |
Both imsd-dialerd and imsd-ofonod are users of this ABI.
A new desktop needs a new translation daemon, not changes here.
License
GPL-3.0-only — see LICENSE.
Copyright
Copyright (C) 2026 Catcrafts® catcrafts.net