Jorijn van der Graaf
6e77823933
Userspace VoLTE/IMS daemon for mainline Linux phones (developed on the Fairphone 6): a GLib-free core (SIP, SDP, USIM AKA, IPsec SA setup, RTP media, call engine) behind a GDBus control daemon, a standalone AMR-WB media leg, and a Plasma Dialer backend. C++26 modules built with Crafter Build; the tree is clean under the project's house-style linter (crafter-build lint) across all three build products. Assisted-by: Claude:claude-fable-5 Signed-off-by: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>
215 lines
10 KiB
Markdown
215 lines
10 KiB
Markdown
<!-- SPDX-License-Identifier: GPL-3.0-only -->
|
||
<!-- SPDX-FileCopyrightText: Copyright (C) 2026 Catcrafts® -->
|
||
|
||
# imsd
|
||
|
||
Userspace IMS/VoLTE daemon for mainline Linux phones.
|
||
|
||
> [!WARNING]
|
||
> imsd currently cannot make emergency calls
|
||
|
||
Modem firmware on typical mainline-Linux phones will bring up the IMS PDN but
|
||
can't be used for actual call audio. imsd implements the whole IMS client in
|
||
userspace instead: SIP registration with USIM AKA authentication over kernel
|
||
IPsec (ESP), call signalling, and the AMR-WB RTP media plane wired into
|
||
PipeWire — so a stock Plasma Mobile dialer can place and receive real VoLTE
|
||
calls on a commercial network.
|
||
|
||
## Status
|
||
|
||
Call-capable, both directions. Outgoing VoLTE calls place, answer, carry
|
||
full-duplex AMR-WB audio, and tear down; incoming calls ring, answer via
|
||
`Accept`, and carry media the same way — driven end-to-end from a stock
|
||
dialer over the frozen D-Bus ABI. Current state:
|
||
|
||
| Piece | State |
|
||
|---|---|
|
||
| SIP message layer + TCP framing (`Imsd:Sip`) | done, tested |
|
||
| SDP offer/answer for AMR-WB (`Imsd:Sdp`) | done, tested |
|
||
| USIM AKA + AKAv1-MD5 digest, SIM parsers (`Imsd:Aka`) | done, tested |
|
||
| IPsec SA commands + warm-SA reader (`Imsd:Ipsec`) | done, tested |
|
||
| SIP request/response builders (`Imsd:Messages`) | done, byte-pinned |
|
||
| Outgoing + incoming call state machine (`Imsd:Engine`) | done, tested |
|
||
| Registration (fresh + warm resume + keepalive refresh, MMTEL feature tags) | done |
|
||
| RTP + AMR-WB media plane into PipeWire (`imsd-media`) | done |
|
||
| D-Bus service `net.catcrafts.IMS1` (register, Dial, Accept, HangUp, live media) | done |
|
||
| Plasma Dialer session backend (`imsd-dialerd`, org.kde.telephony.*) | done |
|
||
| DTMF (`SendDtmf`, RFC 4733) | not yet implemented |
|
||
|
||
The engine core (`imsd-core`) is a GLib-free, pure-`std` static library whose
|
||
every decision — SIP framing, SDP selection, the AKAv1-MD5 digest, the
|
||
`ip xfrm` command sequence, and the whole call FSM — is unit-tested on a dev
|
||
box with no bus, modem, or phone; several suites pin output byte-for-byte
|
||
against recorded network traffic. GLib/GDBus, sockets, and subprocess control
|
||
live only in the `imsd` daemon shell.
|
||
|
||
## Architecture
|
||
|
||
C++26 modules, built with Crafter Build. Four build products:
|
||
|
||
- **imsd-core** (static library) — the engine, pure `import std` C++ with no
|
||
GLib and no I/O side effects. Everything here is unit-testable on any dev
|
||
box without a modem, a bus, or a phone; several suites pin output
|
||
byte-for-byte against recorded network traffic.
|
||
- **imsd** (executable) — the daemon shell: GLib main loop, GDBus service,
|
||
sockets, subprocess control (`qmicli`/`mmcli`/`ip`), and the registration
|
||
sequence + run loop that pumps the core. All GLib and I/O live here.
|
||
- **imsd-media** (executable) — the RTP/AMR-WB data plane, spawned once per
|
||
call. Pure `import std` + POSIX, no GLib; links `-ldl` and dlopen's the
|
||
codecs. A separate process for crash isolation and the far-end-hangup
|
||
exit-code contract.
|
||
- **imsd-dialerd** (executable) — the Plasma Mobile integration: a session
|
||
daemon owning `org.kde.telephony.{CallUtils,DeviceUtils,UssdUtils}`,
|
||
bridging them to imsd on the system bus. GDBus translation only, no core.
|
||
It is a separate process because those are per-user *session*-bus names
|
||
that the root system daemon cannot own; built with `-- --product=dialerd`,
|
||
autostarted from an `.desktop` file in place of plasma-dialer's
|
||
`modem-daemon` (whose autostart must be disabled).
|
||
|
||
### Terminating-network dependency (incoming)
|
||
|
||
A UE only receives a VoLTE call as a SIP INVITE if the network's Terminating
|
||
Access Domain Selection (T-ADS) routes it to the PS/IMS domain rather than
|
||
paging the modem over CS. That requires the IMS registration to advertise
|
||
voice capability — the MMTEL ICSI (`+g.3gpp.icsi-ref=...mmtel`) and
|
||
`+sip.instance` media-feature tags in the REGISTER Contact, which
|
||
`Imsd:Messages` emits. T-ADS may still select CS for reasons outside the
|
||
client's control (operator policy, the modem's own radio-capability
|
||
signalling, a competing registration). When it does, no INVITE reaches imsd;
|
||
that is a network/modem-integration matter, not a daemon defect.
|
||
|
||
## Supported hardware & carriers
|
||
|
||
imsd talks to the modem through ModemManager plus `qmicli` over QRTR (USIM
|
||
AKA via a UIM logical channel), so in practice it currently needs a Qualcomm
|
||
modem on a mainline kernel with working WWAN/MM integration, kernel ESP
|
||
(`ip xfrm`), and PipeWire for audio.
|
||
|
||
Everything below has been verified on exactly **one device / one carrier**
|
||
(n=1) — reports from other combinations are very welcome:
|
||
|
||
| Device | OS | Modem | Carrier | Status |
|
||
|---|---|---|---|---|
|
||
| Fairphone 6 (SM7635 "milos") | postmarketOS, mainline kernel | Qualcomm (QRTR/QMI) | KPN NL (eSIM) | MO + MT calls, full-duplex AMR-WB |
|
||
|
||
Carrier-side assumptions that held on this network but may differ elsewhere:
|
||
IPsec sec-agree with AKAv1-MD5 over IPv6, AMR-WB audio, TCP for the
|
||
protected flows. The SIP/SDP/AKA layers are carrier-agnostic and unit-tested;
|
||
the bring-up sequencing is where new networks will differ.
|
||
|
||
## Build
|
||
|
||
[Crafter Build](https://forgejo.catcrafts.net/Catcrafts/Crafter.Build) +
|
||
gio-2.0 headers (`glib2` on Arch, `glib-dev` on Alpine).
|
||
|
||
```sh
|
||
crafter-build # bin/imsd-<target>-<march>/imsd (the daemon)
|
||
crafter-build -- --product=media # bin/imsd-media-.../imsd-media (the media leg)
|
||
crafter-build -- --product=dialerd # bin/imsd-dialerd-.../imsd-dialerd (dialer backend)
|
||
crafter-build test # unit tests (Util, Aka, Ipsec, Messages, Engine, Sip, Sdp)
|
||
```
|
||
|
||
### Cross-compiling for a phone (aarch64 Alpine/postmarketOS)
|
||
|
||
```sh
|
||
packaging/make-sysroot.sh # one-time: Alpine aarch64 sysroot from the CDN
|
||
crafter-build -- --target=aarch64-alpine-linux-musl \
|
||
--sysroot=$HOME/.cache/imsd/sysroot-aarch64-alpine \
|
||
--march=armv8-a --mtune=generic
|
||
# same flags after `crafter-build test --target=aarch64-alpine-linux-musl`
|
||
# run the suite under qemu-aarch64 against the sysroot
|
||
```
|
||
|
||
## Run (development)
|
||
|
||
```sh
|
||
./bin/imsd-*/imsd --session # own net.catcrafts.IMS1 on the session bus
|
||
busctl --user call net.catcrafts.IMS1 /net/catcrafts/IMS1 net.catcrafts.IMS1 GetStatus
|
||
```
|
||
|
||
On a phone the daemon runs as root on the system bus (policy in
|
||
`packaging/net.catcrafts.IMS1.conf` — it grants the postmarketOS default
|
||
account `user` access; adjust it alongside `AUDIO_USER` if your session
|
||
account is named differently), started by `packaging/imsd.service`
|
||
after `packaging/ims-pdn-up.sh` has brought up the ims PDN through
|
||
ModemManager. It spawns `/usr/libexec/imsd-media` per call. Registration
|
||
resumes an in-kernel IPsec SA when one is present (avoiding the network's
|
||
fresh-SA throttle) and keeps itself alive with a re-REGISTER refresh at half
|
||
the granted lifetime. `packaging/APKBUILD.binary` + `make-bin-tarball.sh`
|
||
wrap a cross-compiled build into an apk.
|
||
|
||
## Configuration
|
||
|
||
Everything is environment variables. The packaged unit reads
|
||
`/run/imsd.env` (written by `ims-pdn-up.sh`: the connected ims netdev) and
|
||
then `/etc/imsd.env` (your configuration, wins on conflict). Minimum viable
|
||
`/etc/imsd.env`:
|
||
|
||
```sh
|
||
# REQUIRED until P-CSCF discovery from the PDN's PCO is implemented: your
|
||
# carrier's P-CSCF address. Find it in a stock-firmware capture or your
|
||
# carrier's IMS documentation.
|
||
PCSCF=2001:db8::105
|
||
```
|
||
|
||
### imsd
|
||
|
||
| Variable | Default | Meaning |
|
||
|---|---|---|
|
||
| `PCSCF` | *(none — required)* | P-CSCF address; without it registration fails with a clear error |
|
||
| `PCSCF_PORT` | `5060` | unprotected SIP port for the initial REGISTER |
|
||
| `DEV` | `qmapmux0.0` | ims-PDN netdev; the packaged service passes the real one via `/run/imsd.env` |
|
||
| `LOCAL` | *(auto)* | UE address; default = the global IPv6 on `DEV` |
|
||
| `USER_AGENT` | `imsd/<version>` | REGISTER User-Agent. Some networks fingerprint UAs; setting your device's stock build string reproduces the stock modem's registration exactly. Empty omits the header |
|
||
| `STATE_FILE` | `/var/lib/imsd/imsreg.state` (root) / `$XDG_STATE_HOME/imsd/imsreg.state` | persisted registration context for warm resume |
|
||
| `RESUME` | `auto` | `0` forces a fresh registration (ignores a warm SA) |
|
||
| `REFRESH_INTERVAL` | *(auto)* | keepalive re-REGISTER period in s; default = half the granted expiry, clamped to [120, 1800] |
|
||
| `EALG` | `aes-cbc` | offered ESP cipher (`aes-cbc`, `des-ede3-cbc`, `null`) |
|
||
| `RTP_PORT` | `50004` | local RTP port advertised in SDP |
|
||
| `PRECOND` | `0` | `1` offers SDP QoS preconditions |
|
||
| `DUMP_SIP` | `0` | `1` writes raw REGISTER-200/SUBSCRIBE-200/INVITE dumps (mode 0600) for debugging — they contain your IMSI/MSISDN and addresses |
|
||
| `DUMP_DIR`, `OUT_DIR` | state dir | where dumps / per-call media stats land |
|
||
| `IMSD_MEDIA` | *(auto)* | path to `imsd-media` (default: next to `imsd`, else `/usr/libexec/imsd-media`) |
|
||
|
||
The protected client/server ports are fixed at 45061/45062
|
||
(`imsd::util::kPortUc`/`kPortUs`) — changing them in source also requires
|
||
updating the firewall rules `ims-pdn-up.sh` installs.
|
||
|
||
### imsd-media (per-call, set through imsd's environment)
|
||
|
||
| Variable | Default | Meaning |
|
||
|---|---|---|
|
||
| `MIC`, `PLAY` | `1`, `1` | uplink mic capture / downlink playout via PipeWire |
|
||
| `AUDIO_USER` | `user` | desktop user whose PipeWire session carries call audio (postmarketOS default account) |
|
||
| `GAIN`, `PLAY_GAIN` | `10`, `1.0` | uplink / downlink gain |
|
||
| `AMR_MODE` | `2` | AMR-WB encoder mode (0–8) |
|
||
| `DTX` | `0` | encoder discontinuous transmission |
|
||
| `MEDIA_TIMEOUT` | `6.0` | seconds of downlink silence before exit 3 (far-end-hangup signal) |
|
||
| `RTP_DUMP` | `0` | `1` captures raw downlink RTP next to the stats file |
|
||
|
||
## D-Bus ABI
|
||
|
||
`net.catcrafts.IMS1` at `/net/catcrafts/IMS1`. The ABI is frozen — dialer
|
||
integrations depend on it:
|
||
|
||
| Member | Signature |
|
||
|---|---|
|
||
| `Dial(number)` | `s → s` (callUni) |
|
||
| `HangUp(callUni)` | `s` |
|
||
| `Accept(callUni)` | `s` |
|
||
| `SendDtmf(callUni, tones)` | `ss` |
|
||
| `GetCalls()` | `→ aa{sv}` |
|
||
| `GetStatus()` | `→ a{sv}` |
|
||
| `CallAdded` | `s a{sv}` |
|
||
| `CallStateChanged` | `s s s` (callUni, state, reason) |
|
||
| `CallDeleted` | `s` |
|
||
| `RegistrationChanged` | `b` |
|
||
|
||
## License
|
||
|
||
GPL-3.0-only — see [LICENSE](LICENSE).
|
||
|
||
## Copyright
|
||
|
||
Copyright (C) 2026 Catcrafts®
|
||
catcrafts.net
|