Jorijn van der Graaf
9456e5092f
The Plasma Mobile archive was fp6-img.tar.xz and the Phosh one fp6-img-phosh.tar.xz, so the unmarked one looked like the only one. Both are now fp6-img-<shell>.tar.xz and extract to a directory of that name; install.sh's messages and the README say so, and the README names the dialer each shell calls with. The release upload takes dist/* and needs no change.
2 KiB
fp6-img
Flashable postmarketOS images for the
Fairphone 6/6+, built nightly from the
Catcrafts milos-linux
combined-stable kernel branch, with
imsd (userspace VoLTE)
preinstalled.
Maintained by Jorijn van der Graaf (TheMightyCat) at Catcrafts.
What works
Everything on the combined-stable branch: display, touch, wifi, cellular
data, NFC (reader), speaker audio, microphone, IMU, magnetometer, barometer,
ambient light/proximity, fingerprint unlock through
fingerprintd, plus
VoLTE calls (both directions) through imsd.
Flashing
Download fp6-img-{DE}.tar.xz with your preferred DE from the latest release
({DE} is plasma for Plasma Mobile, calls through Plasma Dialer, or phosh for
Phosh, calls through GNOME Calls) and unlock the bootloader
(Fairphone's official process).
Install: with the phone in fastboot mode,
tar xf fp6-img-{DE}.tar.xz
cd fp6-img-{DE}
./install.sh
install.sh erases dtbo, flashes the rootfs, RAM-boots the kernel, writes the boot partition from
inside Linux where the bootloader's NV-wipe cannot see it, then reads the modem
NV back and reports the result. The bootloader never writes boot.
Default login: user / 147147 (same as official postmarketOS images).
Never re-lock the bootloader with a custom image installed.
VoLTE configuration
imsd is installed but needs your carrier's P-CSCF address:
# /etc/imsd.env
PCSCF=<your carrier's P-CSCF IPv6 address>
Find it via android adb using adb shell dumpsys telephony.registry, then
systemctl restart imsd (the service is enabled at boot and waits for this
file to exist). See the
imsd README for the full
variable reference and carrier assumptions.