fp6-img/README.md
Jorijn van der Graaf ccf23abf81 install.sh: one-command modem-preserving installer
erase dtbo + flash userdata + RAM-boot + dd boot_a from Linux + verify
modem NV and report honestly. Shipped in dist/ with every release; README
points at it. The one believed-safe-but-unisolated step (userdata flash)
is self-verified by the script's final check.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-08-09 01:29:17 +02:00

114 lines
4.6 KiB
Markdown

# fp6-img
Flashable [postmarketOS](https://postmarketos.org/) images for the
**Fairphone 6**, built nightly from the
[Catcrafts milos-linux](https://forgejo.catcrafts.net/Catcrafts/milos-linux)
`combined-stable` kernel branch, with
[imsd](https://forgejo.catcrafts.net/Catcrafts/imsd) (userspace VoLTE)
preinstalled.
Maintained by [Jorijn van der Graaf](https://catcrafts.net/about)
(TheMightyCat) at [Catcrafts](https://catcrafts.net/).
> [!CAUTION]
> **Emergency calling is unverified.** Calls (including 112/911) go through
> imsd, whose emergency path is spec-shaped but has never been verified
> against a live network.
## What works
Everything on the `combined-stable` branch: display, touch, wifi, cellular
data, NFC (reader), speaker audio, microphone, IMU, magnetometer, barometer,
ambient light/proximity — plus VoLTE calls (both directions) through imsd.
Verified on exactly one device / one carrier (KPN NL). Reports from other
carriers are very welcome.
## Flashing
Download `boot.img` and `fairphone-fp6.img` from the latest release and unlock
the bootloader ([Fairphone's official process](https://support.fairphone.com/hc/en-us/articles/10492476238737)).
**Recommended — modem-preserving install**: with the phone in fastboot mode,
run [`install.sh`](install.sh) (also attached to every release) from the
directory holding the two images:
```sh
sh install.sh
```
It erases dtbo, flashes the rootfs, **RAM-boots** the kernel (`fastboot
boot` — verified to write nothing), writes the boot partition from inside
Linux where the bootloader's NV-wipe cannot see it, then reads the modem NV
back and reports the result. The bootloader never writes `boot`.
**Classic install** (simpler, but `fastboot flash boot` **zeroes the modem's
NV** — cellular will be dead until you restore your `modemst` backup):
```sh
fastboot flash userdata fairphone-fp6.img
fastboot flash boot boot.img
fastboot erase dtbo
fastboot reboot
```
Default login: `user` / `147147` (same as official postmarketOS images —
change it). **Never re-lock the bootloader** with a custom image installed.
> [!WARNING]
> **`fastboot flash boot` zeroes the modem's NV storage on this device**
> (`modemst1`/`modemst2`) — verified by isolation experiment; `fastboot erase
> dtbo` and idle fastboot sessions are safe. Afterwards the modem reports no
> IMEI and neither SIM slot answers (`no-atr-received`), eSIM included. The
> eSIM profiles themselves are safe in the eUICC; stock Android silently
> re-provisions the NV from `fsg` on boot, postmarketOS cannot.
>
> Practical rules:
> - **Back up first**: from a running postmarketOS (or rooted stock), `dd`
> `/dev/disk/by-partlabel/modemst1` and `modemst2` to files, keep forever.
> - **After install, restore them**: `dd` back and reboot — cellular returns.
> - **Never update the kernel via fastboot** — installed systems update boot
> through on-device `boot-deploy` (which apk kernel upgrades run
> automatically), never tripping the wipe.
## VoLTE configuration
imsd is installed but needs your carrier's P-CSCF address:
```sh
# /etc/imsd.env
PCSCF=<your carrier's P-CSCF IPv6 address>
```
Find it in a stock-firmware capture or your carrier's IMS documentation, then
`systemctl restart imsd` (the service is enabled at boot and waits for this
file to exist). See the
[imsd README](https://forgejo.catcrafts.net/Catcrafts/imsd) for the full
variable reference and carrier assumptions.
## How it builds
`build.sh` drives [pmbootstrap](https://gitlab.postmarketos.org/postmarketOS/pmbootstrap)
with the `aports/` overlay in this repository:
- `device/linux-postmarketos-qcom-milos` — the pmaports kernel aport,
repointed at `combined-stable` (source tarball generated with git-archive;
the Forgejo instance serves no source archives) with the exact kernel
config the development FP6 runs.
- `modem/imsd` — imsd, packaged from source. Its `provides=81voltd` keeps the
conflicting modem-firmware IMS helper off the image (two IMS stacks cannot
share one PDN).
- `main/postmarketos-config-nftables` — adds the `-imsd` subpackage accepting
imsd's IPsec-protected SIP ports on the IMS PDN (auto-installed alongside
imsd).
## Roadmap
- [x] End-to-end pipeline validation (first complete image built 2026-08-08)
- [x] Speaker-audio userspace files (`soc-fairphone-fp6-audio`: topology,
amp config, UCM — byte-identical to the tested dev-phone set; blob
provenance to be settled before this repo goes public)
- [x] imsd in the image (pinned to the public 0.3.0 commit; the phone's
working call stack incl. callaudioshim and the modem-daemon autostart
override ship as packages)
- [ ] Nightly schedule once the first dispatched run is green